USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of 4-way channel audio mixer with public address system". Please, sit back and study the below research material carefully. This project topic ( design and construction of 4-way channel audio mixer with public address system) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of 4-way channel audio mixer with public address system" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of 4-way channel audio mixer with public address system" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF 4-WAY CHANNEL AUDIO MIXER WITH PUBLIC ADDRESS SYSTEM
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, " design and construction of 4-way channel audio mixer with public address system" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "
design and construction of 4-way channel audio mixer with public address system" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "
design and construction of 4-way channel audio mixer with public address system" visible for everyone, then the complete material on "
design and construction of 4-way channel audio mixer with public address system" is to be ordered for. Happy viewing!!!
This work is on a four channel audio mixer with public addressing system. This system does the work of combining (for audio selection) and modifying audio signals (for public addressing). Audio mixers are also called mixing consoles and soundboards. Mixers are most often used by recording studios but are also typically used in live situations by live sound engineers.
The aim of this work is to design and construct a 4-channel mixer which can accept four different audio input at the same time and mix their different tracks by changing their volume levels, adding effects and changing the timbre of each instrument on the tracks with public addressing system.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM AND OBJECTIVE OF THE PROJECT
- LIMITATION AND SCOPE OF PROJECT
- APPLICATION OF THE PROJECT
- LIMITATION OF THE STUDY
- SIGNIFICANCE OF THE STUDY
- RESEARCH METHODOLOGY
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- INTRODUCTION
- HISTORICAL BACKGROUND OF THE STUDY
- THEORIES CONCEPT RELEVANT TO THE RESEARCH
- OVERVIEW OF PUBLIC ADDRESSING SYSTEM
- HISTORICAL BACKGROUND OF PUBLIC ADDRESSING SYSTEM
- DIFFERENT TYPES PUBIC ADDRESSING SYSTEM
CHAPTER THREE
METHODOLOGY
- INTRODUCTION
- BLOCK DIAGRAM
- SYSTEM CIRCUIT DIAGRAM
- EXPLANATION OF THE VARIOUS COMPONENTS IN THE PROJECT
CHAPTER FOUR
4.0 TESTING AND RESULTS
- INTRODUCTION
- CONSTRUCTION OF THE PROJECT
- TEST RESULT OF TESTS
CHAPTER FIVE
- CONCLUSION
- PROBLEM ENCOUNTERED
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY PROJECT
Audio mixer is an electronic device for combining, routing, and changing the level, timbre and/or dynamics of audio signals. A mixer can mix analog or digital signals, depending on the type of mixer. The modified signals (voltages or digital samples) are summed to produce the combined output signals.
Mixing mixers are used in many applications, including recording studios, public address systems, sound reinforcement systems, broadcasting, television, and film post-production. An example of a simple application would be to enable the signals that originated from two separate microphones to be heard through one set of speakers simultaneously. When used for live performances, the signal produced by the mixer will usually be sent directly to an amplifier, unless that particular mixer is "powered" or it is being connected to powered speakers. Among the highest quality bootleg recordings of live performances are the so-called soundboard recordings that are sourced from this mixer output to the speakers.
Prior to the emergence of digital audio workstations (DAWs), the process of mixing used to be carried out on a mixing console. Currently, more and more engineers and independent artists are using a personal computer for the process. Mixing consoles still play a large part in the recording process. They are often used in conjunction with a DAW, although the DAW may only be used as a multitrack recorder and for editing or sequencing, with the actual mixing being performed on the mixer. This device has an inbuilt public addressing system which is for public address; it has an estimated power rating of 20watts.
1.2 STATEMENT OF THE PROBLEM
In music industry, selection of different audio input to produce one output is always a problem in that it involves much labour. Mixers allow for precise tuning of microphone inputs and speaker outputs. The result is clearer sound, and more volume from the sound system before feedback occurs whilst the public addressing system is used in overcoming communication problems that usually occur in areas where it is hard to find a device for making important announcements or speeches so that everyone can listen precisely to what the speaker is talking about. This simple project may also be used by lecturers in lecture halls to bridge communication gap between the lecturers and student in a lecture, as shouting during lectures may be very exhausting.
1.3 RESEARCH AIM AND OBJECTIVE
The main aim of this work is to design an audio device which have and can accept four different audio inputs then with only one output with an inbuilt public addressing system. And the level of each audio input is controlled with potentiometer. The objectives are:
- To have a public addressing system
- To accept four different audio input to give out one output
- is to construct an electronic sound amplification and distribution device with a microphone, amplifier and loudspeakers
1.4 LIMITATION AND SCOPE OF PROJECT
This device was built using lm381 and lm386 are operational amplifier. Each of the amplifiers of lm381 is completely independent, with individual internal power supply decoupler-regulator, providing 120 dB supply rejection and 60 dB channel separation. Other outstanding features include high gain (112 dB), large output voltage swing (VCC b 2V) p-p, and wide power bandwidth (75 kHz, 20 Vp-p). High gain op amp combines up to four individually controlled input signals. This system is for audio selection and public address; it has an estimated power rating of 20watts. For power supplies, it uses a 220/12Vac transformer for the amplifier and loudspeaker units. It has a power On/Off button with volume control.
1.5 APPLICATION OF THE PROJECT
This system can use in places such as:
- school auditoriums,
- churches, and small bars.
- PA systems with many speakers are widely used to make announcements in public, institutional and commercial buildings and locations.
1.6 LIMITATION OF THE STUDY
As we all know that no human effort to achieve a set of goals goes without difficulties, certain constraints were encountered in the course of carrying out this project and they are as follows:-
- Difficulty in information collection: I found it too difficult in laying hands of useful information regarding this work and this course me to visit different libraries and internet for solution.
- Difficulty in parts gathering: I found it too difficult when gathering electronics parts used for the prototype.
- Financial Constraint: Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet, questionnaire and interview).
- Time Constraint: The researcher will simultaneously engage in this study with other academic work. This consequently will cut down on the time devoted for the research work.
1.5 SIGNIFICANCE OF THE STUDY
This research work will throw more light on audio mixing and public addressing techniques. This study will also be designed to be of immense benefit to all the users of audio mixer and public addressing system.
It will also serve as a guide to whoever that wants to purchase audio mixer and public addressing system.
1.6 RESEARCH METHODOLOGY
In the course of carrying this study, numerous sources were used which most of them are by visiting libraries, consulting journal and news papers and online research which Google was the major source that was used.
1.7 PROJECT ORGANISATION
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of " design and construction of 4-way channel audio mixer with public address system" is also available. Order full work to download. Chapter two of " design and construction of 4-way channel audio mixer with public address system" consists of the literature review. In this chapter all the related work on " design and construction of 4-way channel audio mixer with public address system" was reviewed.
CHAPTER THREE: The complete chapter three of " design and construction of 4-way channel audio mixer with public address system" is available. Order full work to download. Chapter three of " design and construction of 4-way channel audio mixer with public address system" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of " design and construction of 4-way channel audio mixer with public address system" is available. Order full work to download. Chapter four of " design and construction of 4-way channel audio mixer with public address system" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a " design and construction of 4-way channel audio mixer with public address system" is available. Order full work to download. Chapter five of " design and construction of 4-way channel audio mixer with public address system" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
