USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a dc motor". Please, sit back and study the below research material carefully. This project topic ("design and construction of a dc motor") have complete 5(five) Chapters . Each Project Material include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this"design and construction of a dc motor" project research material is to reduce the stress of moving from one school library to another all in the name of searching for"design and construction of a dc motor"research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN AND CONSTRUCTION OF A DC MOTOR

BY

---
EE/H2007/01430
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
SCHOOL OF ENGINEERING
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work,"design and construction of a dc motor" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.

By
Engr. ---                                                     Engr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
 Engr. ---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work"design and construction of a dc motor" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages ( use it to develop yours), Abstract and Chapter one of "design and construction of a dc motor"visible for everyone, then the complete material on"design and construction of a dc motor" is to be ordered for. Happy viewing!!!

---

A DC motor is any of a class of rotary electrical machines that converts direct current electrical energy into mechanical energy. The most common types rely on the forces produced by magnetic fields. Nearly all types of DC motors have some internal mechanism, either electromechanical or electronic, to periodically change the direction of current flow in part of the motor.
In this paper the design of a 1KW dc motor with its all specific parts are done. What consists stator part like yoke, pole shoe, pole core, brushes, commutator, field winding etc. The design of rotating part like armature, armature winding, no of slots in armature windings are also explained in this paper for 1 KW dc motor. It also includes specific parameters used for designing 1KW dc motor like stator length, no of poles, no of turns in field winding. Copper Material with its mechanical strength is explained for making the field winding and armature winding. The cast iron is used as the protecting material for motor. Output questions like maximum speed of motor, torque generated for the motor are also calculated on the basis of these parameters.

 

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

• AIM OF THE PROJECT
• OBJECTIVE OF THE PROJECT
• ADVANTAGES OF THE PROJECT
• DISADVANTAGES OF THE PROJECT
• APPLICATION OF THE PROJECT

CHAPTER TWO
LITERATURE REVIEW

• OVERVIEW OF THE STUDY
• REVIEW OF DIFFERENT TYPES OF DC MOTOR
• DC MOTOR CONNECTION
• HISTORICAL BACKGROUND OF THE STUDY

CHAPTER THREE
SYSTEM DESIGN METHODOLOGY

• COMPONENTS DC MOTOR
• PROPERTIES OF A DC MOTOR
• WORKING PRINCIPLE OF A DC MOTOR
• THEORY OF OPERATION
• DESIGN PROCEDURE
• EQUATIONS OF DC MOTOR

CHAPTER FOUR
4.1 TESTING AND MAINTENANCE GUIDE
CHAPTER FIVE

• CONCLUSION
• REFERENCES

 

CHAPTER ONE
1.0                                                        INTRODUCTION
A DC motor is a mechanically commutated electric motor powered from direct current (DC). The stator is stationary in space by definition and therefore the current in the rotor is switched by the commutator to also be stationary in space. This is how the relative angle between the stator and rotor magnetic flux is maintained near 90 degrees, which generates the maximum torque.
DC motors have a rotating armature winding (winding in which a voltage is induced) but non-rotating armature magnetic field and a static field winding (winding that produce the main magnetic flux) or permanent magnet. Different connections of the field and armature winding provide different inherent speed/torque regulation characteristics. The speed of a DC motor can be controlled by changing the voltage applied to the armature or by changing the field current. The introduction of variable resistance in the armature circuit or field circuit allowed speed control. Modern DC motors are often controlled by power electronics systems called DC drives.
DC motors are the most common type of motors used in robotics. DC motors appear in a large variety of shapes and sizes: permanent magnet iron core, permanent magnet ironless rotor, permanent magnet brushless, wound field series connected, wound field shunt connected, wound field compound connected, variable reluctance stepper, permanent magnet stepper, and hybrid stepper motors.
Another way of DC motor characterization is brush type and brushless DC motors. This characterization refers to the manner of commutation used in motor, which converts direct current from the batteries into the alternating current required to generate motor action. If this commutation is performed mechanically with brushes, the commutator segments at the ends of the rotating rotor col physically slide against the stationary brushes that are connected to the terminals of motor. These type of motors are brush type DC motors. For brushless motors, the DC is converted into AC in the rotor electronically with position sensors and a microprocessor controller, so no brushes are needed.

1.2                                                   AIM OF THE PROJECT
The aim of this work is to design a motor that is powered with direct current (dc) source.

1.3                                             OBJECTIVE OF THE PROJECT
After studying this chapter, you will be able to:

• Construct a dc motor.
• Explain the operation of electric motors in general and DC motors in particular
• Explain the principles upon which DC motors operate Describe the construction of DC motors Discuss the different types of DC motors and their operating characteristics
• Describe basic motor maintenance procedures
• Basic Motor  operation

1.4                                           ADVANTAGES OF DC MOTORS

• Speed control over a wide range both above and below the rated speed: The attractive feature of the dc motor is that it offers the wide range of speed control both above and below the rated speeds. This can be achieved in dc shunt motors by methods such as armature control method and field control method. This is one of the main applications in which dc motors are widely used in fine speed applications such as in rolling mills and in paper mills.
• High starting torque: dc series motors are termed as best suited drives for electrical traction applications used for driving heavy loads in starting conditions. DC series motors will have a staring torque as high as 500% compared to normal operating torque. Therefore dc series motors are used in the applications such as in electric trains and cranes.
• Accurate steep less speed with constant torque: Constant torque drives is one such the drives will have motor shaft torque constant over a given speed range. In such drives shaft power varies with speed.
• Quick starting, stopping, reversing and acceleration
• Free from harmonics, reactive power consumption and many factors which makes dc motors more advantageous compared to ac induction motors.

1.5                                        DISADVANTAGES OF DC MOTORS

• High initial cost
• Increased operation and maintenance cost due to presence of commutator and brush gear
• Cannot operate in explosive and hazard conditions due to sparking occur at brush ( risk in commutation failure)

1.6                                         APPLICATIONS OF A DC MOTOR
In depends on the type of DC motor, which applications are ideal. Generally speaking, the following applications are common.

• Cranes
• Conveyors
• Pumps
• Fans
• Machine tools
• Air compressors
• Toys
• Motor starters in cars
• robots

1.7                                        PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this study. In this chapter, the background, significance, scope, objective, the need (benefit),  limitation and problem, advantages of this work was discussed.
Chapter two is on literature review of the study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.

---

CHAPTER TWO: The complete chapter two of "design and construction of a dc motor"is available. Order full work to download. Chapter two of "design and construction of a dc motor"consist of the literature review. In this chapter all the related work on "design and construction of a dc motor" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of a dc motor" is available. Order full work to download. Chapter three of "design and construction of a dc motor"consist of the methodology "design and construction of a dc motor". In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a dc motor" is available. Order full work to download. Chapter four of"design and construction of a dc motor"consist of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and construction of a dc motor" is available. Order full work to download. Chapter five of "design and construction of a dc motor"consist of conclusion, recommendation and references of "design and construction of a dc motor".

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research for your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view more our related construction (or design) pics

---

For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.

---

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.