USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a 35 watts audio stereo amplifier". Please, sit back and study the below research material carefully. This project topic ( design and construction of a 35 watts audio stereo amplifier) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a 35 watts audio stereo amplifier" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a 35 watts audio stereo amplifier" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF A 35 WATTS AUDIO STEREO AMPLIFIER
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, " design and construction of a 35 watts audio stereo amplifier" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "
design and construction of a 35 watts audio stereo amplifier" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "
design and construction of a 35 watts audio stereo amplifier" visible for everyone, then the complete material on "
design and construction of a 35 watts audio stereo amplifier" is to be ordered for. Happy viewing!!!
The design and construction of a 35 watts audio amplifier was carried out in this project. The amplifier was designed and constructed successfully using transistor as the major component for voltage amplification. An input voltage of +15v and -15v from a dual power supply was used as input and the result obtained shows that the output was increased by 40% of the input voltage.
TABLE OF CONTENTS
Title Page
Approval Page
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE: INTRODUCTION
1.0 Background of the study
1.1 Objective of the project
1.2 Problem statement
1.3 Application of the project
1.4 Purpose of the project
1.5 Significance of the project
1.6 limitation of the project
1.7 Project organization
CHAPTER TWO: LITERATURE REVIEW
2.1 Historical background of an amplifier
2.2 Review of classification of power amplifiers
2.3 Classification according to mode of operation
2.4 Review of transistor biasing
CHAPTER THREE: DESIGN AND CONSTRUCTION
3.1 Block diagram of an audio power amplifier
3.2 Circuit diagram of a 35w amplifier
3.3 Circuit operation
3.4 Circuit description
3.5 Power supply circuit
3.6 Parts list of 100 watt amplifier circuit
3.7 Description of components used
CHAPTER FOUR: RESULT ANALYSIS
4.0 Construction Procedure and Testing
4.1 Casing and Packaging
4.2 Assembling of Sections
4.3 Testing of System Operation
4.4 Cost Analysis
CHAPTER FIVE
5.1 Conclusion
5.2 Recommendation
5.3 References
- INTRODUCTION
1.1 BACKGROUND OF STUDY
An audio amplifier is an electronic amplifier that amplifies low-power audio signals (signals composed primarily of frequencies between 20 - 20 000 Hz, the human range of hearing) to a level suitable for driving loudspeakers. It is the final electronic stage in a typical audio playback) chain (Matti Otala, 2010).
Audio stereo power amplifier is design to deliver power to the load (speaker), is the product of the voltage and current applied to the load with the output signal power being greater than the input signal power. In other words, a power amplifier amplifies the power of the input signal which is why these types of amplifier circuits are used in audio amplifier output stages to drive loudspeakers (Matti Otala, 2010).
The power amplifier works on the basic principle of converting the DC power drawn from the power supply into an AC voltage signal delivered to the load. Although the amplification is high the efficiency of the conversion from the DC power supply input to the AC voltage signal output is usually poor (Petri-Larmi, M. & Otala, M, 2018).
The preceding stages in such a chain are low power audio amplifiers which perform tasks like pre-amplification (this is particularly associated with record turntable signals), equalization, tone controls, mixing/effects, or audio sources like record players, CD players, and cassette players. Most audio power amplifiers require these low-level inputs to adhere to line levels (Joseph B, 2010).
While the input signal to an audio power amplifier may measure only a few hundred microwatts, its output may be tens or hundreds of watts for a home system or thousands or tens of thousands of watts for a concert sound reinforcement system.
Not all amplifiers are the same and are therefore classified according to their circuit configurations and methods of operation. In “Electronics”, small signal amplifiers are commonly used devices as they have the ability to amplify a relatively small input signal, for example from a Sensor such as a photo-device, into a much larger output signal to drive a relay, lamp or loudspeaker for example (Lee, Thomas, 2014).
There are many forms of electronic circuits classed as amplifiers, from Operational Amplifiers and Small Signal Amplifiers up to Large Signal and Power Amplifiers. The classification of an amplifier depends upon the size of the signal, large or small, its physical configuration and how it processes the input signal, which is the relationship between input signal and current flowing in the load (Lee, Thomas, 2014).
- STATEMENT OF THE PROBLEM
- Addressing crowd used to be difficult, this lead to shouting on top of our voice which lead to loss of voice.
- Sometimes, we desired to play out little audio devices (such as cell phone, DVD, TV, etc) in a way that it can be heard by people from a distance.
In other to bring solution to this problem, an amplifier is used to amplify small audio signal to a level it can be heard from a distance. An audio amplifier is one kind of electronic device, used to increase the amplitude of audio signals that permit it. This type of amplifier increases low-power audio signals to a level which is apt for making loudspeakers.
1.3 AIM OF THE PROJECT
The main aim of this project is to design and construct a 35 watts audio amplifier using TDA2030L as the heart of the circuit.
1.3 OBJECTIVE OF THE PROJECT
The objectives of this project are:
- To build a low cost audio amplifier
- To become familiar with TDA2030L
- Test the audio amplifier
1.4 APPLICATION OF THE PROJECT
Important applications include public address systems, theatrical and concert sound reinforcement systems, and domestic systems such as a stereo or home-theatre system. Instrument amplifiers including guitar amplifiers and electric keyboard amplifiers also use audio power amplifiers. In some cases, the power amplifier for an instrument is integrated into a single amplifier "head" which contains a preamplifier, tone controls, and electronic effects. In other cases, musicians may create a setup with separate rack mount preamplifiers, equalizers, and a power amplifier in a separate chassis (Joseph B, 2010).
1.6 PURPOSE OF THE PROJECT
Amplifier’s main purpose is to take the weak signal and make it strong to drive a speaker. The stereo power amplifiers usually get necessary amplification energy of input signals from the AC supply.
1.7 SIGNIFICANCE OF THE PROJECT
Today there are many categories of amplifiers used for multifarious purposes. In simple terms an amplifier picks up a weak signal and converts it into a strong one. It is widely used in several devices to boost electrical signals. Radios, televisions and telephones are a few examples to point out in this regard. There are innumerable other applications of amplifiers and it is not easy to enumerate all of them. Some of the common types of amplifiers are used in electronic gadgets and audio systems. These are also used in musical instruments and guitars (Joseph B, 2010).
1.8 LIMITATION OF THE PROJECT
As we all know that no human effort to achieve a set of goals goes without difficulties, certain constraints were encountered in the course of carrying out this project and they are as follows:-
- Difficulty in information collection: I found it too difficult in laying hands of useful information regarding this work and this course me to visit different libraries and internet for solution.
- Difficulty in parts gathering: I found it too difficult when gathering electronics parts used for the prototype.
- Financial Constraint: Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information, in the process of data collection (internet) and in assembling of electronics parts used.
1.9 RESEARCH METHODOLOGY
In the course of carrying this study, numerous sources were used which most of them are by visiting libraries, consulting journal and news papers and online research which Google was the major source that was used.
1.10 PROJECT ORGANISATION
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of " design and construction of a 35 watts audio stereo amplifier" is also available. Order full work to download. Chapter two of " design and construction of a 35 watts audio stereo amplifier" consists of the literature review. In this chapter all the related work on " design and construction of a 35 watts audio stereo amplifier" was reviewed.
CHAPTER THREE: The complete chapter three of " design and construction of a 35 watts audio stereo amplifier" is available. Order full work to download. Chapter three of " design and construction of a 35 watts audio stereo amplifier" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of " design and construction of a 35 watts audio stereo amplifier" is available. Order full work to download. Chapter four of " design and construction of a 35 watts audio stereo amplifier" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of " design and construction of a 35 watts audio stereo amplifier" is available. Order full work to download. Chapter five of " design and construction of a 35 watts audio stereo amplifier" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
