USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a car fighting robots with robotic arm". Please, sit back and study the below research material carefully. This project topic ( design and construction of a car fighting robots with robotic arm) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a car fighting robots with robotic arm" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a car fighting robots with robotic arm" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN AND CONSTRUCTION OF A CAR FIGHTING ROBOTS WITH ROBOTIC ARM

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of a car fighting robots with robotic arm" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of a car fighting robots with robotic arm" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a car fighting robots with robotic arm" visible for everyone, then the complete material on "design and construction of a car fighting robots with robotic arm" is to be ordered for. Happy viewing!!!

---

Fire-fighting is an important but dangerous occupation. A fire-fighter must be able to reach the situation quickly and safely extinguish the fire, preventing further damage and reduce fatalities. Technology has come to rescue this issue, firefighters and machines are now having more efficient and effective method of firefighting. This paper gives you the design idea of car fighting robot with robotic arm using autonomous operation. The robotic vehicle is loaded with fire extinguisher and a water pump which is controlled over solenoid valve to throw water. The robotic arm and the car will be controlled by a remote control that can pick up human beings to a rescue position. An Arduino UNO is a microcontroller is used for the desired operation. A water tank and fire extinguisher setup along with water pump is mounted on the robot body and its operation is carried out from the microcontroller output through appropriate signal from the sensor. The whole operation is controlled by an Arduino UNO microcontroller. 

TABLE OF CONTENTS

 TITLE PAGE

APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE

• INTRODUCTION
• BACKGROUND OF THE STUDY
• PROBLEM STATEMENT
• AIM OF THE PROJECT
• SCOPE OF THE PROJECT
• APPLICATION OF THE PROJECT
• METHODOLOGY
• PROJECT ORGANISATION

CHAPTER TWO

2.0      LITERATURE REVIEW
2.1      HISTORICAL BACKGROUND OF FIRE EMERGENCY

2.2 REVIEW OF AUTOMATIC FIRE EMERGENCY

2.3  GENERAL OVERVIEW ON ROBOTS

2.4  INFORMATION FLOW BETWEEN ROBOT AND HUMAN

2.5  ROBOTICS APPLICATION IN THE CONSTRUCTION INDUSTRY

2.6  FOUR TYPES OF ROBOTS IN THE CONSTRUCTION INDUSTRY

2.8  THE ELEMENTS OF ROBOTICS

2.9  CUSTOM ROBOT DESIGN CONSIDERATIONS

2.10  REVIEW OF FIRE EXTINGUISHER ROBOT

2.11  ROBOTIC ARM

CHAPTER THREE

3.0      METHODOLOGY

3.1      SYSTEM BLOCK DIAGRAM
3.2      FABRICATION OF MECHANICAL COMPONENTS
3.3      CONTROL AND SENSOR UNIT
3.4      WORKING PRINCIPLE
3.5      HARDWARE  DESCRPTION
3.6      SOFTWARE USED
3.7      PROGRAM CODE

CHAPTER FOUR
RESULT ANALYSIS
4.0      RESULT ANALYSIS
4.1      STUDY OF PERFORMANCE
4.2      RESULTS AND DISCUSSION
CHAPTER FIVE     
5.0      CONCLUSION
5.1      RECOMMENDATION
5.2      REFERENCES 

CHAPTER ONE
1.0                                                      INTRODUCTION
1.1                                       BACKGROUND OF THE STUDY
Most of the fire accidents occurring in industries like nuclear power plants, petroleum refineries, gas tanks, chemical factories and other large-scale fire industries resulting in quite serious consequences. Fire-fighting is an important but dangerous occupation. A fire-fighter must be able to get to a fire quickly and safely extinguish the fire, preventing further damage and reduce fatalities. Technology has finally bridged the gap between fire fighting and machines allowing for a more efficient and effective method of fire fighting. Robots designed to find a fire, before it rages out of control, could one day work with fire fighters greatly reducing the risk of injury to victims. Our world is currently facing the global warming whereby the average temperature of our earth atmosphere and oceans is increasing year by year. Studies shows that our earth mean surface temperature has increased about 0.8C which about two-third of increase occurring since 1980. The global warming of the earth may lead to more forest fire and fire disaster occur as everything gets more flammable due to the high temperature of our earth atmosphere. Therefore, fire extinguishing robot is needed to reduce all the damage cause by natural or human made fire disaster.
With the advancement in the field of Robotics, human intervention is becoming less every day and robots are used widely for purpose of safety. This project integrates auto technology for autonomous operation and uses Arduino microcontroller.
Sometimes it is almost impossible to intervene in a these situations without the help of robot. Because robot has some size and sensing advantages that human lacks of. It is not feasible to appoint a person to patrol for accidental fire where a robot can do the patrolling [1]. So a robot is made to patrol for fire detection and early warning in domestic, industrial and  environmental cases [2-5].
This robot may be used in industrial environment and even in household areas where there is more probability of occurring accidental fire [6-8]. Different sensors are used and fusion of their performances is ensured by an intelligent algorithm in Arduino computing platform or by soft computing techniques [9-10]. Su et al. [11] made an automatic fire detection system using Adaptive Fusion Algorithm (AFA). Multisensor Fire Detection System (MSFDS) along  with  Visual  Basic  to  receive  information  was  used  and  a general interface for supervised computer was designed in his study. Viguria et al. [12] built an aerial/ground robot team applied to fire detection. They used a disturbed market based algorithm, called S+T and coordinated in between aerial and ground vehicles. Their simulations showed that if the number of services increased, communication and energy requirement would also increase. Khoon et al. [13] described the development of an Autonomous Fire Fighting Mobile Platform (AFFMP) that is equipped with the basic fighting equipment that can patrol through the hazardous site via a guiding track with the aim of early detection for fire. They used  flame sensor, motor driver circuitry and LDR sensor and kept the extinguishing as simple as possible. For early warning, a vision sensor based fire detection method is proposed by Ko et al. [14]. They developed an AVM classifier for fire pixel verification.
Kim et al. [15] made a portable fire evacuation guide robot system and demonstrated that robot system can be thrown into a fire to gather information, locate displaced people and evacuate them. They designed the robot with aluminum compound metal for thermal resistance with waterproofing and an impact distribution frame for impact resistance. White et al. [16] developed a vehicle mounted fire fighting system and included a series of flame and heat retardant coverings placed on all exposed parts of the system to prevent damage from exposure to extreme heat.
Our effort is to develop an autonomous fire fighter robot which is constructed by locally available fire resistant and water-proof materials and performs on an arduino based fire detection and extinguishment algorithm. The robot is also fabricated so that it can save itself from fire by keeping safe distance from the source. At different distances from the fire and at different day time, the performance of the robot is evaluated by performing sensitivity tests on the sensors taking serial monitor readings in Arduino.

Therefore, Arduino based fire fighting Robot is designed to control fire through a robotic vehicle. The put forward vehicle has a water jet spray which is capable of sprinkling water. The sprinkler can be moved in all four directions. The arrival of new high-speed technology provided realistic opportunity for new robot controls and realization of new methods of control theory. The main controlling devices of the whole system are Microcontrollers, smoke or fire sensor, water jet spray, DC motors and buzzer are interfaced to Microcontroller.

1.2                                       PROBLEM STATEMENT
Detecting fire and extinguishing is a hazardous job for a fire extinguisher, it often risks the life of that person. This project aims in giving a technical solution to the mentioned problem. A car fighting robot is a mechanical design that is capable of carrying out a complex series of actions automatically, especially one programmable by a computer. The device has a fire extinguishing unit added on to it and robotic arm. This robot is controlled using a smoke sensor its movement and reaching the fire, the flame sensor detects the fire and gives the further signal to the extinguisher units to trigger the pump and spray the water.

1.3                                AIM AND OBJECTIVES OF THE STUDY

The main aim of this work is to built a car fighting robot that is controlled using a smoke sensor. The flame sensor detects the fire and gives the further signal to the extinguisher units to trigger the pump and spray the water. The objectives of the study are:

To save lives and properties

To respond to fire emergency in a safe method

To build a robot car with fire extinguisher and robotic arm

1.4                                    APPLICATIONS OF THE PROJECT

• It is used in hazardous places.
• Useful in controlling fire at extreme places where human being cannot reach

1.5                                                 SCOPE OF THE PROJECT
Here, a fire fighter robot is fabricated providing extinguishment platform. There is about 1 liter water reserving capacity. An arduino based simple algorithm is used for detection of fire and measurement of distance from fire source while the robot is on its way to extinguish fire. When the fire is detected and the robot is at a distance near to fire, a centrifugal pump is used to throw water for extinguishment purpose. A water spreader is used for effective extinguishing. It is seen that velocity of water is greatly reduced due to the use of water spreader. Two sensors: LM35 and Arduino Flame Sensors are used to detect the fire and distances on its way towards fire. Sensitivity of these sensors at different day times and distances is tested through analog reading of the serial monitor. The  car with an arm the sensor will activate immediately it see  fire I start boiling water with an alarm. The robotic arm and the car will be controlled by a remote control that can pick up human beings to a rescue position

1.6                                             RESEARCH METHODOLOGY
In the course of carrying this study, numerous sources were used which most of them are by visiting libraries, consulting journal and news papers and online research which Google was the major source that was used.

1.7                                     PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work,   chapter two presents the literature review of the study,  chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a car fighting robots with robotic arm" is also available. Order full work to download. Chapter two of "design and construction of a car fighting robots with robotic arm" consists of the literature review. In this chapter all the related work on "design and construction of a car fighting robots with robotic arm" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of a car fighting robots with robotic arm" is available. Order full work to download. Chapter three of "design and construction of a car fighting robots with robotic arm" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a car fighting robots with robotic arm" is available. Order full work to download. Chapter four of "design and construction of a car fighting robots with robotic arm" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of a car fighting robots with robotic arm" is available. Order full work to download. Chapter five of "design and construction of a car fighting robots with robotic arm" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: