phonelogo+234 8146561114 or +2347015391124
DESIGN AND FABRICATION OF A MOBILE WATER SPRINKLER IRRIGATION SYSTEM

USER'S INSTRUCTIONS: The project work you are about to view is on "design and fabrication of a mobile water sprinkler irrigation system". Please, sit back and study the below research material carefully. This project topic (design and fabrication of a mobile water sprinkler irrigation system) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and fabrication of a mobile water sprinkler irrigation system" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and fabrication of a mobile water sprinkler irrigation system" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their s[tudents to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

DESIGN AND FABRICATION OF A MOBILE WATER SPRINKLER IRRIGATION SYSTEM

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design and fabrication of a mobile water sprinkler irrigation system" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "design and fabrication of a mobile water sprinkler irrigation system" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and fabrication of a mobile water sprinkler irrigation system" visible for everyone, then the complete material on "design and fabrication of a mobile water sprinkler irrigation system" is to be ordered for. Happy viewing!!!


ABSTRACT

Costs of taking a water sprinkler to a remote area are high. Moreover, the use of diesel fuel is also more expensive in the “new lands” due to the remoteness of desert farms or a place wire fire accident occurs. Taking into account the costs of transportation, maintenance and overhauling of generators, using diesel will no longer be economically feasible or affordable for those farms in the near future. At the same time, Nigeria’s exporters lose competitiveness in the international market due to crop losses that were caused by lack of irrigation. High CO2 emissions, immense diesel spills into the soil and risky long distance transportation of diesel to the farms are just a few ecological downsides of diesel operated water pumps. This makes use mobile water sprinkler which allows the sprinkler to be move from one place to another when the need occurs. Movable water sprinkler is defined as a system that distributes water to targeted area.

 

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1      BACKGROUND OF THE STUDY

    1. BACKGROUND OF THE STUDY
    2. OBJECTIVE OF THE STUDY
    3. SIGNIFICANCE OF THE STUDY
    4. SCOPE OF THE STUDY
    5. PURPOSE OF THE STUDY

CHAPTER TWO

    1.      LITERATURE REVIEW
    2.      DESCRITION OF WATER SPRINKLER
    3.       TYPES OF WATER SPRINKLER
    4.      SPRINKLER CYLINDER

CHAPTER THREE
METHODOLOGY

    1. INTRODUCTION
    2. SPRINKLER NOZZLES
    3. SYSTEM DESCRIPTION
    4. WATER SPRINKLER EQUIPMENT
    5. SPRINKLER COMPONENTS
    6. DESIGN CALCULATION
    7. SPRINKLER INSTALLATION
    8. MAINTENANCE OF WATER SPRINKLER
    9. GUIDE TO SELECTING THE RIGHT SPRINKLER TYPE
    10. INSTALLATION ISSUES RELATED TO SPRINKLER SELECTION
    11. COST ISSUES IN SELECTING TYPE OF SPRINKLER
    12. COST ISSUES IN SELECTING TYPE OF SPRINKLER
    13. SELECTING THE MOST APPROPRIATE SPRINKLER SYSTEMS
    14. SELECTING SPRINKLER SYSTEM CAPACITY

CHAPTER FOUR
4.1         CONSTRUCTION PROCEDURE AND TESTING
4.2         ASSEMBLING OF SECTIONS
4.3         ECONOMIC OF THE PROJECT
4.4         PROJECT VIABILITY
4.5         RELIABILITY
4.6         MAINTAINABILITY
4.7         PROJECT EVALUATION
4.8         SELECTING SPRINKLER SYSTEM CAPACITY
4.9         CONSTRAINTS IN APPLICATION OF SPRINKLER IRRIGATION
4.10   OPERATION AND MAINTENANCE OF SPRINKLER SYSTEMS
4.11  TROUBLE SHOOTING
CHAPTER FIVE

    1. CONCLUSION
    2. RECOMMENDATION
    3. REFERENCES

 

CHAPTER ONE

    1. INTRODUCTION

In recent days, agriculture field farmers are facing many problems in watering their plants to keep their crops green in summer season. With hosepipe bans becoming more frequent thanks to global warming (and water companies not fixing the leaks which lose 50% of all treated water in the UK), more and more people are starting to collect rainwater and greywater for use in their gardens. The only problem is getting the water from where it is collected and stored, to where it is needed. It’s because they don’t have correct idea about the availability of the power. Even if the power is available, they have to wait until the pitch is properly watered. Thus this process restricts them to stop doing other deeds. But, there is a solution, i.e., movable water sprinkler allow them to move their sprinkler wherever the need occurs. A submersible pump controller is used to pump a water from a boor well to a storage water tank. Then, the water is drawn by a submersible pump at the slope’s toe, where the installed sprinklers water the crops or plants.
Movable Sprinkler systems are valuable for fire control even in places with electrical equipment, electronic equipment or computational. Water from an activated sprinkler may not help spread the fire, but it will damage the electrical equipment in it's application area due to short circuit. The water used in most sprinkler systems is commonly untreated tap water, some systems use additives to prevent water freezing or enhance water viscosity but they have no effect over water's electric conductivity.

1.2                                         BACKGROUND OF THE PROJECT
Water is a key factor in increasing agricultural production. About 78% of Nigeria’s water resources are used for agriculture out of this only 50% is actually used by plants and the remaining water resources are wasted either as deep percolation or as evaporation. Excess irrigation not only reduces crop production and damages soil fertility but also causes ecological hazards like water logging and salinity. With competitive use of water and its increasing scarcity, it has become imperative to economize water use for optimum productivity. This is possible only through improved water management and adopting advanced techniques of water sprinkler. One such method of modern irrigation is movable sprinkler irrigation system which is becoming more and more popular among the farmers across the country. Sprinkler irrigation system saves upto 50% of water compared to surface irrigation method and increases productivity by about 15-25 %. Until 1970, sprinkler irrigation system in India was used mostly in hilly area for plantation crops like tea and coffee. But thereafter it spread to other country where there was shortage of ground water for irrigation.
Today farmers in almost all the States in the country have progressively adopted this system and it is estimated that about 10 million ha can be brought under sprinkler irrigation system in Nigeria. Realizing the need for water use optimization in the context of water scarcity and increasing agricultural productivity.
Movable Sprinkler method distributes water to crops by spraying it over the crop area like a natural rainfall. The water under pressure flows through perforations or nozzles and sprays over the area. The pressure is provided by a pump of suitable capacity and horsepower. With careful selection of nozzle sizes, operating pressure and spacing, the actual water required for maintaining the soil moisture at field capacity is applied uniformly at a rate to suit the infiltration rate of soil thereby obtaining efficient water application. It is estimated that the sprinkler system substantially reduces the use of water and the crop productivity also increases.

1.3                                             OBJECTIVE OF THE PROJECT
The main objective of a movable sprinkler system is to design a movable device used to apply water as uniformly as possible to fill the root zone of the crop with water.

1.4                                         SIGNIFICANCE OF THE PROJECT
Movable water sprinkler is absolutely perfect for use with irrigation systems for gardens, allotments, greenhouses, and polytunnels. It can also be used to apply insecticide, pesticide to the crop. It is  the best device to water plants in the summer because it is easy to carry from one place to another.

1.5                                                 SCOPE OF THE PROJECT
Water Sprinkler is a method of applying irrigation water which is similar to rainfall. Water is distributed through a system of pipes usually by pumping. It is then sprayed into the air and irrigated entire soil surface through spray heads so that it breaks up into small water drops which fall to the ground.
Sprinklers provide efficient coverage for small to large areas and are suitable for use on all types of properties. It is also adaptable to nearly all irrigable soils since sprinklers are available in a wide range of discharge capacity.

1.6                                              PURPOSE OF THE PROJECT
Movable water sprinkler system is defined as a system that distributes water to targeted area.
Basically it is meant to fabricate a device “movable water sprinkler”, it can be used for agriculture purposes for applying water to the crop or applying insecticide/pesticide/ herbicide to the crop. The system can easily be moved from place to place.


CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and fabrication of a mobile water sprinkler irrigation system" is also available. Order full work to download. Chapter two of "design and fabrication of a mobile water sprinkler irrigation system" consists of the literature review. In this chapter all the related work on "design and fabrication of a mobile water sprinkler irrigation system" was reviewed.

CHAPTER THREE: The complete chapter three of "design and fabrication of a mobile water sprinkler irrigation system" is available. Order full work to download. Chapter three of "design and fabrication of a mobile water sprinkler irrigation system" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and fabrication of a mobile water sprinkler irrigation system" is available. Order full work to download. Chapter four of "design and fabrication of a mobile water sprinkler irrigation system" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design and fabrication of a mobile water sprinkler irrigation system" is available. Order full work to download. Chapter five of "design and fabrication of a mobile water sprinkler irrigation system" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logo