USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction a police siren using 555 timers" Please, sit back and study the below research material carefully. This project topic "design and construction a police siren using 555 timers" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction a police siren using 555 timers" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction a police siren using 555 timers" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN AND CONSTRUCTION A POLICE SIREN USING 555 TIMERS

BY

---
EE/H2013/01430
DEPARTMENT OF ---
SCHOOL OF --
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and construction a police siren using 555 timers" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a B.Sc on --- has been approved.

By
Dr. ---                                                    Dr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
 Dr. ---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work “design and construction a police siren using 555 timers” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” visible for everyone, then the complete material on “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” is to be ordered for. Happy viewing!!!

---

A police siren is a loud electronics device that produces sound similar to police siren. Siren is used to get other road users or drivers on the road out of their way. This project is on police siren sound that sound effects like the siren of an ambulance or police car which features low-pitched tones alternately. This project will be comprised of the oscillator circuits of two set. Using IC-555 timer IC are main both unit. The first oscillator serve determine time period in changing a high-low sound tone, provide the proper frequencies about 0.5-1 Hertz. Then, second oscillator set the siren sound, before out to a speaker. 

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE

• INTRODUCTION
• BACKGROUND OF THE PROJECT
• PROBLEM STATEMENT
• OBJECTIVE OF THE STUDY
• PURPOSE OF THE PROJECT
• SIGNIFICANCE OF THE PROJECT
• THE EFFECTS OF POLICE SIRENS
• SCOPE OF THE PROJECT
• APPLICATION OF THE PROJECT
• METHODOLOGY
• PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

• OVERVIEW OF THE PROJECT
• ASTABLE MULTIVIBRATOR USING 555 TIMER
• DESCRIPTION OF 555 TIMER IC
• HISTORICAL BACKGROUND OF 555 TIMERS

CHAPTER THREE
3.0          METHODOLOGY

• SYSTEM BLOCK DIAGRAM
• SYSTEM DESCRIPTION
• SYSTEM SCHEMATIC DIAGRAM
• SYSTEM OPERATION
• PARTS LIST
• DESCRIPTION OF MAJOR COMPONENTS USED

CHAPTER FOUR
4.0      TEST AND RESULT ANALYSIS

• CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
• CASING AND PACKAGING
• ASSEMBLING OF SECTIONS
• TESTING OF SYSTEM OPERATION
• INSTALLATION OF THE COMPLETED DESIGN
• COST ANALYSIS

CHAPTER FIVE

• CONCLUSION
• RECOMMENDATION
• REFERENCES

CHAPTER ONE
1.0                                                        INTRODUCTION
1.1                                         BACKGROUND OF THE PROJECT
Nowadays, there are a lot of emergency lights systems being used all over the world, and we cannot discuss all in this work. Siren has been around for a while and, although the most common type today is the so-called lightbar, there was a time when the whole system was a lot simpler. In 1940, security departments used just a single beacon to attract everyone's attention and let them know that an official vehicle is approaching. Just like it happens today, when the siren was turned on, the other drivers (if any, given the traffic values at that time) were requested to clear the road and thus allow the security to pass safely.

Using this kind of technology had multiple advantages and the ace up its sleeve was definitely the cost. Purchasing a single beacon was of course a lot more affordable than investing in more complex solutions. Plus, since cars weren't quite that fast at that time, the air resistance such a beacon had to face was pretty low, which means it could serve its purpose very well.
But time passed by and law enforcement agencies looked for more advanced and, extremely importantly, more efficient technologies. The single beacon we were talking about turned into a magnetic-mount system that allowed on-the-go use and which, in its turn, got replaced by full-sized light bars with multiple sound.
What you're seeing today is what could be called the modern light bar which is, in essence, a contemporary interpretation of the traditional light bar introduced in early 1990s. Obviously, the siren sound may vary by country and the law enforcement organization that owns the vehicles.

1.2                                                  PROBLEM STATEMENT
When police is in state of emergency can be traffic jammed and sometimes can also cause accident to motorist if their approach is not made known to the motorist and pedestrians. Police vehicles use a siren together with police lights for the purpose of warning motorists of their approach. Motorists are always expected to give priority to police vehicles that are responding to an emergency and can be recognized by the sound of a siren.
Police vehicles use a siren with the main goal of signaling their approach. This gives drivers more than enough time to react appropriately as this is essential due to the high speed associated with police cars responding to an emergency. The siren needs to be loud and clear, and there are specific sirens used for use only on police vehicles. This identifies sound as an approaching police car and cannot be confused with a siren used for any other reason.

1.3                                             OBJECTIVE OF THE PROJECT
The objective of this study is to design an electronic device that produces siren sound. This device was built around 555 timer integrated circuits. The 555 timer IC is an integrated circuit (chip) used for pulse generation, and oscillator applications. This device has the ability to produce different siren sounds when the potentiometer of the circuit is tuned.

1.4                                         SIGNIFICANCS OF THE PROJECT
Police sirens are a necessity when officers are called to respond to a crime, clearing road traffic to allow a quicker response, the sirens serve as a calling card to the criminal and the victim that the police are on the way. Sirens are to alert people that an emergency vehicle is approaching so that they can get out of its way.  As such, the sirens are designed to catch drivers and pedestrians attention.

1.5                                              PURPOSE OF THE PROJECT
The purpose of this work is to design an outdoor siren sound generating system which is used to alert persons outside of potential danger. The sirens are sounded whenever a warning is issued. They may also be activated for other situations which require citizens to take shelter and seek more information from media outlets.

1.6                                          THE EFFECTS OF POLICE SIRENS
Aside from clearing road traffic to allow a quicker response Sirens have ulterior effects, from societal to health issues.

Loss of Hearing

• The average person has 30,000 hair cells the transmit sound waves into nerve impulses. Loud noise destroys them, thus affecting your hearing. Long term or close, sudden exposure to the average siren, at 123 decibels, can affect hearing and even cause hearing loss.

Increased Blood Pressure and Heart Rate

• The World Health Organization said in 2008 that sudden noise from police sirens not only increases noise pollution, but also impacts a person's health, raising their heart rate and blood pressure and posing a serious health issue.

Bad Neighborhood

• The constant sound of sirens can negatively affect an entire community, adding to a perception that the community is a "high crime" area or one where there is "increased danger" for residents.

Traffic Danger

• Accidents, sometimes fatal, do occur when police cars race to a crime scene with their sirens wailing. Once a driver hears the siren, his first instinct is to turn to the side of the road. But drivers may hear the siren and not see the police car, and their efforts to locate the police takes their eyes off the road, and into danger.

No Sleep

• sirens wailing throughout the night, particularly in high crime urban areas, interfere with sleep, which produces stress and anxiety. Police in many cities, such some major cities in Nigeria, must follow strict guidelines when using their sirens when called to a crime.

1.7                                                 SCOPE OF THE PROJECT
This siren simulated electronic project uses two 555 timers IC to generate a sound similar to the police siren. A single 556 timer IC which consists of two 555 timers can also be used. In this circuit, both of the timers are configured as astable circuit.
The first timer is configured as a square wave close to 1 Hz astable oscillator. The output of this timer is used to feed the control voltage of the second timer where it is subjected to frequency modulation. This frequency modulation will generate a tone similar to the siren. From the circuit, when the variable resistor is tuned, the siren will produce different sound.

1.8                                          APPLICATION OF THE PROJECT
Sirens are used on emergency service vehicles such as:

•  ambulances,
• police cars,
•  Federal road safety corps,
• fire trucks.
• And other security personnel

1.9                                         METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

• Study of the previous work on the project so as to improve it efficiency.
• Draw a block diagram.
• Test for continuity of components and devices,
• programming of microcontroller
• Design and calculation for the changeover was carried out.
• Studying of various component used in circuit.
• Construct a digital changeover circuit.
• Finally, the whole device was cased and final test was carried out.

1.10                                      PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this project. In this chapter, the background, significance, objective limitation and problem of this project were discussed.
Chapter two is on literature review of this project. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.

CHAPTER TWO: The complete chapter two of “design and construction a police siren using 555 timers” is available. Order full work to download. Chapter two of “design and construction a police siren using 555 timers” consists of the literature review. In this chapter all the related work on “design and construction a police siren using 555 timers"

CHAPTER THREE: The complete chapter three of “design and construction a police siren using 555 timers” is available. Order full work to download. Chapter three of “design and construction a police siren using 555 timers” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of design and construction a police siren using 555 timers” is available. Order full work to download. Chapter four of “design and construction a police siren using 555 timers” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction a police siren using 555 timers” is available. Order full work to download. Chapter five of “design and construction a police siren using 555 timers” consist of conclusion, recommendation and references.

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.

---

For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com

---

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.