USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a door alarm circuit " Please, sit back and study the below research material carefully. This project topic "design and construction of a door alarm circuit " have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a door alarm circuit " project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a door alarm circuit " research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN AND CONSTRUCTION OF A DOOR ALARM CIRCUIT

BY

---
EE/H2013/01430
DEPARTMENT OF---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of a door alarm circuit " by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.

By
Dr. ---                                           Dr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
Dr. ---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work “design and construction of a door alarm circuit ” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “design and construction of a door alarm circuit ” visible for everyone, then the complete material on “design and construction of a door alarm circuit ” is to be ordered for. Happy viewing!!!

---

The main objective of this project was to ensure a proper security to building against theft or intruder.  This device functions as a major security alarms  used in residential, commercial, industrial, and military properties for protection against burglary (theft) or property damage, as well as personal protection against intruders . It is an electronic device that is connected to the battery or 5v power supply being installed in and gets activated automatically when someone opens a door and it blows an alarm.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0      INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

• OBJECTIVE OF THE PROJECT
• SIGNIFICANCE OF THE PROJECT
• PURPOSE OF THE PROJECT
• APPLICATION OF THE PROJECT
• LIMITATION OF THE PROJECT
• SCOPE OF THE PROJECT
• PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

• REVIEW OF THE STUDY
• REVIEW OF DIFFERENT TYPES OF INTRUDER SENSOR
• OVERVIEW OF HALL EFFECT SENSOR
• REVIEW OF 555 TIMER IC

CHAPTER THREE
3.0     CONSTRUCTION METHODOLOGY
3.1      BLOCK DIAGRAM OF THE SYSTEM
3.2      SYSTEM OPERATION
3.3      CIRCUIT DIAGRAM
3.4      CIRCUIT DESCRIPTION
3.5      POWER SUPPLY UNIT
CHAPTER FOUR
4.0      TESTING AND RESULTS

• CONSTRUCTION PROCEDURE AND TESTING
• INSTALLATION OF THE COMPLET DESIGN 
• ASSEMBLING OF SECTIONS
• TESTING OF SYSTEM OPERATION
• COST ANALYSIS

CHAPTER FIVE

• CONCLUSION
• RECOMMENDATION
• REFERENCE

CHAPTER ONE

1.1                                                       INTRODUCTION

Door circuit with alarm is designed to detect intrusion – unauthorized entry – into a building or area. Security alarms are used in residential, commercial, industrial, and military properties for protection against burglary (theft) or property damage, as well as personal protection against intruders. Car alarms likewise protect vehicles and their contents. Prisons also use security systems for control of inmates.
Some alarm systems serve a single purpose of burglary protection; combination systems provide both fire and intrusion protection. Intrusion alarm systems may also be combined with closed-circuit television surveillance systems to automatically record the activities of intruders, and may interface to access control systems for electrically locked doors. Systems range from small, self-contained noisemakers, to complicated, multi-area systems with computer monitoring and control.
This device protects the door and gives a loud Alarm tone when there is an attempt of theft. This simple door opening alarm using hall sensor produces sound when someone opens the door. The circuit can be installed at a workshop, office or home for security purposes.

1.1                                         BACKGROUND OF THE PROJECT
The need for having home protection has always been there. But in the recent times, considering a dramatic rise in petty crimes like robbery and theft, the need has been more strongly felt to have a fool proof protection of the belongings and the family members. Home security has come a long way in the last few decades. It was in the hands of a guard who manually provided surveillance during nights in the earlier days, but it was not fool proof as it was only normal for him to have momentary lapse of concentration.
The guard was also susceptible to sleep at times. It was then that home alarm system based upon electronic circuits were developed which proved to be highly reliable and were appreciated by the people as they were relieved from constant monitoring of their homes, office or workshop.

1.2                                             OBJECTIVE OF THE PROJECT
The objective of this work is to design a device will automatically indicate when someone opens a door and it blows an alarm. This circuit is used to detect the opening of door.

1.3                                         SIGNIFICANCE OF THE PROJECT

• Saves time for searching door bell switch.
• Saves electricity.
• Enhances security.
• Saves manpower.
• This device can be used to detect when occupants of house left their door open.

1.4                                              PURPOSE OF THE PROJECT
This project proposes the development of security system for form houses and residential houses. 

1.5                                          APPLICATIONS OF THE PROJECT

• The circuit can be used as a door bell by connecting the supply to a switch.
• With some modifications it can be used to produce different sounds.
• It can be used in the office
• Homes
• industry

1.6                                         LIMITATION OF THE PROJECT

• As the applied voltage is 5V, it cannot produce more sound.
• You can only use it for one doors.

1.7                                                 SCOPE OF THE PROJECT
This door opening alarm alerts you of intruders. You simply need to fit a small unit including magnetic switch on each door frame and fix a magnet on the moving door such that the magnet aligns with the reed switch when the door is closed.
A separate unit incorporating the power supply, three LEDs and a buzzer is to be kept by your side inside your room. A three core ribbon cable from this unit goes to each door unit. One core goes to the positive terminal, second to the negative terminal and third to the output of the unit. When the door is closed, the reed switch terminals are shorted and the alarm does not sound.

1.8                       PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this study. In this chapter, the background, significance, objective limitation and problem of this study were discussed.
Chapter two is on literature review of the study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.

CHAPTER TWO: The complete chapter two of “design and construction of a door alarm circuit ” is available. Order full work to download. Chapter two of “design and construction of a door alarm circuit ” consists of the literature review. In this chapter all the related work on “design and construction of a door alarm circuit ” was reviewed.

CHAPTER THREE: The complete chapter three of “design and construction of a door alarm circuit ” is available. Order full work to download. Chapter three of “design and construction of a door alarm circuit ” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of “design and construction of a door alarm circuit ” is available. Order full work to download. Chapter four of “design and construction of a door alarm circuit ” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction of a door alarm circuit ” is available. Order full work to download. Chapter five of “design and construction of a door alarm circuit ” consist of conclusion, recommendation and references.

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.

---

For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com

---

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.