DESIGN AND CONSTRUCTION OF AN ALCOHOL DETECTOR IN AUTOMOBILES
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an alcohol detector in automobiles" Please, sit back and study the below research material carefully. This project topic "design and construction of an alcohol detector in automobiles" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an alcohol detector in automobiles" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an alcohol detector in automobiles" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF AN ALCOHOL DETECTOR IN AUTOMOBILES
BY
---
EE/H2013/01430
DEPARTMENT OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of an alcohol detector in automobiles" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.
By
Dr. --- Dr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Dr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work “design and construction of an alcohol detector in automobiles” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “design and construction of an alcohol detector in automobiles” visible for everyone, then the complete material on “design and construction of an alcohol detector in automobiles” is to be ordered for. Happy viewing!!!
Driving under the influence of alcohol has affected and killed countless of people’s lives. If you drink and drive, not only do you possibly put yourself at risk, but your passengers and pedestrians, and other people, who were on the roads. Every thirty minutes someone’s life is cut short and families are devastated. So, here we implemented a prototype version Alcohol Detection system in order to control drunk and driving. The Alcohol Detection system works on a simple principle, If a driver has been drinking, the alcohol breath analyser sensor will detect the level of alcohol in the driver’s breath and if it crosses a set threshold, an alert will come which will alert people around and passengers.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRCT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM AND OBJECTIVE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- PROJECT MOTIVATION
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- APPLICATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
2.0 LITERATURE REVIEW
2.1 REVIEW OF ALCOHOL SENSING
2.2 REVIEW OF ALCOHOL USAGE
2.3 BLOOD ALCOHOL CONTENT
2.4 REVIEW OF DIFFERENT ALCOHOL TESTING METHODS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BLOCK DIAGRAM OF THE SYSTEM
3.2 EXPLANATION OF BLOCK DIAGRAM
3.3 SYSTEM COMPONENT
3.4 SYSTEM OPERATION
3.5 SYSTEM CIRCUIT DIAGRAM
3.6 SYSTEM FLOW CHART
3.7 PROGRAM CODE
3.8 POWER SUPPLY UNIT
CHAPTER FOUR
4.0 RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE AND TESTING
4.2 ASSEMBLING OF SECTIONS
4.3 CONSRUCTION OF THE CASING
4.4 PACKAGING
4.5 MOUNTING PROCEDURE
4.6 TESTING
4.7 RESULT
CHAPTER FIVE
- CONCLUSIONS
- RECOMMENDATION AND FUTURE DEVELOPMENT
5.3 REFERENCES
CHAPTER ONE
- INTRODUCTION
1.1 BACKGROUND OF THE STUDY
The Nigerian government has been advising its citizens not to drink and drive for decades, but for the first time, it may be able to physically stop you from getting behind the wheel while hammered.
The main purpose behind this project is “Drunk driving detection”. Now a days, many accidents are happening because of the alcohol consumption of the driver or the person who is driving the vehicle. Thus Drunk driving is a major reason of accidents in almost all countries all over the world. Alcohol Detector in Car project is designed for the safety of the people seating inside the car. Alcohol breath analyzer project should be fitted / installed inside the vehicle.
The main unit of this project is an “Alcohol sensor”. If the person inside car has consumed alcohol then it is detected by the sensor. Sensor gives this signal to a comparator IC. The output of comparator is connected to the microcontroller. Microcontroller is the heart of this project. It is the CPU of the complete circuit. Microcontroller gives high pulse to the buzzer circuit and the buzzer is turned on. At the same time a relay is turned off. Due to this the ignition of the car is deactivated.
1.2 PROBLEM STATEMENT
Nowadays major accidents occur on road because of increase in traffic and rash or asleep driving of the drivers. Several accidents occur attributable to consumption of alcohol. So alcohol dinked driving is additionally vital reason for accident happens. The alcohol detection in-car system is supposed for the cover of humans seating within the car and in several things, would like the auto and police authority isn't hip in time. Because of this kind of accident, the help given to the sufferer is delayed.
1.3 OBJECTIVE OF THE PROJECT
The objective of this work is design a drunken driving detecting device, which detects the percentage of alcohol and displays the same on an LCD display. It also sounds an alarm if the amount of alcohol exceeds a particular amount.
1.4 PROJECT MOTIVATION
There is such a large amount of car users who drove a car with Consumption of alcohol, which is the reason for a most of car accidents. Also once Associate in an accident occurs at non-residential place or highways, in this condition most important is to offer primary aid (healing) service to injured human by the support of ambulance. So it was also necessary to include accident detection as well as location detection and this info given to the nearest police/ ambulance emergency service center help of wireless media like SMS (Short Message Service). This can help to reduce the number of accidents occur due to alcohol drunk consumption. In several car accidents there is a possibility of fire. Therefore during this dangerous situation to save individuals people life with the help of fire fighting blower to stop fire yet as data given to the nearest, police station, fire brigade and ambulance emergency service center. Proper seat belt detection is better than traditional seat belt detection. Sometimes there is a possibility of misuses safety harness lock using directly attach of extra safety harness buckle without pull of safety harness by a driver. Therefore car system detects attach the safety belt. By reducing this sort of misuse of safety harness detection within the vehicle, therefore necessary to detect correct seat belt.
1.5 PURPOSE OF THE PROJECT
The main purpose behind this project is “Drunk driving detection”. Thus Drunk driving is a major reason of accidents in almost all countries all over the world. Alcohol Detector in Car project is designed for the safety of the people seating inside the car.
1.6 APPLICATIONS OF THE PROJECT
Applications of Alcohol Detector in Car:
1) “Alcohol Detector project” can be used in the various vehicles for detecting whether the driver has consumed alcohol or not.
2) Breathing analyser project can also be used in various companies or organization to detect alcohol consumption of employees. Alcohol detection system in an automobile is a must feature which every cab or bus should have.
1.7 SIGNIFICANCE OF THE PROJECT
“Alcohol Detection System in Cars” provides an automatic safety system for cars and other vehicles as well.
The sensors can also aid an officer in the detection of alcohol during a stop, not to replace other more reliable and effective testing methods. This equipment helps provide law enforcement with tools to develop initial suspicion of someone breaking the law. Because they lack the precision of other tests and can detect alcohol from sources other than the suspected impaired driver
1.8 ADVANTAGES OF THE PROJECT
1. To prevent accident due to drunk and driving.
2. Easy and efficient to test the alcohol content in the body.
3. Quick and accurate results.
4. Helpful for police and provides and automatic safety systems for cars and other vehicles as well.
1.9 PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.
CHAPTER ONE: The complete chapter one of “design and construction of an alcohol detector in automobiles” is available. Order full work to download. Chapter one of “design and construction of an alcohol detector in automobiles”consists of the literature review. In this chapter all the related work on“design and construction of an alcohol detector in automobiles” was reviewed.
CHAPTER TWO: The complete chapter two of “design and construction of an alcohol detector in automobiles” is available. Order full work to download. Chapter two of “design and construction of an alcohol detector in automobiles” consists of the literature review. In this chapter all the related work on “design and construction of an alcohol detector in automobiles” was reviewed.
CHAPTER THREE: The complete chapter three of “design and construction of an alcohol detector in automobiles” is available. Order full work to download. Chapter three of “design and construction of an alcohol detector in automobiles” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of “design and construction of an alcohol detector in automobiles” is available. Order full work to download. Chapter four of “design and construction of an alcohol detector in automobiles” consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of “design and construction of an alcohol detector in automobiles” is available. Order full work to download. Chapter five of “design and construction of an alcohol detector in automobiles” consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.