This project aims in providing a user friendly, reliable and automated 3- phase water pump control system for illiterates. Now a day’s technology is running with time, it completely occupied the life style of human beings. Even though there is such an importance for technology in our routine life there are even people whose life styles are very far to this well known term technology. So it is our responsibility to design few reliable systems which can be even efficiently used by them. This basic idea gave birth to this project and this project aims in introducing the automation technology into the lives of the illiterates. Here the automation process is done through the wireless GSM technology and the end user need not require any knowledge about the operation of the GSM mobile. For the efficient usage of the device the end user should know the basic switch operation which is more than sufficient to use this device efficiently.
In this project we make use of two microcontrollers one is dedicated at the 3-phase water pump and the other with the user. Both the microcontrollers form the heart of the device and there are also two GSM modems which are meant for exchanging the commands from one end to the other end. The GSM modem present at the user end is interfaced with few control buttons via micro controller. The each control button has a dedicated functionality such as getting the power status at the motor, turn ON the motor etc. Whenever a control button is pressed it is identified by the microcontroller and generates an equivalent command with respect to the button pressed and forwards the same to the water pump with the help of modem. The modem at the motor receives the commands from the user and feds the same to the microcontroller and the controller performs the equivalent action with respect to the commands received. Here commands are shared between the modems by using the SMS service. The design of this system is very much sensitive and should be handled with utmost care because the microcontroller is a 5 volts device and it is employed to control high voltage 3-phase irrigation water pump. So every small parameter should be given high importance while designing the interfacing circuit between the controller and the water pump. The major advantage of this device is, it can be operated by the illiterates and the status of the motor can also be known by a simple LED indication and more over the device is very economical and can be brought available to the common man.
This material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We make abstract and chapter one visible for everyone.
All Project Topics on this site have complete 5(five) Chapters . Each Project Material include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research for your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view more our related construction (or design) pics
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.