USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a clap activated switch using 555 timer and cd 4017 ". Please, sit back and study the below research material carefully. This project topic ( design and construction of a clap activated switch using 555 timer and cd 4017 ) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a clap activated switch using 555 timer and cd 4017 " project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a clap activated switch using 555 timer and cd 4017 " research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN AND CONSTRUCTION OF A CLAP ACTIVATED SWITCH USING 555 TIMER AND CD 4017

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of a clap activated switch using 555 timer and cd 4017 " by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of a clap activated switch using 555 timer and cd 4017 " research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a clap activated switch using 555 timer and cd 4017 " visible for everyone, then the complete material on "design and construction of a clap activated switch using 555 timer and cd 4017 " is to be ordered for. Happy viewing!!!

---

Sensitive Clap activated switch is an electronics device that can switch on & off a light, Fan, Radio or any other appliance by the sound of clap. 
This is the system of a very sensitive clap switch. It switches ON/OFF a White LED or electrical appliances through claps. The circuit can sense the sound of claps from a distance of 1-2 meters. Condenser Mic picks up sound vibrations caused by the clap. The main component of this clap switch circuit is the Electric Condenser Mic, which has been used as a sound sensor. Condenser Mic basically converts sound energy into electrical energy, that in turns the lamp ON, through a Transistor. 

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT

CHAPTER ONE
1.0      INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

• PROBLEM STATEMENT
• PROJECT MOTIVATION
• AIM / OBJECTIVE OF THE PROJECT
• SCOPE OF THE PROJECT
• SIGNIFICANCE OF THE PROJECT
• ADVANTAGES OF THE PROJECT
• APPLICATION OF THE PROJECT
• METHODOLOGY
• PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

• REVIEW OF VOICE COMMAND DEVICE
• OVERVIEW OF CLAPPING
• REVIEW OF MAJOR COMPONENTS USED

CHAPTER THREE
3.0     CONSTRUCTION METHODOLOGY
3.1      BLOCK DIAGRAM
3.3      CIRCUIT DIAGRAM
3.4      SYSTEM OPERATION
3.5      COMPONENTS USED
3.6      CIRCUIT DESCRIPTION
3.7      CIRCUIT WORKING PRINCIPLE
3.8      12V REGULATED POWER SUPPLY

CHAPTER FOUR
TEST AND RESULT ANALYSIS

• CONSTRUCTION PROCEDURE
• CASING AND PACKAGING
• TESTING OF SYSTEM OPERATION
• CONSTRUCTION TESTING PROCEDURE
• MAINTENANCE OF THE SYSTEM

CHAPTER FIVE
5.0      CONCLUSION, RECOMMENDATION AND REFERENCES

• CONCLUSION
• RECOMMENDATION
• REFERENCES 

CHAPTER ONE
1.0 INTRODUCTION

•                                         PROJECT BACKGROUND

In the present modern world, switching circuits have become an indispensible part of our life. Right from your mobile phone to the various security systems, they can be seen everywhere. Even the horn of your motor car is a kind of switch used to warn people and vehicles in front of its presence. The sole purpose of an switch is to activate or deactivate a device. They may be in the form of a visual indicator, for example a flashing light, but switching circuit in the form of an audible tone or siren is more widely accepted as it is able to wake up even the unaware and the oblivious.
This work is on sound activated switch. Clap activation or deactivation switching is all about automating real life devices using clap signals.
The word “switch” is a very common name found in almost all aspects electrical/electronic engineering. Switches can be found in information technology computers, telecommunications, power electronics, power systems, instrumentation etc.
They have been defined by various people or organizations in different ways. Some of the definitions of switches are listed below;

• As a device that is used to break or stop the flow of charges in a circuit.
• As a device used to connect two or more computers together
• A device used to interrupt the flow of electrons in a circuit.

All the above definitions are correct, but for this project we are going to define a switch as a device which can be used to control the action of an electrical load, by allowing or obstructing the flow of the electrical signal sent it.

1.2  PROBLEM STATEMENT

• In the industries like the petroleum or chemical industries, some production processes have been started or stopped due to accidental switching of machinery leading to injury or death. This can cause financial strain on a company.
• In the radioactive process, manual switching poses great health hazards to the operator due to the side effects of exposure to the radioactive elements.
• Manual switching is an uphill task for the disabled/ impaired and aged People due to movement constraints.
• Sometimes, we are victims of electric shocks from our devices when we try to switch them ON/OFF due to leaking currents from the electric switches.
  
  1.3   PROJECT MOTIVATION

The motivation of this project is to fulfil the following;

• To eliminate the stress in walking from end to end, or room to room of a building to switch devices ON/OFF.
• The provision of remote switching helps to safe guard operators and equipment.
• To ensure a reliable and safe method of switching domestic and industrial devices.
  
  1.4       OBJECTIVE OF STUDY

The objective of this project is to construct a device which can be switched on and off using clap signals. 

1.5                                                          SCOPE OF THE PROJECT
The scope of this work is defined by the following points
I.  The switching interface in this project is of the general purpose type as it is not restricted to only one type of load.
          II.      The clap signal accepted by the computer, will not be limited to just one person.
       III.      It will not be limited to low voltage, low current AC/DC applications of 240V maximum operating voltage.
          V.      The type of control this project employs is the simple ON/OFF control of devices

1.6                                        SIGNIFICANCE OF PROJECT
This project’s completion will be of great benefit to our ever demanding and developing society. Some of these benefits include;
    I.      Accidental switching of devices will be reduced to a minimum in our industries and homes.
   II.      Walking from point to point to switch switches will be a thing of the past.
  III.      This project will possess the LOCK and UNLOCK functions, which will prevent unintentional switching any time the user wishes
       VI.      Our industries and homes will become friendlier to disabled people.

1.7                                      ADVANTAGES OF THE PROJECT

1. Energy efficient
2. Low cost and reliable circuit
3. Complete elimination of manpower
4. High Accuracy

1.8                                    APPLICATIONS OF THE PROJECT

The major advantage of a clap switch is that you can turn something (e.g a lamp) on and off from any location in the room (e.g while lying in bed) simply by clapping your hands.
The primary application involves an elderly or mobility- impaired person. A clap switch is generally used for a light, television, radio or similar electronic device that the person will want to turn on/off from bed.

1.9                                         METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

• Study of the previous work on the project so as to improve it efficiency.
• Draw a block diagram.
• Test for continuity of components and devices,
• Design and calculation for the device was carried out.
• Studying of various component used in circuit.
• Construction of the circuit was carried out.
• Finally, the whole device was cased and final test was carried out.

1.10                                                      PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work,   chapter two presents the literature review of the study,  chapter three describes the methods applied,  chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a clap activated switch using 555 timer and cd 4017 " is also available. Order full work to download. Chapter two of "design and construction of a clap activated switch using 555 timer and cd 4017 " consists of the literature review. In this chapter all the related work on "design and construction of a clap activated switch using 555 timer and cd 4017 " was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of a clap activated switch using 555 timer and cd 4017 " is available. Order full work to download. Chapter three of "design and construction of a clap activated switch using 555 timer and cd 4017 " consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a clap activated switch using 555 timer and cd 4017 " is available. Order full work to download. Chapter four of "design and construction of a clap activated switch using 555 timer and cd 4017 " consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of a clap activated switch using 555 timer and cd 4017 " is available. Order full work to download. Chapter five of "design and construction of a clap activated switch using 555 timer and cd 4017 " consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

Visit the link below to see our recent works, and SUBSCRIBE to receive notification for our electronics teachings and practicals.
https://www.youtube.com/channel/UChY9Z1-egigJbYjYnapd0nw

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: