THE DESIGN AND CONSTRUCTION A 6V AND 12V AUTOMATIC VOLTAGE STABILIZER
ABSTRACT
This project is titled the design and construction of a 6v and 12v Automatic Voltage Stabilizer. It is designed to meet up with the DC voltage safety, stability and accuracy demand in industries and in homes. Voltage stabilizers are useful in devices such as computer Power supplies. Voltage stabilizers are used to stabilize the input voltage to protect the rest of circuitry from unwanted electrical spikes, nowadays some devices have inbuilt stabilizer circuit. Due to the fluctuation of supply voltage devices may malfunction or damage permanently; to avoid these problems an ac voltage stabilizer is used
DC Automatic voltagestabilizer is designed to automatically maintain a constant DC voltage level. Dc Voltage Stabilizer may be a simple "feed-forward" design or may include negative feedback control loops. It makes use an electromechanical mechanism, and other electronic components. Depending on the design, it may be used to regulate one or more DC voltages.
This project is designed to stabilize an output voltage of dc device to 6 and 12v automatically. The automatic feature can be achieved by the electronics devices used such voltage comparator IC, electro-magnetic device (relay), auto- transformer and other electronics devices.
CHAPTER ONE
INTRODUCTION
There are many fundamental different types of stabilizers in use some of which are electron mechanically tap changer, solid state tap changer etc. voltage, stabilizer came into being not by normal design and plain, but as a means of solving electrical “Crisis” situation. This crisis situation does rarely occur in developed countries of the world such as Britain, American, Germany.
Their system of generation, transmission and distribution of electricity is such that a devoid of variation of fluctuation in the supplied voltage. Now, by the definition given by K.G Jackson and R. Feinberg, a voltage stabilizer is a piece device incorporated in a circuit to maintain a constant output voltage from a poorly generated power supply. A voltage stabilizer like any other piece of equipment is a combination of many electrical and like any other piece of equipment is a combination of many electrical and electronic and circuit with the aim of getting the assemble to perform a specified desired task or function.
Thereja B.L. defined a transformer as static piece of apparatus by means of which electric power is one circuit is transformed into power 7 some frequency in another circuit. The power can either be raised or covered. If it is referred to as a step-up transformer but if it is lowered, it is referred to as a step transformer being the one applicable to this project work.
This is bike an integrated circuit hat is made of microscopically small transistors, diodes, resistors and components connected together. It is used as complete and is amplifier, voltage amplifier is a comparators connected together. It is used as a complete audio amplifier, voltage amplifier is or comparators to mention just a few of its application. An operational amplifier (op. Amp) is widely sued type of IC, which is designed to manipulate very differences in voltage. The op-amp does the same work has comparator simply because it compares two voltages and provide and output signal when one is bigger.
1.2 AIM AND OBJECTIVE OF THE PROJECT
Most electrical appliance this day highly sophisticated to the entreated that cases of intermitted or regular power outages, under voltages or over voltages are not tolerate in them. The initial outlay and the cost or repair (in case of damage) are so economical that is means of maintain steady or regulated a.c power supply to these expensive appliance/equipment must sought for.
The cost of purchasing some already made imported voltage stabilizer is enormous. Not readily available in our local markets while importing them requires high foreign exchange, the sown tunes is also much before, there is need to embark on this project work the design and construction automatic voltage stabilizer any form of voltage fluctuating (under voltage or over voltage) from the NEPA mains supply to domestic and industrial consumer premise. It is also one of the objectives of this project work that cost comparison between the imported or factory assembled voltage stabilizer e.g SORTEX OR BINATONE products and a locally fabricated voltage stabilizer are embarked on and that work be done on this project in order to finally produce a device that would perform optimally and also relatively cheaper.
1.3 SIGNIFICANCE OF THE PROJECT
This circuit regulates a DC power output. It has a very wide application range. It can be used to control the speed of a motor, a pump, a toy train, the brightness of a LED or lamp, etc. Practically, it can be used in any application that uses a regulated DC power with pulse width modulation (PWM).
****************************************************************
This material is a complete and well researched project material strictly for academic purposes, which have been approved by different Lecturers from different higher institutions. We make abstract and chapter one visible for everyone.
All the Project Topics on this site have complete 5(five) Chapters . Each Project Material include: Abstract + Introduction + etc + Literature Review + etc + Conclusion + Recommendation + References/Bibliography.
To download the complete material click HERE
TO ALL OUR DISTINGUISED CUSTOMERS AND PARTNERS, WE ARE SAYING "THANK YOU" FOR CONSTANT AND REMARKABLE PATR-ONAGE. BUT TO OUR INTENDING CUSTOMER, WE ARE SAYING WELCOME TO OUR "PROJECT-MADE-EASY" HOME! HOWEVER, IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR HOME. |