USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a digital school bell using microcontroller and timetable display". Please, sit back and study the below research material carefully. This project topic "design and construction of a digital school bell using microcontroller and timetable display" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a digital school bell using microcontroller and timetable display" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a digital school bell using microcontroller and timetable display" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of a digital school bell using microcontroller and timetable display" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of a digital school bell using microcontroller and timetable display" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a digital school bell using microcontroller and timetable display" visible for everyone, then the complete material on "design and construction of a digital school bell using microcontroller and timetable display" is to be ordered for. Happy viewing!!!

---

Now a day’s many school/college bells are manually operated. Hence there is a huge demand of accuracy. In market there are many digital clocks available with bells but rings only at specific time and cannot stop after specific time. Here a new and inexpensive design is being presented. The benefit of this design is that the bell rings at the start of each period without any human intervention to a great degree of accuracy and hence takes over the manual task of switching on/off the college bell with respect to time. It uses Real Time Clock (DS1307) which tracks the real time. The scheduled time results are related with that of a clock, conversely, some drift is noticed, which is irrelevant. The microcontroller ATmega2560 is used to control all the functions, it gets the time through the keypad and stores it in its memory. When this programmed time equals the real time then the bell is switched on via a relay for a predetermined time. The bell ringing time can be edited at any time, so that it can be reused again and again at normal class timings as well as at exam times. Also it can be made password protected so that no unintended person can operate this system except for the operator. For this a microcontroller has to be programmed using the C language or assembly language for controlling the circuit.
KEYWORDS: DS 1307RTC, Relay, ATmega2560Microcontroller, & LCD

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0      INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

• PROBLEM STATEMENT
• AIM AND OBJECTIVES OF THE PROJECT
• SCOPE OF THE PROJECT
• ADVANTAGES OF THE PROJECT
• APPLICATION OF THE PROJECT
• PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

• OVERVIEW OF SCHOOL BELL
• REVIEW OF BELL RINGER
• HISTORICAL BACKCKGOUND OF SCHOOL BELL
• DESCRIPTION OF TIME MANAGEMENT
• THE IMPORTANCE OF TIME MANAGEMENT IN LECTURE
• REVIEW OF RELATED STUDIES

CHAPTER THREE
3.0     METHODOLOGY
3.1      SYSTEM BLOCK DIAGRAM
3.2      SYSTEM DESCRIPTION
3.3      CIRCUIT DIAGRAM
3.4      HARDWARE DESCRIPTION
3.5      SOFTWARE DESCRIPTION
3.6      POWER SUPPLY UNIT
CHAPTER FOUR
4.0      TESTING AND RESULTS

• CONSTRUCTION PROCEDURE AND TESTING
• INSTALLATION OF THE COMPLET DESIGN 
• ASSEMBLING OF SECTIONS
• TESTING OF SYSTEM OPERATION
• RESULT AND DISCUSSION

CHAPTER FIVE

• CONCLUSION
• RECOMMENDATION
• REFERENCES

 

CHAPTER ONE

INTRODUCTION

1.1                                             background of the study

In today’s life, everyone gives importance to time. Time does not wait for anybody. Everything should be performed in time and with accuracy. Now a day’s school/college bells are operated manually. Hence there is a big question of accuracy. Also there is necessity of manpower and money. Hence here we have presented a system, which saves our manpower and money and also give highest accuracy. A bell is a percussion instrument used in schools and colleges that indicates the students when it is time to go to the class in the morning and when it is time to change classes during the day. No other instrument can do such a work. So it is an important instrument in both primary and secondary schools and even in the industries and other businesses where the bell timer plays a critical role throughout the day. Clock towers can be heard over long distance which was especially important in the time when clocks were too expensive for widespread use. And also due to literacy awareness the number of colleges, schools and institutions are rapidly increasing. At present bells for periods in schools are operated manually. After every class, one employee is engaged into operating the bell. Automatic college bell helps us to avoid this. This design takes over the task of ringing the bell in colleges as the bell would ring automatically at the schedule time. It has a Real Time Clock(DS1307) which tracks over the real time. When this time equals to the bell ringing time, then the relay for the bell is switched on. The real time clock is displayed on LCD display. This is very wonderful design to control the working of college bell.

1.2    Problem Statement
School bells have been a critical part of all our childhoods which is managed, monitored, timed and always ringed by human being. As a result of the human beings’ control timing, monitoring and ringing can be wrong-timed. But with the advent of technology as many things have been digitalized the school bell has experienced technological advanced. Digital school timetable was built to overcome the challenges seen in our conventional school bell by providing the following functions:

• Storing entire day timetable with timings
• Sounding buzzer at the end of every period
• Displaying the name of current and next period
• Ability to reprogram the board at any time

1.3      Aim and objectives of the study
The main aim of this work is to build a digital school bell using microcontroller and timetable display. The objectives of the project are:

• To build the system prototype.
• To Store entire day timetable with timings
• To ring the school at the right time

1.4      Scope of the study
The scope of this work covers building a digital school bell and schedule time display system using microcontroller using Inbuilt Real Time Clock (DS1307 /DS 12C887) which tracks over the Real Time. When this time equals to the Bell Ringing time, then the Relay for the Bell is switched on. The Bell Ringing time can be edited at any Time. The microcontroller was programmed using the C language or assembly language for controlling the circuit.

1.5      Advantages of the Project
i. It is an automation system.
ii. Human errors can be avoided.
iii. Safety is assured.

1.6      Applications of the project
i. It is used in colleges, schools.
ii. Also used in industries.
ii. In railway station and airport.
iv. Digital watches, washing machine, oven.

1.7 Project Organization
The work is organized as follows: chapter one discuss the introductory part of the work,   chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a digital school bell using microcontroller and timetable display" is also available. Order full work to download. Chapter two of "design and construction of a digital school bell using microcontroller and timetable display" consists of the literature review. In this chapter all the related work on "design and construction of a digital school bell using microcontroller and timetable display" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of a digital school bell using microcontroller and timetable display" is available. Order full work to download. Chapter three of "design and construction of a digital school bell using microcontroller and timetable display" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a digital school bell using microcontroller and timetable display" is available. Order full work to download. Chapter four of "design and construction of a digital school bell using microcontroller and timetable display" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and construction of a digital school bell using microcontroller and timetable display" is available. Order full work to download. Chapter five of "design and construction of a digital school bell using microcontroller and timetable display" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: