DESIGN AND CONSTRUCTION OF A DIGITAL VOICE RECORDER AND PLAYBACK
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a digital voice recorder and playback". Please, sit back and study the below research material carefully. This project topic "design and construction of a digital voice recorder and playback" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a digital voice recorder and playback" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a digital voice recorder and playback" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work "design and construction of a digital voice recorder and playback" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a digital voice recorder and playback" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of"design and construction of a digital voice recorder and playback"visible for everyone, then the complete material on "design and construction of a digital voice recorder and playback" is to be ordered for. Happy viewing!!!
Voice recorder and playback system is a made for the purpose of recording those messages and playback which required frequently at some places like platform, train, instruction, mobile, etc. This work is based on IC ISD1700 which is DIP package and 2.4-5 volt operating voltage. It is a multi-message voice record. It can be operated standalone or by microcontroller (SPI) mode. Recording are stored into on-chip flash memory, providing zero power message storage.
TABLE OF CONTENT
COVER PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF PROJECT
- OBJECTIVE OF PROJECT
- APPLICATION OF THE PROJECT
- SCOPE OF THE PROJECT
- PROJECT WORK ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
2.1 OVERVIEW OF SOUND RECORDING AND REPRODUCTION
2.2 HISTORICAL BACKGROUND OF SOUND RECORDING
2.3 OVERVIEW DIGITAL AUDIO
CHAPTER THREE
DESIGN METHODODLOGY
3.1 BLOCK DIAGRAM
3.2 SYSTEM OPERATION
3.3 PIN DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 HOW TO USE THE SYSTEM
3.6 ISD1700DESCRIPTION
3.7 FEATURES OF ISD 1700
3.8 SYSTEM DESIGN PICTURE
CHAPTER FOUR
RESULTS ANALYSIS
- CONSTRUCTION PROCEDURE
- CASING AND PACKAGING
- ASSEMBLING OF SECTIONS
- PACKAGING
- MOUNTING PROCEDURE
- TESTING
- RESULT ANALYSIS
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
In digital recording, audio signals picked up by a microphone or other transducer or video signals picked up by a camera or similar device are converted into a stream of discrete numbers, representing the changes over time in air pressure for audio, and chroma and luminance values for video, then recorded to a storage device. To play back a digital sound recording, the numbers are retrieved and converted back into their original analog waveforms so that they can be heard through a loudspeaker. To play back a digital video recording, the numbers are retrieved and converted back into their original analog waveforms so that they can be viewed on a video monitor, television or other display.
This technology is mostly useful in day to day life, the voice recorders which gets recorded from the wrist watch voice recorder and pen voice recorder can be easily transferred to the computer through the USB key. This allows creating the audio or voicing recorded files of conversations, which can be copied and forwarded easily. These can be placed in some other devices like’s hard disks, CD drives, pen drive and this copied files are easily forward able within few minutes this applications are mostly helpful for students, you can send this conversations as notes to those who has missed their previous classes. This device consumes less amount of power supply.
1.1 BACKGROUND OF THE PROJECT
Sound recording and reproduction is an electrical, mechanical, electronic, or digital inscription and re-creation of sound waves, such as spoken voice, singing, instrumental music, or sound effects. The two main classes of sound recording technology are analog recording and digital recording.
Acoustic analog recording is achieved by a microphone diaphragm that senses changes in atmospheric pressure caused by acoustic sound waves and records them as a mechanical representation of the sound waves on a medium such as a phonograph record (in which a stylus cuts grooves on a record). In magnetic tape recording, the sound waves vibrate the microphone diaphragm and are converted into a varying electric current, which is then converted to a varying magnetic field by an electromagnet, which makes a representation of the sound as magnetized areas on a plastic tape with a magnetic coating on it. Analog sound reproduction is the reverse process, with a bigger loudspeaker diaphragm causing changes to atmospheric pressure to form acoustic sound waves.
Digital recording and reproduction converts the analog sound signal picked up by the microphone to a digital form by the process of sampling. This lets the audio data be stored and transmitted by a wider variety of media. Digital recording stores audio as a series of binary numbers (zeros and ones) representing samples of the amplitude of the audio signal at equal time intervals, at a sample rate high enough to convey all sounds capable of being heard. A digital audio signal must be reconverted to analog form during playback before it is amplified and connected to a loudspeaker to produce sound.
Prior to the development of sound recording, there were mechanical systems, such as wind-up music boxes and, later, player pianos, for encoding and reproducing instrumental music.
1.2 AIM OF THE PROJECT
The main aim of the work is to design a device that records and playback of voice messages. With this device users can leave a voice message for their family or friends whenever you go out, which they can hear by pressing the ‘play’ button.
1.3 OBJECTIVE OF PROJECT
At the end of this work, the student involved will be able to built and operate this device, and a little display of the application shall also be demonstrate by the student.
1.4 SIGNIFICANCE OF THE PROJECT
Digital voice recorders are the solution for busy business people or anyone with a need to record notes, meetings, presentations, lectures, and dictation. For musicians and other professionals, better quality recorders have additional features that, for example, allow them to make high fidelity stereo recordings. Yes, a modern multifunction device such as the iPhone can provide voice recording functionality. However, compared to dedicated voice recorders, multifunction devices can be limited in recording quality, battery life, audio storage capacity, and may lack features like voice activation and index markers.
1.5 APPLICATION OF THE PROJECT
This device can be used in different types of applications such as door bells, railway announcement systems and automatic telephone answering devices.
1.6 SCOPE OF THE PROJECT
This voice recorder and playback system is built around a recording and playback chip that supports voice recording for 16 seconds to 1minute and reproduces it clearly. This work is based on IC ISD1700 which is DIP package and 2.4-5 volt operating voltage. It is a multi-message voice record. It can be operated standalone or by microcontroller (SPI) mode. Recording are stored into on-chip flash memory, providing zero power message storage. IC ISD1700 is a high-quality voice recording and playback IC.
1.7 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this study. In this chapter, the background, significance, objective limitation and problem of the study were discussed.
Chapter two is on literature review of the study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a digital voice recorder and playback" is also available. Order full work to download. Chapter two of "design and construction of a digital voice recorder and playback" consists of the literature review. In this chapter all the related work on "design and construction of a digital voice recorder and playback" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a digital voice recorder and playback" is available. Order full work to download. Chapter three of "design and construction of a digital voice recorder and playback" detector consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a digital voice recorder and playback" is available. Order full work to download. Chapter four of "design and construction of a digital voice recorder and playback" detector consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of a digital voice recorder and playback" is available. Order full work to download. Chapter five of "design and construction of a digital voice recorder and playback" detector consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
