DESIGN AND CONSTRUCTION OF A BISTABLE MULTIVIBRATOR
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a bistable multivibrator". Please, sit back and study the below research material carefully. This project topic "design and construction of a bistable multivibrator" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a bistable multivibrator" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a bistable multivibrator" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work, "design and construction of a bistable multivibrator" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a bistable multivibrator" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a bistable multivibrator" visible for everyone, then the complete material on "design and construction of a bistable multivibrator" is to be ordered for. Happy viewing!!!
The Bistable Multivibrators circuit is basically a SR flip-flop. This type of multivibrator circuit passes from one state to the other “only” when a suitable external trigger pulse T is applied and to go through a full “SET-RESET” cycle two triggering pulses are required. Bistable Multivibrators can produce a very short output pulse or a much longer rectangular shaped output whose leading edge rises in time with the externally applied trigger pulse and whose trailing edge is dependent upon a second trigger pulse In bisatble multivibrator, the circuit stays in any one of the two stable states. It continues in that state, unless an external trigger pulse is given. This Multivibrator is also known as Flip-flop. This circuit is simply called as Binary.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- APPLICATION OF THE PROJECT
- SCOPE OF THE PROJECT
- DEFINITION OF TERMS
- METHODOLOGY
- PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 OVERVIEW OF BISTABLE MULTIVIBRATOR2.2 HISTORICAL BACKGROUND OF THE STUDY
2.3 DESCRIPTION OF 555 TIMERS IC
2.4 HISTORICAL BACKGROUND OF 555 TIMERS IC
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASICS OF THE SYSTEM
3.2 SYSTEM DIAGRAM
3.3 CIRCUIT DESCRIPTION
3.5 DESCRIPTION OF COMPONENTS USED
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING OF SYSTEM OPERATION
4.4 PACKAGING
4.5 MOUNTING PROCEDURE
4.6 RESULT
CHAPTER FIVE
5.1 CONCLUSION
5.2 REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
A multivibrator is an electronic circuit used to implement a variety of simple two-state devices such as relaxation oscillators, timers and flip-flops. It consists of two amplifying devices (transistors, vacuum tubes or other devices) cross-coupled by resistors or capacitors. The first multivibrator circuit, the astable multivibrator oscillator, was invented by Henri Abraham and Eugene Bloch during World War I.[4][5] They called their circuit a "multivibrator" because its output waveform was rich in harmonics.[6]
The three types of multivibrator circuits are: Astable multivibrator, Monostable multivibrator and Bistable multivibrator. In this work we are focusing on an astable multivibrator which is the type of multivibrator in which the circuit is stable in either state. It can be flipped from one state to the other by an external trigger pulse. This circuit is also known as a flip-flop. It can store one bit of information, and is widely used in digital logic and computer memory.
Bistable Multivibrators operate in a similar fashion to flip-flops producing one of two stable outputs which are the complement of each other
The Bistable Multivibrator is another type of two state device similar to the Monostable Multivibrator we looked at in the previous tutorial but the difference this time is that BOTH states are stable.
Bistable Multivibrators have TWO stable states (hence the name: “Bi” meaning two) and maintain a given output state indefinitely unless an external trigger is applied forcing it to change state.
The bistable multivibrator can be switched over from one stable state to the other by the application of an external trigger pulse thus, it requires two external trigger pulses before it returns back to its original state. As bistable multivibrators have two stable states they are more commonly known as Latches and Flip-flops for use in sequential type circuits.
The discrete Bistable Multivibrator is a two state non-regenerative device constructed from two cross-coupled transistors operating as “ON-OFF” transistor switches. In each of the two states, one of the transistors is cut-off while the other transistor is in saturation, this means that the bistable circuit is capable of remaining indefinitely in either stable state.
To change the bistable over from one state to the other, the bistable circuit requires a suitable trigger pulse and to go through a full cycle, two triggering pulses, one for each stage are required. Its more common name or term of “flip-flop” relates to the actual operation of the device, as it “flips” into one logic state, remains there and then changes or “flops” back into its first original state.
1.2 AIM / OBJECTIVE OF THE PROJECT
The main aim of the work is to design a Clock pulse generation circuit that can be flipped from one state to the other by an external trigger pulse. The objectives of the work are:
- To build the prototype of the system
- To study and understand the working principle of a bistable multivibrator
1.3 SCOPE OF THE PROJECT
The scope of this work covers building a bistable multivibrator which is a circuit stays in any one of the two stable states. The system was built using 555 timer as the heart of the circuit.
1.4 SIGNIFICANACE OF THE PROJECT
The advantages of using a Bistable Multivibrator are as follows −
- Stores the previous output unless disturbed.
- Circuit design is simple
1.5 LIMITATION OF THE PROJECT
The drawbacks of a Bistable Multivibrator are as follows −
- Two kinds of trigger pulses are required.
- A bit costlier than other Multivibrators.
1.6 APPLICATIONS OF THE PROJECT
Bistable Multivibrators are used in applications such as pulse generation and digital operations like counting and storing of binary information.
1.7 DEFINITION OF TERMS
The following list are terms associated with a timing pulse or waveform.
- Active HIGH – if the state change occurs from a “LOW” to a “HIGH” at the clock’s pulse rising edge or during the clock width.
- Active LOW – if the state change occurs from a “HIGH” to a “LOW” at the clock’s pulses falling edge.
- Duty Cycle – this is the ratio of the clock width to the clock period.
- Clock Width – this is the time during which the value of the clock signal is equal to a logic “1”, or HIGH.
- Clock Period – this is the time between successive transitions in the same direction, ie, between two rising or two falling edges.
- Clock Frequency – the clock frequency is the reciprocal of the clock period, frequency = 1/clock period. ( ƒ = 1/T ).
1.8 METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:
- Study of the previous work on the project so as to improve it efficiency.
- Draw a block diagram.
- Test for continuity of components and devices,
- Design and calculation for the device was carried out.
- Studying of various component used in circuit.
- Construction of the circuit.
- Finally, the whole device was cased and final test was carried out.
1.9 PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a bistable multivibrator" is also available. Order full work to download. Chapter two of "design and construction of a bistable multivibrator" consists of the literature review. In this chapter all the related work on "design and construction of a bistable multivibrator" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a bistable multivibrator" is available. Order full work to download. Chapter three of "design and construction of a bistable multivibrator" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a bistable multivibrator" is available. Order full work to download. Chapter four of "design and construction of a bistable multivibrator" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of a bistable multivibrator" is available. Order full work to download. Chapter five of "design and construction of a bistable multivibrator" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
