+234 8146561114 (MTN) or
+2347015391124 (AIRTEL)

THE DESIGN AND FABRICATION OF A MANUAL POPCORN FRYING MACHINE

USER'S INSTRUCTIONS: The project work you are about to view is on "the design and fabrication of a manual popcorn frying machine" Please, sit back and study the below research material carefully. This project topic "the design and fabrication of a manual popcorn frying machine" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "the design and fabrication of a manual popcorn frying machine" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "the design and fabrication of a manual popcorn frying machine" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

THE DESIGN AND FABRICATION OF A MANUAL POPCORN FRYING MACHINE

BY

---
EE/H2013/01430
DEPARTMENT OF ---
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "the design and fabrication of a manual popcorn frying machine" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.

By
Dr. ---                                           Dr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
Dr. ---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work “the design and fabrication of a manual popcorn frying machine” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “the design and fabrication of a manual popcorn frying machine” visible for everyone, then the complete material on “the design and fabrication of a manual popcorn frying machine” is to be ordered for. Happy viewing!!!


ABSTRACT

The manual popcorn machine is a device for preparing especial popcorn for the human consumption. The device in produced to help the masses to be self valiance in this is of down trodden economy.This project work is divided into five chapters, chapter one; the introduction discusses the relevance of the project work, problems it is meant to address its importance, scope and limitation and definition of terms. Chapter two comprises the deign and construction, component and fabrication. Chapter three brings to the assembly, principles of operation and control of the machine. Chapter four highlights about the various safety rules project cost evaluation and investment opportunity. Chapter five discussed on insertion and testing recommendation and conclusion together with references and bibliography.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

    1. PROBLEM STATEMENT
    2. OBJECTIVE OF THE PROJECT
    3. SCOPE AND LIMITATION
    4. IMPORTANCE OF THE PROJECT
    5. DEFINITION OF TERMS
    6. PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

    1. OVERVIEW OF THE PROJECT
    2. HISTORICAL BACKGROUND OF POPCORN
    3. POPCRN RAW MATERIALS
    4. POPPING METHODS
    5. HEAT TRANSFER (PRINCIPLE OF HEAT TRANSFER)

CHAPTER THREE

    1. MATERIALS AND METHODS
    2. MOST OF THE EQUIPMENT USED
    3. THE TOOLS USED
    4. CONSTRUCTION METHODS
    5. PRINCIPLE OF OPERATION
    6. DESIGN PICTURE
    7. USAGE AND MAINTENANCE OF MACHINE A USAGE

CHAPTER FOUR

    1. SAFETY PRECAUTION
    2. PROJECT COST EVALUATION
    3. INSPECTION AND TESTING

CHAPTER FIVE

    1. CONCLUSION
    2. RECOMMENDATION
    3. REFERENCES

 

CHAPTER ONE

  1. INTRODUCTION

Popcorn is from a special type of maize unlike other types of corn which pops when heated. The popcorn preparation has long been in practice in Nigeria. It usually required a heating source (stove, fire wood), a frying pan with spoon as the stirrer. It was first discovered and used by the early Americans. Popcorn was introduced to the Western world by Christopher Columbus in the 15th century. The kind of popcorn most people pop in their microwave is the Zea mays. Zea mays everta has a certain amount of moisture content, a strong pericarp that does not allow moisture to escape very fast as other corn when heated. Consequently, a popcorn machine, which is generically used for the purpose of making popcorn for human consumption is essential. Most popcorn machines use gas, some use electricity, while some use the solar as sources of energy. The merits and demerits of these sources are observable in the production rate of the various machines, which in turn depends on the intensity of heat as well as the power source. The objective of the project, therefore, is to design and produce a manual popcorn machine that will enhance popcorn production, using local raw materials.

1.1                                                                  BACKGROUND OF THE STUDY
Nigeria’s economy has suffered a terrible setback over the year the common man finds it difficult to make for his livelihood, some people take pop-corn as one of their favorite food especially bachelors spinsters who can take pop-corn as super, breakfast and even lunch.
The University and Polytechnics graduate no longer find good employment thereby embarks on self-employment by constructing popcorn machine to meet their needs. 
This unemployment constitutes the economic depression of our nations. The popcorn-making machine in constructed with locally made materials at a reduced cost. The design, construction and fabrication of the machine i.e. not in any known text at the moment, the project group therefore faced design, construction and fabrication problem.

    1.                                                                 PROBLEM STATEMENT

In most of the country such as Nigeria where electricity bill is of higher rate, consumers of electricity looks for means of reducing cost of bill by avoiding the use of some appliances on the electricity, one of the means is by using manually operated popcorn machines. However, this machine is designed and produced with the sole aim of solving the above problems thereby improving efficiency during operation.

    1.                                                             OBJECTIVE OF THE DESIGN
  1. To eliminate the use of electrical popcorn machine.
  2. To build a simple pop corn maker
  3. To achieve mass production.
  4. To produce popcorn at a reduced cost.

1.4                                                                  SCOPE AND LIMITATION
This project covers design, construction fabrication and operation of the manual operated popcorn producing machine. A gas cylinder or kerosene stove can be used as the source of heat supply.

1.5                                                      IMPORTANCE OF THE PROJECT
The project will serve as a means of employment to mechanical engineering graduates when properly carried out. Some government can longer guarantee her citizens already made employment. The present economic situation in this country calls for self-reliance. The young technological engineer can embark on the production of the manual operated popcorn-producing machine on low scale and when buoyant enough can embark on large-scale production. This project serves as a medium of enriching our knowledge of designs and constructions techniques, since it embraces practical and research operation. Thirdly, it will provide employment for the fulltime unemployment house covers. Young men and women who have attended the age of gainful employment from the government. Thus included graduates, young school leavers etc. This will provide means of revenue and livelihood, thereby helping to correct societal ills that is prevail our society.
Finally, this project is also relevant to the technology advancement of the nation. It could be exported to the neighbouring countries thereby serving as a source of foreign exchange earnings for the nation.

1.6                                                                    DEFINITION OF TERMS

  1. Stirrer: This is the rod attached to the gear of the machine that is rotating and turning the corn in the pot.
  2. Design Drawing: It is a drawing or outline from which something can be made.

CHAPTER ONE: The complete chapter one of “the design and fabrication of a manual popcorn frying machine” is available. Order full work to download. Chapter one of “the design and fabrication of a manual popcorn frying machine”consists of the literature review. In this chapter all the related work on“the design and fabrication of a manual popcorn frying machine” was reviewed.

CHAPTER TWO: The complete chapter two of “the design and fabrication of a manual popcorn frying machine” is available. Order full work to download. Chapter two of “the design and fabrication of a manual popcorn frying machine” consists of the literature review. In this chapter all the related work on “the design and fabrication of a manual popcorn frying machine” was reviewed.

CHAPTER THREE: The complete chapter three of “the design and fabrication of a manual popcorn frying machine” is available. Order full work to download. Chapter three of “the design and fabrication of a manual popcorn frying machine” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of “the design and fabrication of a manual popcorn frying machine” is available. Order full work to download. Chapter four of “the design and fabrication of a manual popcorn frying machine” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of “the design and fabrication of a manual popcorn frying machine” is available. Order full work to download. Chapter five of “the design and fabrication of a manual popcorn frying machine” consist of conclusion, recommendation and references.



To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.


For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No
:+2348146561114

E
mail Address :engr4project@gmail.com


CLICK HERE FOR MORE RELATED TOPICS/MATERIAL

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.