phonelogo+234 8146561114 or +2347015391124


USER'S INSTRUCTIONS: The project work you are about to view is on "remodelling of conference room floor finishes, window and furnitures". Please, sit back and study the below research material carefully. This project topic "remodelling of conference room floor finishes, window and furnitures" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "remodelling of conference room floor finishes, window and furnitures" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "remodelling of conference room floor finishes, window and furnitures" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.







This is to certify that the research work, "remodelling of conference room floor finishes, window and furnitures" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

External Invigilator

This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.


The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

PROJECT DESCRIPTION: This work "remodelling of conference room floor finishes, window and furnitures" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "remodelling of conference room floor finishes, window and furnitures" visible for everyone, then the complete material on "remodelling of conference room floor finishes, window and furnitures" is to be ordered for. Happy viewing!!!


          This project is anchored on the design and construction of Tiles, windows and furniture involves in the conference room their method and pattern of construction, it’s advantages value and as well other valuable tool such as; working tools for the construction o tiles; (cement, white cement, fine aggregate e.t.c); tools for the construction of windows; (nails and screws, drills e.t.c) and also tools for the construction of furniture
          Furthermore, the purpose of tiles, it values, it significance from other floor beauty materials, and also the types of tiles and the purposes of other types as differ.
          In addition too, this project covers the construction of different types of windows, even for the differential purpose, the value of different window structures as pertaining to it cost and the shapes as ficatured in the pictures .  

Title Page                                                                                           i
Certification                                                                                        ii
Dedication                                                                                          iii
Acknowledgement                                                                              iv
Abstract                                                                                             v
Table of content                                                                                 vi

1.0     Introduction                                                                             1
1.1     Aims and Objectives                                                                 2
1.2     Scopes of Study                                                                        3

2.0     Literature Review                                                                     4-
2.1     Ceramics, Tiles, And Manufacturing process.                             6       
2.2     Methods of Manufacturing Ceramic tiles                                    8-9
2.3     Type Glazed Ceramic tiles                                                         9
2.3.1  Glazed Ceramic tiles                                                                  10
2.3.2  Unglazed ceramic tiles                                                              10
2.4     Ceramic floor tile manufactures                                                 10
2.5     Packing grading and sorting of ceramic floor tiles                       11
2.6     Pattern formation with tiles                                                       12     
2.7     Methods of tiles placement                                                        12
2.8     Precaution that are necessary during tile placement                  15
2.9     Materials used for  tiling                                                            16
2.10   Tools necessary for ceramic floor tile.                                        17
2.11   Construction method                                                                18

3.0    Introduction to Aluminium Window                                           21
3.1     Important of window                                                                 21     
3.2     Different types of material used for window                               21
3.3     Glass, Aluminium and Burglary Metal Frame glass                      23     
3.3.1 Aluminium                                                                                24     
3.3.2  Metals                                                                                      26
3.4     Scope of project                                                                        27
3.5     Aim and objective                                                                     27
3.6     Material used                                                                            28
3.7     Properties of Metal                                                                    29
3.8     Properties of Aluminium                                                            30     
3.9     Properties of Glass                                                                    30
3.10   Properties of Rubber                                                                 31
3.11  Design and construction of Aluminium window and burglary
Frame for office use.                                                                 31
3.12   Finishing                                                                                  32
3.13   Joint and connection                                                                 33
3.14 Safety Precaution                                                                        34

4.0     Material used for the Furniture                                                  36
4.1     Tools and equipment                                                                37
4.2     Finishing                                                                                  40

5.0     Conclusion                                                                                43
5.1     Recommendation                                                                      44

A tile is a manufactured pieces of hard wearing materials such as ceramic, stone, metal used as a finishing floor and walls or other object such as table top used as ornamentals that add beauty to the surface applied either in buildings, offices and so on. Another category is the ceiling tile, made from light weight materials such as wood and mineral wool.
Tiles are used to form wall and floor coverings and can range from single square tiles to complete mosaic. Tiles are most often from ceramics, with a raft glazed finished, and also same other materials which are available such as glass, marble, granites, slates and reformed ceramic slurry which is cost in a mould and fired.
In the past 20years, the technology surrounding porcelain and glass tiles had become more efficient, allowing for mass production. Similarly the invention automated tile line that used diamond, to cut and finished stone slabs into tiles has made stone tile more available. This is in term as allowed these tiles to move from beings riche items into broader markets.
The ceramic tile demand index has shown a growth of 55% annually for the year 2000-2005 periods. The OSAN world demand for finished granite index has shown a growth of 14% annually for the year 2000-2005 periods. Hence, OS market for ceramic is about 3billion.

The main aim of the project is to remodelling the conference room using tiles as the floor finishing and with the following objectives.

  • To improve the floor surface finishing by laying tile on the floor.
  • To carry out investigation on various type of tiles which are available for used.
  • To provide the bill of quantities floor tiles construction with estimation of each materials used.
  • To know the various methods involved in laying floor tiles.
  • Also to know various materials, equipment and tools used in floor tiles construction.

This project entails the production of bill of quantities and construction of offices floor tiles and the processes of construction of floor tiles finishing.

  • To allow for routine maintaining of a floor surface
  • To improve the floor surface damp proofness

1.3                                 PROJECT ORGANISATION

The article is divided into five sections including this introduction. Section 2 is on the literature review and method of data collection are in Section 3. Results of findings are discussed in Section 4. The way forward is and conclusion in Section 5.

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "remodelling of conference room floor finishes, window and furnitures" is also available. Order full work to download. Chapter two of "remodelling of conference room floor finishes, window and furnitures" consists of the literature review. In this chapter all the related work on "remodelling of conference room floor finishes, window and furnitures" was reviewed.

CHAPTER THREE: The complete chapter three of "remodelling of conference room floor finishes, window and furnitures" is available. Order full work to download. Chapter three of "remodelling of conference room floor finishes, window and furnitures" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "remodelling of conference room floor finishes, window and furnitures" is available. Order full work to download. Chapter four of "remodelling of conference room floor finishes, window and furnitures" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "remodelling of conference room floor finishes, window and furnitures" is available. Order full work to download. Chapter five of "remodelling of conference room floor finishes, window and furnitures" consist of conclusion, recommendation and references.



To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address

Watsapp No whatsapp.html :+2348146561114


Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html

mail Address


tweeter instagram.html pinterestusfacebook logo

Order Full Material(s)
Download Full Material(s)
Bank Accounts

Contact us

Hire a writer

Order/learn construction

View other related topics

Vrequently asked questions(FAQ)
View more related topics and download more material
Format = microsoft word

Chapters = 1-5 chapters

Price: N3,000.
»Accountancy (AC) project
» Agric engineering project topics
» Business admin and management project
» Banking and finance project
» Civil engineering project
» Co-operative economics and management project
» Computer science project
» Community Health Project
» Electrical/electronic/telecom/ power project
» Estate management project
» Education
» Human Kinetics & Health Education Project
» Industrial safety and environmental (ISET) project
» Mass communication project
» Mechanical engineering (ME) project
» Medical And Health Science Project
» Office technology and management (O.T.M) project
» Public administration (PA) project
» Public Health Education Project Topics
» Paramedic Project Topics
» Industrial Physics/Physics Electronics Project
» Science laboratory technology (microbiology option) project
» Agricultural science and engineering seminar
» Building engineering seminar topics/materials
» Civil engineering seminar topics
» Computer science seminar topics
» Environmental seminar topics
» Electrical/electronic/telecom/ power seminar
» Mechanical engineering seminar
» Physics / industrial physics/physics electronics seminar topics/materials