DESIGN ANALYSIS AND CONSTRUCTION OF A 2.2KW SINGLE PHASE SUBMERSIBLE PUMP CONTROL STARTER
USER'S INSTRUCTIONS: The project work you are about to view is on "design analysis and construction of a 2.2kw single phase submersible pump control starter". Please, sit back and study the below research material carefully. This project topic"design analysis and construction of a 2.2kw single phase submersible pump control starter"have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this"design analysis and construction of a 2.2kw single phase submersible pump control starter"project research material is to reduce the stress of moving from one school library to another all in the name of searching for"design analysis and construction of a 2.2kw single phase submersible pump control starter"research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work,"design analysis and construction of a 2.2kw single phase submersible pump control starter"by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work"design analysis and construction of a 2.2kw single phase submersible pump control starter"research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of"design analysis and construction of a 2.2kw single phase submersible pump control starter"is to be ordered for. Happy viewing!!!
In countries including such as Nigeria, a city water authority supplies the clean water and pumps it into large ground-level storage tanks. A resident’s water pump then pumps the water to a water tank on top of his/her house. When the water level in the ground-level storage tank becomes too low, the pump siphons air and shuts down, requiring a resident to manually prime the water pump to get it running again. Residents struggle to monitor the water level of the tanks effectively and keep the pump running properly. To remedy the issue, the automatic submersible water pump starter system monitors the water levels and controls the pump as necessary to prevent breakdown and maximize water storage without overfilling the rooftop tank and wasting water.
TABLE OF CONTENT
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM AND OBJECTIVE OF THE PROJECT
- SCOPE OF THE PROJECT
- APPLICATION OF THE PROJECT
- PROJECT JUSTIFICATION
- PROJECT ORGANIZATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 INTRODUCTION
2.2 OVERVIEW OF THE STUDY
2.3 REVIEW OF RELATED STUDIES
2.4 REVIEW OF DIFFERENT TYPES OF WATER SENSOR
2.5 REVIEW OF THE PROPOSED STUDY
CHAPTER THREE
3.0 METHODOLOGY
3.1 SYSTEM DESCRIPTION
3.2 PICTORIAL DIAGRAM
3.3 INSTALLATION TOOLS REQUIRED
3.4 INSTALLATION PROCEDURE
CHAPTER FOUR
4.0 TEST AND RESULT ANALYSIS
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUNDOF THE PROJECT
The project “automatic submersible water pump starter” is design to monitor the level of liquid in the tank. The system has an automatic pumping system attached to it so as to refill the tank once the liquid gets to the lower threshold, while offing the pump once the liquid gets to the higher threshold. Sustainability of available water resource in many reason of the word is now a dominant issue. This problem is quietly related to poor water allocation, inefficient use, and lack of adequate and integrated water management. Water is commonly used for agriculture, industry, and domestic consumption. Therefore, efficient use and water monitoring are potential constraint for home or office water management system. Moreover, the common method of level control for home appliance is simply to start the feed pump at a low level and allow it to run until a higher water level is reached in the water tank. This water level control, controls monitor and maintain the water level in the overhead tank and ensures the continuous flow of water round the clock without the stress of going to switch the pump ON or OFF thereby saving time, energy, water, and prevent the pump from overworking Besides this, liquid level control systems are widely used for monitoring of liquid levels in reservoirs, silos. Proper monitoring is needed to ensure water sustainability is actually being reached with disbursement linked to sensing and automation.
1.2 PROBLEM STATEMENT
This project is carried out so as to provide an easy means of designing of submersible water level starting system is not a major task and we have made the system in such a way that it is possible to install the system yourself with minimum electrical knowledge or with the help of a simple electrician.
1.3 AIM AND OBJECTIVES OF THE PROJECT
The main aim of this work is to carry out a research on how to install an automatic submersible water pump starter. The objectives of the study are:
- To provide an easy means of installing submersible water pump motor.
- To get acquainted to automatic switching ON of overhead tank (OHT) when water falls below the lower limit.
- To avoid damages on the water controller due to wrong installation
1.4 JUSTIFICATIONOF THE PROJECT
Automatic submersible water level starter came into existence because of human error and inconsistence that is associated with manually operated water pumping machine, and there different designs of water pump controller but all the designs has the same installation procedures. It has been observed that many people finds it difficult to install a water pump whenever they purpose it even when the user’s operating manual is been giving to them. The study was designed to create an avenue where the user of the device can get build automatic submersible water pump starter without or little assistance from an electrician
1.5 APPLICATION OF THE PROJECT
They are useful devices and play an important role in various industries such as automobile, irrigation, and also at homes, or wherever water is pump either underground or overhead.
1.6 SCOPE OF THE PROJECT
The project was design to automatically control the pump which ensures constant reserve of water in the reservoir. The scope of the work covers studying how to design an automatic submersible water pump starter. The task of installation comprises of two parts, the Power Connection and the Sensing Connection. The Power Connection is the connection between the automatic submersible water pump starter and your existing Starter with which you are presently operating the Pumpset. The Single Phase Borewells will usually have a starter with start capacitors and run capacitors inside. The starter will have voltage and current meters with ON and OFF Push Buttons on the Door of the Panel. To Control such starters the control wiring will be done only to the ON and OFF Push Buttons. But when the controller is implemented it will involve using sensors to control the ON and OFF of the water pump.
CHAPTER FIVE
5.0 CONCLUSION
The course of undergoing this project has disclosed numerous important things about an automatic submersible water pump starter. Ranging from its economic importance and recommendation based on the use of this automatic submersible water pump starter. Hence with the successful design and construction of this project, a more efficient way of ensuring continuous flow and pumping of water is provided even in the absence of the operator. This provides the possibility that is can still put on his/her appliance (pump) in the absence of the user.
5.1 RECOMMENDATION
This project is designed to be used in our homes and industries where the need for accurate flow and pumping of water is needed. And should be used and maintain by a qualified personnel.
It is recommended to connect the Live wire to automatic submersible water pump starter device through a switch.
Installation involves some connections which operate at 220V AC and should be done by electrician or trained personnel only.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of"design analysis and construction of a 2.2kw single phase submersible pump control starter"is also available. Order full work to download. Chapter two of"design analysis and construction of a 2.2kw single phase submersible pump control starter"consists of the literature review. In this chapter all the related work on"design analysis and construction of a 2.2kw single phase submersible pump control starter"was reviewed.
CHAPTER THREE: The complete chapter three of"design analysis and construction of a 2.2kw single phase submersible pump control starter"is available. Order full work to download. Chapter three of"design analysis and construction of a 2.2kw single phase submersible pump control starter"consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of"design analysis and construction of a 2.2kw single phase submersible pump control starter"is available. Order full work to download. Chapter four of"design analysis and construction of a 2.2kw single phase submersible pump control starter"consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of"design analysis and construction of a 2.2kw single phase submersible pump control starter"is available. Order full work to download. Chapter five of"design analysis and construction of a 2.2kw single phase submersible pump control starter"consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
