USER'S INSTRUCTIONS: The project work you are about to view is on "design and construct an automatic water leveler for a 1.5hp pumping machine". Please, sit back and study the below research material carefully. This project topic ( design and construct an automatic water leveler for a 1.5hp pumping machine) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construct an automatic water leveler for a 1.5hp pumping machine" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construct an automatic water leveler for a 1.5hp pumping machine" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their s[tudents to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF AN AUTOMATIC WATER LEVELER FOR A 1.5HP PUMPING MACHINE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, " design and construct an automatic water leveler for a 1.5hp pumping machine" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "
design and construct an automatic water leveler for a 1.5hp pumping machine" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "
design and construct an automatic water leveler for a 1.5hp pumping machine" visible for everyone, then the complete material on "
design and construct an automatic water leveler for a 1.5hp pumping machine" is to be ordered for. Happy viewing!!!
Water scarcity is one of the major problems facing many cities of the world and wastage during transmission has been identified as a major culprit; this is one of the motivations for this study, to deploy computing techniques in creating a barrier to wastage in order to not only provide more financial gains and energy saving, but also help the environment and water cycle which in turn ensures that we save water for future. The present study involves automatic control system to maintain water level in tank. This system enables to switch ON-OFF pump as per the requirement of water and the system has the ability to detect the level of water in a tank, switch on/off the pump accordingly.
TABLE OF CONTENT
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM AND OBJECTIVE OF THE PROJECT
- PROJECT MOTIVATION
- PURPOSE OF THE PROJECT
- APPLICATION OF THE PROJECT
- LIMITATION OF THE PROJECT
- PROBLEM OF THE PROJECT
- ADVANTAGE OF THE PROJECT
- PROJECT ORGANIZATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF THE STUDY
2.2 REVIEW OF RELATED STUDIES
CHAPTER THREE
3.0 METHODOLOGY
3.1 SYSTEM BLOCK DIAGRAM
3.2 CIRCUIT DIAGRAM
3.3 CIRCUIT DESCRIPTION
3.4 CIRCUIT OPERATION
3.5 POWER SUPPLY UNIT
3.6 DESCRIPTION OF MAJOR COMPONENTS USED
CHAPTER FOUR
4.0 RESULT DISCUSSION
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 BIBLIOGRAPHY
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Water is a universal solvent which plays an important role in our everyday life. It is used in everyday activities. Rain water is the most accessible source of water in most localities, but in the last century pipe – borne water was invented. This water is free from germs but contains some mineral salts; it is generally accepted in most countries and is used as a source of drinking water. The world is experiencing water shortage, which implies that water source should be managed so as to minimize wastage. In some homes, we will find out that the boreholes and wells have tanks for water storage before pumping up to the overhead tank. People generally switch on their water pump when their tanks are short of water i.e. when the taps stop running and switch off the water pump when the tanks start over flowing. This results in unnecessary wastage and sometimes unavailability of water in cases of emergency.
At the household level, people switch on the water pumps and set off to work or even fall asleep, forgetting to switch off the mains when the tank or reservoir is full. This results to wastage and often flood. The average pumping machine is not in control of the amount of liquid or water it pumps. If the water is left running for over a long period of time without stoppage, it can constitute a form of hazard by flooding the area. Automatic water pump controller is a series of functions to control the Automatic Water Pump Controller Circuit in a reservoir or water storage. The water level sensor is made with a metal plate mounted on the reservoir or water tank, with a sensor in the short to create the top level and a detection sensor for detecting long again made for the lower level and ground lines connected to the bottom of reservoirs or reservoir.
In everyday life, there must be some physical elements that need to be controlled in order for them to perform their expected behaviors. A control system therefore can be defined as a device, or set of devices, that manages, commands, directs or regulates the behavior of other device(s) or system(s). Consequently, automatic controlling involves designing a control system to function with minimal or no human interference. Intelligent systems are being used in a wide range of fields including from medical sciences to financial sciences, education, law, and so on. Several of them are embedded in the design of everyday devices.
This paper aimed at presenting our project in embedding a control system into an automatic water pump controller for a 1.5hp water pump.
1.2 PROBLEM STATEMENT
It has been discovered that Most of households run out of water because of the inability to see when the take gets to the lower threshold and also sometimes they will ON the water pumping machine but forget to OFF it when the water tank becomes full and this causes waste. Automatic water control system provides significant solution to this issue. Methodology of this system is all depend on the electric conductivity of water and logical signals given to different logic gates. This system terminates the water pump from over flow and also automatically switches it ON when the water in the tank gets below certain level.
1.3 AIM AND OBJECTIVE OF THE STUDY
The main of this project is to build an automatic pump control system which monitors the level of liquid in the tank. The system has an automatic pumping system attached to it so as to refill the tank once the liquid gets to the lower threshold, it off the pump once the liquid gets to the higher threshold. Objectives of the work are:
- To monitor the level of water in the tank
- To incorporate an interactive medium between the end user and the machine
- To prevent over labor of the pumping machine
- To avoid waste of water
- To save electric energy
1.4 PROJECT MOTIVATION
This research was the need to bring a solution to the problem of water shortage in various places eliminating the major culprit; waste of water during pumping and dispensing into overhead thanks. We believe that creating a barrier to wastage will not only provide more financial gains and energy saving, but will also help the environment and water cycle which in turn ensures that we save water for our future.
1.5 PURPOSE OF THE PROJECT
The main purpose of designing this device is to avoid water wastage, overuse of water pump and to reduce the labour of the user.
1.6 APPLICATION OF THE PROJECT
This device can be useful in places like:
- Farm (for irrigation),
- homes,
- worship centres
- industries
1.7 LIMITATION OF THE STUDY
As we all know that no human effort to achieve a set of goals goes without difficulties, certain constraints were encountered in the course of carrying out this project and they are as follows:-
- Difficulty in information collection: I found it too difficult in laying hands of useful information regarding this work and this course me to visit different libraries and internet for solution.
- Difficulty in parts gathering: I found it too difficult when gathering electronics parts used for the prototype.
1.8 PROBLEM OF THE PROJECT
Water sensors used are built with conductive material, which means that they are subject to rusting or corrosion. When rusting occurred the sensors will stop conducting thereby causing this device will stop working.
1.9 ADVANTAGES OF THE PROJECT
Saves Power
By using our project, we can save power. I can be used in places where there is problem of Load Shedding. As it is automatically controlled, it limits the amount of electricity. As today energy conservation is the utmost need, using one of these devices is useful.
Saves Money
Now, as we know that automatic water level controller conserves power, it saves money as well. Water regulation is optimized using this device that means wastes electricity and wasted water is kept at a minimum. This saves a huge amount of money along with manpower.
Works Automatically
The most utmost advantage of water level controller I that it can work on its own. It is because of relay and timer switches that there is no need to operate them manually. This means that a lot of human work is reduced.
Maximizes Water
Additionally, water usage can be maximized with a water level controller. Often, water pumps get more use during the middle of the day. A water level controller is helpful because it automatically provides more water during the middle of the day and less water at night. As a result, water remains at its appropriate level at all times.
1.10 PROJECT WORK ORGANISATION
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of " design and construct an automatic water leveler for a 1.5hp pumping machine" is also available. Order full work to download. Chapter two of " design and construct an automatic water leveler for a 1.5hp pumping machine" consists of the literature review. In this chapter all the related work on " design and construct an automatic water leveler for a 1.5hp pumping machine" was reviewed.
CHAPTER THREE: The complete chapter three of " design and construct an automatic water leveler for a 1.5hp pumping machine" is available. Order full work to download. Chapter three of " design and construct an automatic water leveler for a 1.5hp pumping machine" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of " design and construct an automatic water leveler for a 1.5hp pumping machine" is available. Order full work to download. Chapter four of " design and construct an automatic water leveler for a 1.5hp pumping machine" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a " design and construct an automatic water leveler for a 1.5hp pumping machine" is available. Order full work to download. Chapter five of " design and construct an automatic water leveler for a 1.5hp pumping machine" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
