DESIGN AND CONSTRUCTION OF A 1.5KVA UNTERUPTIBLE POWER SUPPLY USING SG3524N
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a 1.5kva unteruptible power supply using sg3524n" Please, sit back and study the below research material carefully. This project topic "design and construction of a 1.5kva unteruptible power supply using sg3524n" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a 1.5kva unteruptible power supply using sg3524n" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a 1.5kva unteruptible power supply using sg3524n" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF A 1.5KVA UNTERUPTIBLE POWER SUPPLY USING SG3524N
BY
---
EE/H2013/01430
DEPARTMENT OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of a 1.5kva unteruptible power supply using sg3524n" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.
By
Dr. --- Dr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Dr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work “design and construction of a 1.5kva unteruptible power supply using sg3524n” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “design and construction of a 1.5kva unteruptible power supply using sg3524n” visible for everyone, then the complete material on “design and construction of a 1.5kva unteruptible power supply using sg3524n” is to be ordered for. Happy viewing!!!
The purpose of this project is to design and construct an uninterruptible power supply. Uninterruptible power supply is a voltage regulatory and uninterruptible power device planned to electromechanically sustain a constant voltage level and supply an uninterruptible power to devices.
This device receive minimum voltage of 120vac and maximum of 260vac and filter the current and voltage thereby brings out suitable voltage output to be used by the devices in it, then when there an unexpected power outage from the utility mains or generator the system will automatically switch over to the inverter source thereby providing additional power to the appliances in use without interruption. This device stabilizes an AC input voltage of 120-260V to give an AC output voltage of 240V, provide a rechargeable backup power supply the system and also provide low battery indication automatically. The automatic feature can be achieved by the electronics devices used such SG3524N IC, electro-magnetic device (relay), auto- transformer and other electronics devices.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PURPOSE OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- SCOPE OF THE PROJECT
- LIMITATION OF THE PROJECT
- DEFINITION OF THE PROJECT
- METHODOLOGY
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- DESCRITION OF UNTERUPTIBLE POWER SUPPLY
- HISTORICAL BACKGROUND OF UPS
- THE POWER SUPPLY
- THEORY OF TRANSFORMER
- OPERATION OF THE TRANSFORMER
- VOLTAGE TRANSFORMER RATION (K)
- TRANSFORMER LOSSES
CHAPTER THREE
METHODOLOGY
- SYSTEM BLOCK DIAGRAM
- SYSTEM CIRCUIT DIAGRAM
- SYSTEM OPERATION
- The oscillator stage
- Power drive stage for pwm ups circuit with charger
- Battery charging section
- DESCRIPTION OF COMPONENTS USED
CHAPTER FOUR
4.0 TEST AND RESULT ANALYSIS
- CONSTRUCTION PROCEDURE AND TESTING
- CASING AND PACKAGING
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- COST ANALYSIS
- PROBLEM ENCOUNTERED
- PRECAUSION
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
In this modern society, electricity has great control over the most daily activities for instance in domestic and industrial utilization of electric power for operations. Electricity can be generated from public supply to consumers in different ways including the use of water, wind or steam energy to drive the turbine as well as more recently the use of gas. Generators, solar energy and nuclear energy are also source of electricity.
In Nigeria and some other parts of the world today, the electricity power supply to consumers (at homes and industries) is not maintained at a stipulated voltage say 240 volts. But the electronic gadgets and some other power operated machines, that we use in our homes, offices and industries requires power with constant and interruptible for their efficiency, and to avoid damage by the voltage. In Nigeria, there is inconsistence supply of electricity by the power supplying company to the consumers. The use of additional electric power source such as electric power generators and most recently the use of semiconductor power devices such as the Bipolar Transistor, Thyristors and particularly MOSFET to generate electric power in conjunction with a DC battery in few kilowatts. An Inverter offers a better additional power source to Generators as well as UPS considering its long duration, cost effectiveness and maintainability.
Uninterruptible Voltage supply is an electronic control circuit or device that is capable of providing a constant output voltage even when there is variation in load or input voltage as low as 160 volt can be boost up to 240 volt by stabilizer at output stage without any voltage fluctuation with a backup battery which provide additional power to the device during mains power outage.
It is designed to meet up with the AC voltage safety, stability and accuracy demand in industries and in homes. Uninterruptible power supply is useful in devices such as computer Power supplies, alternators and central power station generator plants, voltage regulators control the output of the plant. In an electric power distribution system, voltage regulators may be installed at a substation or along distribution lines so that all customers receive steady voltage independent of how much power is drawn from the line.
An uninterruptible power supply is designed to automatically maintain a constant AC voltage level. An AC Voltage supply may be a simple "feed-forward" design or may include negative feedback control loops. It makes use an electromechanical mechanism, and other electronic components. Depending on the design, it may be used to regulate one or more AC voltages.
This project is designed to stabilize an AC input voltage of 160-250V to give an AC output voltage of 240V at 50Hz automatically. The automatic feature can be achieved by the electronics devices used such voltage comparator IC, electro-magnetic device (relay), auto- transformer and other electronics devices
1.1 PURPOSE OF THIS PROJECT
The purpose of this project is to design and construct an uninterruptible power supply. This device stabilizes an AC input voltage of 160-260V to give an AC output voltage of 240V with a backup power source which provide additional power to the device during mains power outage automatically at 50Hz using a 12v battery. The automatic feature can be achieved by the electronics devices used such voltage comparator IC, electro-magnetic device (relay), auto- transformer and other electronics devices.
1.2 OBJECTIVE OF THE PROJECT
The objective of this work is to construct a device whose function is to maintain constant and uninterruptible power to electrical appliances, and power line conditioning to the equipment load of 500w under a wide variety of conditions, even when the utility input voltage, frequency or system load vary widely and also indicate when the battery of the system gets low. An uninterruptible power stabilizer consists of an all copper, multiple tapped, contain independently controlled inverse parallel electronic switches for each of the 7 taps per phase to provide tight voltage regulation, rechargeable battery and an inverter. The phase current shall be monitored for zero current recognition to initiate any required tap change. Linear devices shall be used for line synchronization to prevent phase shift errors normally associated with zero current crossing acquisition.
1.3 SIGNIFICANCE OF THE PROJECT
The uninterruptible power supply is a voltage regulator planned to mechanically sustain a constant voltage level and supply an uninterruptible power to devices. It can also use electromechanical components. It can be used majorly to regulate one or more DC or AC depending on the design. Therefore, the functions of this equipment are very wide and can be used majorly for various purposes. Electronic voltage regulators can be used majorly for various purposes. It has various functions like it can be used mainly for stabilizing the DC voltages that can be used by the processor and its main parts. In central power station generator plants and automobile alternators, voltage regulators control the output of the plant. In this distribution system, it may be installed at along distribution lines so that all clients recognize steady voltage self-regulating of how much power is drawn from the line. There are many functions of operating the AC depending upon the design. It is very good option to maintain the constant voltage level. Automatic voltage regulator is a superb invention of science, which is an electric device designed to authorize a constant voltage in a settable level. It is very helpful to maintain the preferred voltage for the generators within particular limits. The main working of it depends upon the laws of electromechanical physics. It consists of numerous vigorous and unreceptive electrical parts like thermostats, adopters and diodes. Apart from this, there are many reliable Automotive Suppliers in India that produce many kinds of equipments like generator, regulator and other major parts. They are well known for various kinds of functions and various specifications. They not only produce higher quality products, but also they will provide some additional benefits with the parts of these equipments. Auto Voltage Regulator Generator is the most important part for great amplifier to work. Its types are many, but they are highly in functionality and better performance. They are well equipped with self functioning controls and starts up functions which make them very easy and useful to handle easily and completely. They have different sizes, shapes and colors. There are also automatic regulators which are so small that they can be easily places on a small printed circuit board. They are very easy and portable to handle. They may cover a higher volume of small house sometimes. Therefore, there is a wide variety in the uninterruptible power supply sand each has its own specifications.
1.4 THE SCOPE OF THE PROJECT
The design and construction of an uninterruptible power supply is the project we are construction. I am working on this machine because we have some idea on how this machine can be constructed and also on how it works. We are also doing this because we want to learn more about it.
As we have mentioned earlier, this device is a protective device that protects our electrical and electronic appliances out of current and voltage fluctuation and unexpected power interruption. This is how it works. When this system is plugged into the socket or supply, it will receive a minimum voltage of 120vac and filter the current and voltage thereby brings out suitable voltage output to be used by the devices in it, then when there an unexpected power outage from the utility mains the system will automatically switch over to the inverter source thereby providing additional power to the appliances in use.
So, I am building or constructing this device to reduce risk and damages the fluctuation of current / voltage caused by power fluctuations and unexpected power interruption and the device is rated 500W.
1.6 LIMITATION OF THE PROJECT
The system design shall be capable of operating at an input frequency range of -15% to +10% of nominal, without clearing protective devices or causing component failure within the uninterruptible power supply. During mains power outage the system shall be working with inverter source section, but when generator or utility power is restored, the uninterruptible power supply shall automatically restart. Upon turn on or restart, the output of the uninterruptible power supply shall not exceed the specified output regulation limits.
Response Time: The uninterruptible power supply shall respond to any line voltage variation in 1/2 cycle while operating linear or non-linear loads, with a load power factor of 0.60 of unity. Peak detection of the voltage sine wave shall not be permitted to avoid inaccurate tap switching due to input voltage distortion.
Operating Frequency: The uninterruptible power stabilizer shall be capable of operating at +10% to -15% of the nominal frequency, 50Hz.
Rating: this device is rated at 500VA.
Access Requirements: The uninterruptible power supply shall have removable panels on the front, rear and sides as required for ease of maintenance and/or repair.
Metering: An input meter is provided to reading line voltages
Ventilation: The uninterruptible power supply isolation transformer shall be designed for convection cooling. A fan cooling is required for the solid state electronic switching devices.
1.7 DEFINITION
(i) Inverter Unit:This unit converts a DC voltage into an AC voltage with the help of a oscillator, the oscillator ic used is SG3524N IC.
(ii) Automatic Control Unit: This provides all the required control needed to meet up the objectives of the whole system.
(iii) Battery Unit: This is a secondary cell unit capable of storing enough DC voltage of which is later converted to AC voltage.
1.8 METHODOLOGY
In building this project, to achieve the aim and objectives of this work, the following are the steps involved:
- Study of the previous work on the project so as to improve it efficiency.
- Draw a block diagram.
- Design and calculation for uninterruptible power supply.
- Studying of various component of an uninterruptible power supply circuit.
- Construct an uninterruptible power supply circuit.
1.9 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this works is on the introduction to an automatic voltage regulator. In this chapter, the background, significance, objective, aim, scope, limitation and problem, definition of terms of an automatic voltage regulator were discussed.
Chapter two is on literature review of an automatic voltage regulator. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, discussion, recommendation and references.
CHAPTER ONE: The complete chapter one of “design and construction of a 1.5kva unteruptible power supply using sg3524n” is available. Order full work to download. Chapter one of “design and construction of a 1.5kva unteruptible power supply using sg3524n”consists of the literature review. In this chapter all the related work on“design and construction of a 1.5kva unteruptible power supply using sg3524n” was reviewed.
CHAPTER TWO: The complete chapter two of “design and construction of a 1.5kva unteruptible power supply using sg3524n” is available. Order full work to download. Chapter two of “design and construction of a 1.5kva unteruptible power supply using sg3524n” consists of the literature review. In this chapter all the related work on “design and construction of a 1.5kva unteruptible power supply using sg3524n” was reviewed.
CHAPTER THREE: The complete chapter three of “design and construction of a 1.5kva unteruptible power supply using sg3524n” is available. Order full work to download. Chapter three of “design and construction of a 1.5kva unteruptible power supply using sg3524n” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of “design and construction of a 1.5kva unteruptible power supply using sg3524n” is available. Order full work to download. Chapter four of “design and construction of a 1.5kva unteruptible power supply using sg3524n” consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of “design and construction of a 1.5kva unteruptible power supply using sg3524n” is available. Order full work to download. Chapter five of “design and construction of a 1.5kva unteruptible power supply using sg3524n” consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.