USER'S INSTRUCTIONS: The project work you are about to view is on "construction of 3kva, 12v ferrite base inverter". Please, sit back and study the below research material carefully. This project topic ( construction of 3kva, 12v ferrite base inverter) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "construction of 3kva, 12v ferrite base inverter" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "construction of 3kva, 12v ferrite base inverter" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
CONSTRUCTION OF 3KVA, 12V FERRITE BASE INVERTER
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, " construction of 3kva, 12v ferrite base inverter" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "
construction of 3kva, 12v ferrite base inverter" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "
construction of 3kva, 12v ferrite base inverter" visible for everyone, then the complete material on "
construction of 3kva, 12v ferrite base inverter" is to be ordered for. Happy viewing!!!
This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, PHCN. In order words the device / item serves as a substitute for PHCN which almost monopolises the power supply to people.
It is designed in such a way that it will take up 12v DC from battery and inverts it to an output of 220v, 50Hz AC. It makes no noise during operation and no hazardous carbon monoxide is generated in the surrounding.
This is a feature that makes it safe to use any where when compared to generator. Also, the circuit is capable of charging the battery (i.e 12v source) when the power from the supply authority is on. This greatly reduces the cost of operation of the system.
This work is aimed at building a 12v ferrite based inverter of power rating of 3kva that can be used to power appliances both in homes and industries.
Title page i
Certification ii
Dedication iii
Acknowledgement iv
Table of Contents vii
Abstract x
CHAPTER ONE
1.0 Introduction
1.1 Background of the project
1.2 Problem statement
1.3 Aim and Objectives of the project
1.4 Significance of the Project
1.5 Limitation of the project
1.6 Methodology
1.7 Block diagram of the project
1.8 Report Layout
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 Historical Background of the project
2.2 Theory Behind the project topic
2.3 Existing types of the project
2.4 The Innovations in this project
2.5 Summary of the Review
CHAPTER THREE
MATERIALS METHODS
3.1 Project Materials Documentation
3.2 Significance of Materials Documentation
3.3 Common Mistakes in Documentation of materials
3.4 Documentation of methods
CHAPTER FOUR
DESIGN ANALYSIS AND CONSTRUCTION
4.1 Engineering Design Procedure
4.2 Importance of Documenting Design Procedure
4.3 Documentation of Construction Process
4.4 Bill of Engineering Measurement and Evaluation (BEME)
4.5 A Sample Design and Construction Documentation
CHAPTER FIVE
TEST RESULTS AND DISCUSSION
5.1 Project Testing
5.2 Result Presentation and Discussion
5.3 A Sample Test Results and Discussion
CHAPTER SIX
CONCLUSION AND RECOMMENTATION
6.1 Conclusion
6.2 Recommendation
6.3 A sample Conclusion and Recommendation
REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Electricity supply is one the economic infrastructural facilities that are indispensable to a nation’s economic development. The efficiency of the supply of electricity will not only influence returns on investment on existing enterprises, it also plays a major role in the creation of an economic environment which influences decisions on potential investment [Barnes, 2012].
The electricity which is the main source of power for our domestic consumption, industrial development, learning centres and medical centre should really be rehabilitated into enhancement of productivity [Barnes, 2012].
However power failure has resulted in people buying generators for their own daily activity. Other businesses are also not functioning due to absence of constant power supply. These are the reasons that necessitate the designing and construction of inverter and other standby system that can deliver maximum output power to the load. As society grows from simple to complex, mankind began to spread all over the earth and so it becomes necessary to enjoy power using inverter [Barnes, 2012].
Statistics have shown that the number of business that have been closed simply because of power problem and cannot be over emphasized, so mankind need inverter seriously in other to restore technology development, businesses, communications, learning centre and medical centres. However, the background of the study lies within the reason why and the construction of inverter should be forwarded and factor that enhance inverter marketability [Du, Ruoyang, 2017].
Inverters are classified either as Iron core inverters or ferrite core (chopper) inverter. This work is focusing of the ferrite based inverter of 12v input and 220vac output.
Ferrite core inverter is a type of power inverter used for power backup, it uses ferrite core transformer to step-up the low voltage AC to high voltage AC at high frequencies derived from a DC source (battery).
Ferrite core transformer inverters are lite weight, high efficiency, low cost and have good portability than traditional bulky iron core transformer based inverter.
Ferrite core based inverter is often marketed as transformerless inverter because of their lite weight it feels like it doesn’t sport a transformer.
The ferrite core transformer can handle a lot of power in a much smaller dimension than iron core transformer because ferrite material has low energy loss at high frequencies.
Ferrite cores has high magnetic permeability, meaning it can hold lot of magnetic field around it, so less magnetic flux loss and because ferrite materials are bad conductor of electricity, at high frequencies very low eddy current is induced on the core.
1.2 PROBLEM STATEMENT
Iron core inverter was first invented which was later discovered that it has some limitations such as low efficiency, big in size, high in weight, high cost and it greatly produce heat when on load. It was because of these problems discovered in iron core inverter that led to the discovery of ferrite based inverter which overcomes these challenges. Ferrite inverter has high efficiency, small in size, low in weight, low cost and heat generation is also less.
1.3 AIM AND OBJECTIVES OF THE STUDY
The main aim of this work is to build a high frequency ferrite core transformer based inverter circuit which can output 3000 watt 220VAC at 50Hz with good efficiency. The objectives are:
- To build this devices with available components
- To learn how a ferrite core inverter functions stage by stage extensively.
- To achieve good efficiency in the inverter.
1.4 PURPOSE OF THE STUDY
The main purpose of this work is to achieve high portability and high efficiency in an inverter.
1.5 LIMITATION OF THE STUDY
As we all know that no human effort to achieve a set of goals goes without difficulties, certain constraints were encountered in the course of carrying out this project and they are as follows:-
- Difficulty in information collection: I found it too difficult in laying hands of useful information regarding this work and this course me to visit different libraries and internet for solution.
- Difficulty in parts gathering: I found it too difficult when gathering electronics parts used for the prototype.
1.6 SIGNIFICANCE OF THE STUDY
This research work will throw more light on the best techniques for building inverter for any purpose. This study will also be designed to be of immense benefit to all the builders of inverter.
It will also serve as a guide to whoever that wants to purchase inverter with good efficiency.
Finally, it will also serve as a useful piece of information for both producers and users of inverter.
1.8 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to a power inverter. In this chapter, the background, significance, aim/objective problem statement, purpose, application, limitation and problem of a power inverter were discussed.
Chapter two is on literature review of a power inverter. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of " construction of 3kva, 12v ferrite base inverter" is also available. Order full work to download. Chapter two of " construction of 3kva, 12v ferrite base inverter" consists of the literature review. In this chapter all the related work on " construction of 3kva, 12v ferrite base inverter" was reviewed.
CHAPTER THREE: The complete chapter three of " construction of 3kva, 12v ferrite base inverter" is available. Order full work to download. Chapter three of " construction of 3kva, 12v ferrite base inverter" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of " construction of 3kva, 12v ferrite base inverter" is available. Order full work to download. Chapter four of " construction of 3kva, 12v ferrite base inverter" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of " construction of 3kva, 12v ferrite base inverter" is available. Order full work to download. Chapter five of " construction of 3kva, 12v ferrite base inverter" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
