DESIGN AND CONSTRUCTION OF A 2HP STAR-DELTA MOTOR STARTER WITH O/L, PHASE FAILURE AND OVERVOLTAGE PROTECTION
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection". Please, sit back and study the below research material carefully. This project topic "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" visible for everyone, then the complete material on "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" is to be ordered for. Happy viewing!!!
This paper describes a student project that studies the design of a 2hp star delta Starter which incorporates phase failure and sequence protection for three phase Alternating Current (AC) Induction Motor. Starting a large motor that utilizes an AC Converter will eliminate the need to draw a large amount of current during the transient period, thereby insuring that starting a large motor will not disturb adjacent power lines. On the demand side, the protection of consumer equipment and appliances from damage and total destruction due to phase failures is an issue of paramount importance mainly in parts of the world with unsteady supply of electricity. In this work we took a detailed look into what a phase failure is and the possible causes. Then we finally explain the details of a method we have developed that detects cases of phase failure and takes the appropriate measure that will save the consumer loads from damages.
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
ABBREVIATION
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
- PROBLEM STATEMENT
- AIM AND OBJECTIVE OF THE STUDY
- ADVANTAGES OF SOFT STARTER
- DISADVANTAGES OF SOFT MOTOR STARTER
- APPLICATIONS OF SOFT STARTER
- LIMITATION OF THE STUDY
- SCOPE OF THE STUDY
CHAPTER TWO
LITERATURE REVIEW
- REVIEW OF THE STUDY
- DESCRIPTION OF AN AC INDUCTION MOTOR
- REVIEW OF OPERATING PRINCIPLES OF AN AC INDUCTION MOTOR
- HISTORICAL BACKGROUND OF AN AC INDUCTION MOTOR
- REVIEW OF RELATED STUDIES
- REVIEW OF DIFFERENT TYPES AC MOTOR CONTROL
CHAPTER THREE
3.0 METHODOLOGY
3.1 SYSTEM BLOCK DIAGRAM
3.2 SYSTEM CIRCUIT DIAGRAM
3.3 SOFT STARTER CIRCUIT DESCRIPTION
3.4 PHASE FAILURE AND SEQUENCE PROTECTION CIRCUIT
3.5 PHASE FAILURE DETECTOR AND SEQUENCE PROTECTION CIRCUIT DIAGRAM
3.6 PHASE FAILURE DETECTOR AND SEQUENCE PROTECTION MODE OF OPERATION
CHAPTER FOUR
4.1 INSTALLATION OF THE COMPLETED DESIGN
4.2 CONSTRUCTION PROCEDURE AND TESTING
4.3 CASING AND PACKAGING
4.4 ASSEMBLING OF SECTIONS
4.5 TESTING OF SYSTEM OPERATION
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Our industries use various kinds of machines. The induction machine is one of the most used three phase AC machine which is almost 70% of the motors used in industries. Their robust construction and high efficiency makes it the best choice for every industrial sector. But they do require protection devices and equipment used for their safe operation so it can operate safely and prevents any potential damage to the motor and also increase their life span. The most essential equipment used for three phase induction motor is a motor starter.
This starter uses a soft starting method which is a type of motor starter that uses the voltage reduction technique to reduce the voltage during the starting of the motor.
The soft starter offers a gradual increase in the voltage during the motor startup. This will allow the motor to slowly accelerate & gain speed in a smooth fashion. It prevents any mechanical tear & jerking due to sudden supplying of full voltage (Lowenstein et al., 2012).
The torque of an induction motor is directly proportional to the square of current. & the current depends on the supply voltage. So the supply voltage can be used to control the starting torque. In a normal motor starter, applying full voltage to the motor generates maximum starting torque which possess mechanical hazard to the motor (Lowenstein et al., 2012).
Therefore we can say that a soft starter is a device that reduces the starting torque & gradually increase it in a safely manner until it reaches it rated speed. One the motor attains its rated speed, the soft starter resumes the full voltage supply through it.
During motor stopping, the supply voltage is gradually reduced to smoothly decelerate the motor. Once the speed reaches zero, it breaks the input voltage supply to the motor.
The main component used for the regulation of voltage in a soft starter is a semiconductor switch such as a Thyristor (SCR). Adjusting the firing angel of the thyristor regulates the voltage supplying through it. Other components such as OLR (overload relay) used for overcurrent protection is also used.
1.2 PROBLEM STATEMENT
Connecting the motor to power supply draws a huge amount of current in the stator winding due to this low impedance called inrush current. The alternating current in the stator generates a rotational magnetic field (RMF) that induces current in the rotor windings.
The rotor current generates its own magnetic field that try to cancel its cause & starts rotating in the direction of RMF. Thus the rotor experience torque and as its speed starts increasing the slip of the motor decreases (i.e. the rotor RMF speed approaches near stator RMF speed). Since the slip is reduced, the impedance of the rotor increases and the motor start drawing normal rated current.
The High inrush current is 5-8 time larger than the full load rated current of the motor. Induction motor cannot tolerate such amount of current as it can quickly damage or burn the windings, reducing the performance and lifespan of the motor. Such high currents can also cause huge dip in the line voltage which is dangerous for other appliances connected to the same line.
In order to prevent such high inrush current, we use motor starters that reduces the initial current for a short duration. Once the motor gains certain speed, the normal power supply is resumed. It also offers protections against low voltage and overcurrent.
1.3 AIM AND OBJECTIVES OF THE STUDY
The main aim of this work is to build a 2hp star delta Starter with phase failure and sequence protection.
The objectives of this work are:
- To help you reduce mechanical wear and tear on startup.
- To reduce energy costs.
- To minimize loss of production hours from equipment breakdown.
Advantages of Soft Starter are as follows (Duncan et al., 2011):
Smooth Startup: Unlike conventional motor starter, it provides very gradual increase of voltage thus speed that results in a very smooth startup. There is no mechanical stress whatsoever or jerks that can damage the motor.
Acceleration & Deceleration Control: It offers a fully adjustable acceleration and deceleration of the motor. Varying the firing angle slowly or quickly can control the acceleration during startup and deceleration during stopping of motor. This is used in application where startup acceleration needs to be adjusted.
No Power Surges: Since the conventional motor starter allows full voltage across the motor, a huge inrush current start flowing into the motor that cause a power surge in the circuit. the soft starter limits such current thus preventing the power surges.
Multiple Startups: Some applications require the motor to start and stop multiple times in small period of time. such motor if used with a conventional starter will experience overheating due to high starting current. However, soft starters drastically increases the number of startups for a motor in a specific duration.
Reduction of Overheating: The motor overheating is a very serious problem. It occurs due to the high winding current during its startup. The soft starter allows a very small amount of starting current which prevents the overheating of motor.
Increased Life Span: The soft starter as compared to a conventional starter improves the life time of the motor. it is due to the smooth operation & absence of electrical and mechanical stress on the motor.
Less Maintenance: Due to its smooth operation, the induction motor is less likely to have any mechanical faults, which is why it require less maintenance as opposed to conventional motor starter.
Efficiency: A conventional motor starter supply full voltage (very high inrush current) to the motor that consumes too much energy. A soft starter significantly reduces it and allows a gradual increase in energy consumption. Also the power switches are controlled using very low voltage level. It improves the overall efficiency of the motor.
Compact & Small Size: The soft starter has a very compact design that takes up very small space. Unlike other motor starters, it has very small size.
Low Cost: compared to other starters such as VFD, this sure does cost cheaper.
No Speed regulation: The soft starter only allows the control of input voltage supply i.e. from 0 volts to line voltage with a fixed line frequency. Since the frequency is constant the motor speed is constant and only regulates by the load connected with it. The speed of induction motor is regulated by varying the supply frequency below or above the line frequency according to the need. Such feature is only available in VFD (variable frequency drive).
Heat dissipation: The semiconductor switches inside the soft starter dissipates some energy in the form of heat. Therefore, it also requires heat sinks for cooling the power switches.
Reduced starting Torque: Since it reduces the input voltage that corresponds to the input current which is directly proportional to the starting torque of the induction motor, it significantly reduces the starting torque.
The soft starter is used in industries and is more appropriate to be used for motors that run on a constant speed.
Fans: The huge fans used in industries runs at a constant speed. However, they do require the startup protection. A soft starter is a best option for such fans.
Conveyer belts: The conveyer belts in industries are used for moving objects and it needs extra care. The sudden jerks during starting or stopping using conventional starter may misalign the belts, damages the belt due to mechanical stress & damage the objects placed on it. It requires a smooth starting & stopping offered by a soft starter
Motors using belt & pulleys: The motor that drives load through belts and pulleys cannot tolerate the sudden jerks. It wears the belt that couples it to the load. A soft starter offers a smooth starting for such motor applications.
Water or liquid Pump: Any type of pump connected with a motor requires a smooth starting & stopping due to the sudden pressure building inside the pipes. A conventional starter may generate enough pressure at startup to break the line. A soft starter offer gradual increase in the pressure to such liquid pumps. However, there is no speed control of the pump during normal operation. A VFD is a better choice for variable pump speed.
1.7 LIMITATION OF THE STUDY
Electric motor starters are usually used for heavy power rated motors. Small motors below 1Hp does not require motor starter due to their high impedance. However, they do need overcurrent protection that is available in DOL starter.
1.8 SCOPE OF THE STUDY
The scope of this work covers building a motor starter to safely start & stop an electric motor. The induction motors draws a huge amount of current at starting. It is due to the low impedance of the windings of the motor at standstill.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of"design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection"is also available. Order full work to download. Chapter two of "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" consists of the literature review. In this chapter all the related work on "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" is available. Order full work to download. Chapter three of "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" is available. Order full work to download. Chapter four of "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection"consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" is available. Order full work to download. Chapter five of "design and construction of a 2hp star-delta motor starter with o/l, phase failure and overvoltage protection" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
