USER'S INSTRUCTIONS: The project work you are about to view is on "construction of a welding machine 220v/250a" Please, sit back and study the below research material carefully. This project topic "construction of a welding machine 220v/250a" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "construction of a welding machine 220v/250a" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "construction of a welding machine 220v/250a" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
CONSTRUCTION OF A WELDING MACHINE 220V/250A
BY
---
EE/H2013/01430
DEPARTMENT OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "construction of a welding machine 220v/250a" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.
By
Dr. --- Dr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Dr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work “construction of a welding machine 220v/250a” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “construction of a welding machine 220v/250a” visible for everyone, then the complete material on “construction of a welding machine 220v/250a” is to be ordered for. Happy viewing!!!
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGMENT
ABSTRACT
TABLE OF CONTENTS
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM/OBJECTIVE OF THE PROJECT
1.3 SIGNIFICANCE OF THE PROJECT
1.4 SCOPE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 LIMITATION OF THE PROJECT
1.7 TYPES OF ELECTRIC ARC WELDING
1.8 APPLICATION OF THE PROJECT
1.9 PROBLEMS OF THE PROJECT
1.10 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
- HISTORICAL BACKGROUND OF THE PROJECT
- TRANSFORMER DESIGN
- REVIEW OF TYPES OF ARC WELDING ELECTRODE METHODS:
- REVIEW OF WELDING EQUIPMENT
- FACTORS AFFECT WELD QUALITY
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
- BLOCK DIAGRAM
- BASIC PRINCIPLE OF ARC WELDING MACHINE
- THEORY AND DESIGN OF WELDING TRANSFORMERS
- SYSTEM OPERATION
- DESIGN CALCULATION
- COST ANALYSIS
CHAPTER FOUR
4.0 RESULT ANALYSIS
- CONSTRUCTION PROCEDURE
- CASING AND PACKAGING
- ASSEMBLING SECTION
- SYSTEM TESTING
- DESIGN PRECAUTION
CHAPTER FIVE
- CONCLUSION AND RECOMMENDATION
- CONCLUSION
- RECOMMENDATION
- REFERENCE
1.0 INTRODUCTION
An Arc welding machine is a type of welding machine that uses a welding power supply to create an electric arc between an electrode and the base material to melt the metals at the welding point. The arc welding is a fusion welding process in which the welding heat is obtained from an electric arc struck between the work(or base metal) and an electrode. The temperature of the heat produced by the electric arc is of the order of 6000°C to 7000°C [Weman Klas, 2003].
They can use either direct (DC) or alternating (AC) current, and consumable or non-consumable electrodes. The welding region is usually protected by some type of shielding gas, vapor, or slag. Arc welding processes may be manual, semi-automatic, or fully automated. First developed in the late part of the 19th century, arc welding became commercially important in shipbuilding during the Second World War. Today it remains an important process for the fabrication of steel structures and vehicles [Weman Klas, 2003].
Arc welding machine has Main cable that receives energy from the source (220 or 440 Volts AC), the starter or switch, the transformer, the controls of tension (Voltage) and current (Amps-or-Amperage), the two secondary wires: one is to ground the machine to the building + structure + part that you are to weld, the other is to put your electrode and produce the welding
The direction of current used in arc welding also plays an important role in welding. Consumable electrode processes such as shielded metal arc welding and gas metal arc welding generally use direct current, but the electrode can be charged either positively or negatively [Faraday Michael, 1834]. In welding, the positively charged anode will have a greater heat concentration and, as a result, changing the polarity of the electrode has an impact on weld properties. If the electrode is positively charged, it will melt more quickly, increasing weld penetration and welding speed. Alternatively, a negatively charged electrode results in more shallow welds. Non-consumable electrode processes, such as gas tungsten arc welding, can use either type of direct current (DC), as well as alternating current (AC). With direct current however, because the electrode only creates the arc and does not provide filler material, a positively charged electrode causes shallow welds, while a negatively charged electrode makes deeper welds. Alternating current rapidly moves between these two, resulting in medium-penetration welds. One disadvantage of AC, the fact that the arc must be re-ignited after every zero crossing, has been addressed with the invention of special power units that produce a square wave pattern instead of the normal sine wave, eliminating low-voltage time after the zero crossings and minimizing the effects of the problem [Weman Klas, 2003].
- AIM AND OBJECTIVE OF THE PROJECT
The aim of this work is to design and construct an electric arc machine that can be used to weld irons. To design and construct an electric machine that will create an electric arc between an electrode and the base material to melt the metals at the welding point.
The objective of this work is:
- At the end of the work an electric arc welding is been built with a power source of 220 VAC with 32 a.c output taps ranging from 140VAC to 220VAC which are used to step the arc voltage and current to the required level.
- PURPOSE OF THE PROJECT
The purpose of his work is to design an electrical machine that uses a welding power supply to create an electric arc between an electrode and the base material to melt the metals at the welding point. They can use on alternating (AC) current, and consumable or non-consumable electrodes.
1.3 SIGNIFICANCE OF THE STUDY
a. AC Arc Welding Transformers are extensively used today in machine building and general purpose maintenance and fabrication work. Light medium and heavy structural work as a Power Source.
b. The safety advantages of switching to welding machine include reduced health hazards for workers. From limiting exposure to hazardous fumes to decreased risk of arc burn, arc welding machine help to save workers from a once dangerous job.
c. It has high welding efficiency and speed.
d. It provides better welding environment.
e. It gives consistent quality of weld.
f. It forms the strong bond in between the joined metals.
g. It has simple welding equipment.
h. Power source is not so expensive.
i. It is fast and reliable process.
j. Equipments can be used for multiple functions.
k. Welders can use standard domestic current.
1.4 LIMITATION OF THE PROJECT
1) Higher initial setup cost
2) Atmosphere surrounding the welding process has to be stable (hence the shielding gasses), therefore this process is limited to draught free conditions
3) Higher maintenance costs due to extra electronic components
4) The setting of plant variables requires a high skill level
5) Less efficient where high duty cycle requirements are necessary
6) Radiation effects are more severe
7) the rated output current is 250A
1.5 BENEFIT OF THE PROJECT
An arc welding machine uses a process which applies intense heat to metal at a joint, causing the metal to melt and intermix. Arc welding machine has several benefits, including improved weld consistency, decreased cycle times, and enhanced efficiency.
1.6 APPLICATION OF THE PROJECT
Arc welding utilizes an electric arc between an electrode and a metal base using either consumable or non consumable electrodes. This welding machine is commonly found in steel product and automobile manufacturing. Other applications include [Lincoln Electric, 1994]:
Construction: Arc Welding processes are a foundational aspect of all large-construction industries, ensuring strong, sustainable connections within buildings, bridges and other infrastructures.
Mechanical: For more rugged applications that involve thicker metal dimensions, arc welding provides the control and effectiveness necessary to firmly bond heavier pieces together. In the automotive industry, arc welds bond heat shields, exhaust systems and hydraulic lines to the chassis. Metal furniture pieces like office desks, file cabinets and shelving units are often welded. Heating, ventilation and air conditioning units are usually constructed using welding processes.
Equipment: Most, if not all, of today’s industries rely on properly functioning equipment, and welding processes are vital to the success of those machines.
Farm equipment: In agriculture, farm machines that plow, plant, seed and harvest are fundamental to the country’s food supply. Those machines are welded throughout their frames and processes. On the chassis, the cab frame, fenders and brackets are formed by welds. Motor structure and electrical functions are fused, as are the features of specialized tools such as threshers and spreaders. These machineries can be welded using arc welding machine [Weman Klas, 2003]
Lawn and garden: Lawn mowers, trimmers, power saws and other garden equipment have long lives due to the strength of their welded frames. Other metal garden features enhance the enjoyment of outdoor life, such as barbecue grills, enclosures, seating and watering systems [Kalpakjian, Serope; Schmid, Steven R. 2001].
Highway equipment: Maintenance of safe and passable roads also depends on secure welds. Manhole cover plates and the sewer and utility systems that frequently run under roads are also usually constructed with welding processes.
Institutional equipment: Hospitals, medical facilities, schools and homes all rely on well-functioning appliances to keep food warm or cold, run accurate testing operations and clean clothing or dishes. Virtually every appliance in use today was constructed at least in part with a arc welding process.
1.7 TYPES OF ELECTRIC ARC WELDING
Arc welding can be direct current (D.C) or alternating current (A.C) arc welding, but the types of arc welding depending upon the type of electrode [Weman Klas, 2003]:
(A): Unshielded arc welding:
When a large electrode or filler rod is used for welding, it is said to be un- shielded arc welding.
(B): Shielded arc welding:
When the welding rods coated with fluxing material are used, then it is called shielded arc welding [Kalpakjian, Serope; Schmid, Steven R. 2001].
1.8 PROBLEM OF THE PROJECT
High skilled operator is required to do arc welding and also heavy to carry because of the iron cores and copper wires.
1.9 PROJECT WORK ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.
CHAPTER TWO: The complete chapter two of “construction of a welding machine 220v/250a” is available. Order full work to download. Chapter two of “construction of a welding machine 220v/250a” consists of the literature review. In this chapter all the related work on “construction of a welding machine 220v/250a” was reviewed.
CHAPTER THREE: The complete chapter three of “construction of a welding machine 220v/250a” is available. Order full work to download. Chapter three of “construction of a welding machine 220v/250a” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of “construction of a welding machine 220v/250a” is available. Order full work to download. Chapter four of “construction of a welding machine 220v/250a” consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of “construction of a welding machine 220v/250a” is available. Order full work to download. Chapter five of “construction of a welding machine 220v/250a” consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.