phonelogo+234 8146561114 or +2347015391124

BANDWIDTH REQUIREMENT FOR COMMUNICATION AT UNI-AGRIC

USER'S INSTRUCTIONS: The project work you are about to view is on "bandwidth requirement for communication at uni-agric" . Please, sit back and study the below research material carefully. This project topic "bandwidth requirement for communication at uni-agric" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "bandwidth requirement for communication at uni-agric" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "bandwidth requirement for communication at uni-agric" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---



APPROVAL PAGE

This is to certify that the research work, "bandwidth requirement for communication at uni-agric" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "bandwidth requirement for communication at uni-agric" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "bandwidth requirement for communication at uni-agric" visible for everyone, then the complete material on "bandwidth requirement for communication at uni-agric" is to be ordered for. Happy viewing!!!


ABSTRACT

In communication, Bandwidth is used to measure communication. It is defined as the width of the range of the frequencies that an electronic signal uses. Bandwidth is expressed in terms of the difference between the signal having highest-frequency and the signal having the lowest-frequency.
Bandwidth is a key concept in many telephony applications. In radio communications, for example, bandwidth is the frequency range occupied by a modulated carrier wave, whereas in optics it is the width of an individual spectral line or the entire spectral range.
In many signal processing contexts, bandwidth is a valuable and limited resource. For example, an FM radio receiver's tuner spans a limited range of frequencies. A government agency may apportion the regionally available bandwidth to broadcast license holders so that their signals do not mutually interfere. Each transmitter owns a slice of bandwidth, the same thing occurs when communication occur in any school such as using fm transmitter to pass information to students in the same environment.

CHAPTER ONE
1.1                                                        INTRODUCTION
A thought kept in the brain is of no use unless and until it is shared with other individuals and rest of the world. The idea, no matter however brilliant it is, must come out for its successful implementation for it to benefit one and all. It is the prime responsibility of the individual to share his thoughts and ideas with others.
The communication system enables the successful transmission of idea or any other important information among individuals. The person from whom the thought originates carefully encodes his ideas into a sensible content which is now ready to be shared with everyone. He is commonly referred to as the sender and the other party who receives the information from him is called the receiver or the recipient. The free flow of information between the sender and the receiver takes place because of the communication system.
However, for a communication to be complete it must operate according to a particular bandwidth. In communication, Bandwidth is used to measure electronic communication. It is defined as the width of the range of the frequencies that an electronic signal uses. Bandwidth is expressed in terms of the difference between the signal having highest-frequency and the signal having the lowest-frequency. In computer networks, bandwidth is often used as a term for the data transfer rate. More easily, the amount of data that is carried or passed from one point to another in a network, in a given time period.

1.2                                               OBJECTIVE OF THE STUDY
The aim of this work is highlight a particular bandwidth that can be used in communication system used in the school environment which is used to communicate with students in a particular environment.

1.3                                           SIGNIFICANCE OF THE STUDY
Bandwidth is often applied to the electromagnetic spectrum (e.g., radio waves, light waves and X-rays). Such waves are vibrations (oscillations) of electric and magnetic fields. To use a radio example, the lowest United States AM radio channel covers the band of frequencies from 535,000 Hz to 545,000 Hz. It therefore has a bandwidth of 10,000 Hz (545,000 - 535,000). All United States AM radio broadcasting stations have this bandwidth (though the location of each band is distinct). The lowest United States FM radio channel (on the other hand) covers the band from 88,000,000 Hz (88 MHz) to 88,200,000 Hz (88.2 MHz). It therefore has a bandwidth of 200,000 Hz. (Notice that the width of an FM band is 20 times the width of an AM band.)
The term "bandwidth" has been misused in the field of digital data communication. It is often incorrectly used to mean "data carrying capacity". However, there is no such thing as "digital bandwidth". The proper term for the data carrying capacity of a communication channel is channel capacity.
It is true that, in general, the channel capacity of a system increases with the bandwidth used for communication. However, many other effects are also important. Therefore, in many (if not most) real systems, the channel capacity is not easily related to the channel bandwidth.

1.4                       DIFFERENT TYPES OF COMMUNICATION SYSTEMS

Various types of communication are as below:

Optical Communication System

The word “Optical” stands for light. As the name itself suggests, optical communication system depends on light as the medium for communication. In an optical communication system the transmitter converts the information into an optical signal (signal in the form of light) and finally the signal then reaches the recipient. The recipient then decodes the signal and responds accordingly. In optical communication system, light helps in the transmission of information. The safe landing of helicopters and aeroplanes work on the above principle. The pilots receive light signals from the base and decide their next movements. On the roads, red light communicates the individual to immediately stop while the individual moves on seeing the green light.
In this mode of communication light travels through the optical fibre.

Radio Communication System

In the radio communication system the information flows with the help of a radio. Radio communication system works with the aid of a transmitter and a receiver both equipped with an antenna.
The transmitter with the help of an antenna produces signals which are carried through radio carrier wave. The receiver also with the help of an antenna receives the signal. Some information is unwanted and must be discarded and hence the electronic filters help in the separation of radio signals from other unwanted signals which are further amplified to an optimum level Finally the signals are decoded in an information which can be easily understood by the individuals for them to respond accordingly.

Duplex communications system

In Duplex communications system two equipments can communicate with each other in both the directions simultaneously and hence the name Duplex. When you interact with your friend over the telephone, both of you can listen to each other at the same time. The sender sends the signals to the receiver who receives it then and there and also give his valuable feedback to the speaker for him to respond. Hence the communication actually takes place between the speaker and the receiver simultaneously.
In the Duplex communication system, two devices can communicate with each other at the same time.
A type of communication system involves the sender and the receiver where the sender is in charge of sending signals and the recipients only listen to it and respond accordingly. Such communication is also called Simplex communication system.

Half Duplex Communication System

In half Duplex communication system, both the two parties can’t communicate simultaneously. The sender has to stop sending the signals to the recipient and then only the recipient can respond.
A walkie talkie works on the half duplex communication system. The military personnel while interacting has to say “Over” for the other person to respond. He needs to speak the security code correctly for the other person to speak. The other party will never communicate unless and until the code is correct and complete.

Tactical Communication System

Another mode of communication is the tactical mode of communication. In this mode of communication, communication varies according to the changes in the environmental conditions and other situations.

All the above modes of communication work for a common objective ie to transfer the information from one party to the other party. The various models of communication system help us to understand the route of flow of information from the sender to the recipients through some medium.

 


CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "bandwidth requirement for communication at uni-agric" is also available. Order full work to download. Chapter two of "bandwidth requirement for communication at uni-agric" consists of the literature review. In this chapter all the related work on "bandwidth requirement for communication at uni-agric" was reviewed.

CHAPTER THREE: The complete chapter three of "bandwidth requirement for communication at uni-agric" is available. Order full work to download. Chapter three of "bandwidth requirement for communication at uni-agric" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "bandwidth requirement for communication at uni-agric" is available. Order full work to download. Chapter four of "bandwidth requirement for communication at uni-agric" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "bandwidth requirement for communication at uni-agric" is available. Order full work to download. Chapter five of "bandwidth requirement for communication at uni-agric" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logomyyoutubelogo.html