DESIGN AND CONSTRUCTION OF A DIGITAL ALARM CLOCK USING 8051 MICROCONTROLLER (AT89C51)
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)". Please, sit back and study the below research material carefully. This project topic (design and construction of a digital alarm clock using 8051 microcontroller (at89c51)) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of ""design and construction of a digital alarm clock using 8051 microcontroller (at89c51) visible for everyone, then the complete material on "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)" is to be ordered for. Happy viewing!!!
This work is on digital alarm clock using microcontroller. An alarm clock is a clock that indicates a pre-set time by producing sound at that time. This functionality of digital clock is used to awaken people or remind them of something. In this work, an extra switch is provided to set the alarm. While the alarm is set, the clock time does not stop and runs in the background. The circuit is build around 8051 microcontroller (AT89C51) and uses LCD to display time.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGMENT
ABSTRACT
TABLE OF CONTENTS
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
1.2 PURPOSE OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 ADVANTAGES OF DIGITAL ALARM CLOCK
1.6 LIMITATION OF THE PROJECT
1.7 APPLICATION OF THE PROJECT
1.9 METHODOLOGY
1.10 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- HISTORICAL BACKGROUND OF THE STUDY
- REVIEW OF DIFFERENT TYPES OF ALARM
CHAPTER THREE
3.0 METHODOLOGY
- BASIC OF THE SYSTEM
- CIRCUIT DIAGRAM
- CIRCUIT COMPONENTS
- SYSTEM DESCRIPTION AND OPERATION
- POWER SUPPLY UNIT
- DESCRIPTION OF COMPONENTS USED
CHAPTER FOUR
4.0 RESULT ANALYSIS
- CONSTRUCTION PROCEDURE
- CASING AND PACKAGING
- ASSEMBLING SECTION
- SYSTEM TESTING
CHAPTER FIVE
- CONCLUSION AND RECOMMENDATION
- CONCLUSION
-
RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
An alarm clock is a clock that is designed to make a sound, or some other signal, at a specific time. The primary utility of these clocks is to awaken people from their night's sleep or short naps; they are sometimes used for other reminders as well. Most use sound; some use light or vibration. Some have sensors to identify when a person is in a light stage of sleep, in order to avoid waking someone who is deeply asleep, which causes tiredness, even if the person has had adequate sleep. To stop the sound or light, a button or handle on the clock is pressed; most clocks automatically stop the alarm if left unattended long enough. A classic analog alarm clock has an extra hand or inset dial that is used to specify the time at which to activate the alarm. Alarm clocks are also found on mobile phones and watches.
Traditional mechanical alarm clocks have one or two bells that ring by means of a mainspring that powers a gear to propel a hammer back and forth between the two bells or between the interior sides of a single bell. In some models, the back encasement of the clock itself acts as the bell. In an electric bell-style alarm clock, the bell is rung by an electromagnetic circuit and armature that turns the circuit on and off repeatedly.
Digital alarm clocks can make other noises. Simple battery-powered alarm clocks make a loud buzzing or beeping sound to wake a sleeper, while novelty alarm clocks can speak, laugh, sing, or play sounds from nature.
Some alarm clocks have radios that can be set to start playing at specified times, and are known as clock radios. Some alarm clocks can set multiple alarms, a useful feature for couples who have different waking up schedules. A progressive alarm clock, still new in the market, can have different alarms for different times and even play music of your choice. Most modern televisions, mobile phones and digital watches have alarm clock functions to turn on or make sounds at a specific time.
Digital alarm clocks display a numeric representation of time. Two numeric display formats are commonly used on digital alarm clocks. This digital clock uses LCD to display the set time.
- PURPOSE OF THE PROJECT
Alarm Clocks are in homes, offices and many other places; smaller ones (watches) are carried on the wrist or in a pocket; larger ones are in public places, e.g. a railway station or church.
The primary purpose of a alarm clock is to indicates a pre-set time by producing sound at that time. Clocks may also have the facility to make a loud alert signal at a specified time, typically to waken a sleeper at a preset time; they are referred to as alarm clocks. The alarm may start at a low volume and become louder, or have the facility to be switched off for a few minutes then resume. Alarm clocks with visible indicators are sometimes used to indicate to children too young to read the time that the time for sleep has finished; they are sometimes called training clocks.
A clock mechanism may be used to control a device according to time, e.g. a central heating system, a VCR, or a time bomb. Such mechanisms are usually called timers. Clock mechanisms are also used to drive devices such as solar trackers and astronomical telescopes, which have to turn at accurately controlled speeds to counteract the rotation of the Earth.
1.3 OBJECTIVE OF THE PROJECT
The objective of this project is to construct a device that indicates a pre-set time by producing sound at that time. This functionality of digital clock is used to awaken people or remind them of something. This work displays time on a 16x2 LCD module. The LCD is interfaced with 8051 microcontroller (AT89C51)
1.4 SIGNIFICANCE OF THE PROJECT
You truly cannot be an organized human being unless you use a good timing system. Alarm clock can help one to keep all of their appointments, activities
One of the most beautiful things about digital clock is that they can be synced, so you can have your clock on your smart phone, your tablet, your laptop, as well as it can sync to your husband’s electronic clock and your kids’ clock. So no matter where you are- you can easily look up and see what your current appointments are for any given day. And the important people in your life can know the latest schedule and commitments too- without coming home and consulting the kitchen wall.
1.5 ADVANTAGES OF DIGITAL ALARM CLOCK
- Even if there is power failure, this clock can be powered with battery. After a reset, battery change or power failure, these clocks without a backup battery.
- Simplicity of the system.
- Accuracy of the system.
1.5 APPLICATIONS
Because digital alarm clock is very small and inexpensive devices that enhance the popularity of product designs, they are often incorporated into all kinds of devices such as
• Cars
• schools
• offices
- Used at homes. E.T.C
1.6 LIMITATION OF THE PROJECT
One has to reset the time whenever the alarm is needed. Sometimes the alarm can be annoying when trying to sleep.
1.7 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to a digital alarm clock. In this chapter, the background, significance, objective limitation and problem of a digital alarm clock were discussed.
Chapter two is on literature review of a digital alarm clock. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)" is also available. Order full work to download. Chapter two of "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)" consists of the literature review. In this chapter all the related works on ""design and construction of a digital alarm clock using 8051 microcontroller (at89c51) were reviewed.
CHAPTER THREE: The complete chapter three of ""design and construction of a digital alarm clock using 8051 microcontroller (at89c51) is available. Order full work to download. Chapter three of "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of ""design and construction of a digital alarm clock using 8051 microcontroller (at89c51) is available. Order full work to download. Chapter four of ""design and construction of a digital alarm clock using 8051 microcontroller (at89c51) consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)" is available. Order full work to download. Chapter five of "design and construction of a digital alarm clock using 8051 microcontroller (at89c51)" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
Visit the link below to see our recent works, and SUBSCRIBE to receive notification for our electronics teachings and practicals.
https://www.youtube.com/channel/UChY9Z1-egigJbYjYnapd0nw
For more information contact us through any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA: