DESIGN AND CONSTRUCTION OF A FIRE (SMOKE) ALARM SYSTEM USING MQ SENSOR
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a fire (smoke) alarm system using mq sensor". Please, sit back and study the below research material carefully. This project topic ( design and construction of a fire (smoke) alarm system using mq sensor) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a fire (smoke) alarm system using mq sensor" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a fire (smoke) alarm system using mq sensor" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF A FIRE (SMOKE) ALARM SYSTEM USING MQ SENSOR
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of a fire (smoke) alarm system using mq sensor" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a fire (smoke) alarm system using mq sensor" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a fire (smoke) alarm system using mq sensor" visible for everyone, then the complete material on "design and construction of a fire (smoke) alarm system using mq sensor" is to be ordered for. Happy viewing!!!
This project is titled design and construction of an automatic fire alarm. Fire alarm detect the presence of smoke during fire accident. An automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is classified as either automatically actuated, manually actuated, or both. Automatic fire alarm systems are intended to notify the building occupants to evacuate in the event of a fire or other emergency, report the event to an off-premises location in order to summon emergency services, and to prepare the structure and associated systems to control the spread of fire and smoke.
The aim of this project is to design and construct a fire alarm for a building that will detect the presence of smoke during fire accident in a building.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- LIMITATION OF THE PROJECT
- APPLICATION OF THE PROJECT
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- REVIEW OF SMOKE DETECTOR
- REVIEW OF TYPES OF FIRE ALARM SYSTEM
- REVIEW OF FIRE ALARM DESIGN
- REVIEW OF RELATESD WORK
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BLOCK DIAGRAM OF THE SYSTEM
3.2 SENSOR DESCRIPTION
3.3 SCHEMATIC OF THE FIRE ALARM CIRCUIT
3.4 WORKING OF FIRE ALARM
3.5 12V REGULATED POWER SUPPLY UNIT
3.6 DESCRIPTION OF MAJOR COMPONENTS USED
CHAPTER FOUR
4.0 TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
In modern society, it is impossible to imagine house or building without a fire accident detector. Modern houses require a continuous installation of fire detector. Not only industry, but also in the household. Take the case of a duplex that experience a fire accident without a detector that means everything in that building will get burnt even human beings. But in a case whereby fire alarm is installed that means everyone in that building will be alerted and also fire security bodies will also be informed for quick security action. The same thing can also happen to our offices and industries. In order to notify residence of any building in the presence of fire accident, a fire alarm system is used.
An automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is classified as either automatically actuated, manually actuated, or both. Automatic fire alarm systems are intended to notify the building occupants to evacuate in the event of a fire or other emergency, report the event to an off-premises location in order to summon emergency services, and to prepare the structure and associated systems to control the spread of fire and smoke.
1.2 STATEMENT OF PROBLEM
The Nigerian environment is considered to be hazards prone brought about by man-made and natural disasters due to its geographic circumstance which is exposed to catastrophic, floods droughts and fires. Based on the reports; devastations of these natural hazards and disasters including fires have increased in recent years. Our lifestyle of negligence and adapting to emerging technological solutions puts us at the risk of loss to fire and related occurrences as seen in markets, homes and other public places. The risk of fire occurrence is high especially during the dry season, Christmas and New Year celebration due to firecrackers. In the case where house fires are prevalent, it has effect to derail the economic growth, destroy social and physical capital including infrastructures, which resort to reallocation of ongoing programs to finance relief operations to fatalities and inhabitants and reconstruction efforts which diverts funds to social services. Fires are considered natural and man-made hazards. This technology aimed at putting an end to these problems by alerting the owner of house at the starting point of fire accident via alarm.
1.3 AIM AND OBJECTIVE OF THE PROJECT
The main aim of this work is to construct a device that will detect the unwanted presence of fire by monitoring environmental changes associated with combustion using MQ-2 as the sensor. At the end of this work the following objectives shall be achieved:
- To build a device that senses the presence of smoke during fire accident.
- To become conversant with MQ2.
- To improve home security
1.4 PURPOSE OF THE PROJECT
The purpose of this work is to protect houses against fire accident. This fire alarm system will instantly notify you of any fire outbreak in your houses.
1.5 SIGNIFICANCE OF THE PROJECT
The primary advantage of a home fire alarm system is increased reliability and the ability to place alarms and bells exactly where needed. However, the reason most people have them is that they wanted a burglar alarm system and the cost of adding fire alarm features to a residential burglary system is relatively small.
Another advantage of fire alarms is the flexibility to place them in specific rooms and areas of your choice. Although there are guidelines about certain areas to avoid, such as spots too close to bathrooms, where steam from showers and baths will inadvertently trigger the alarm, you do have options for where to install the units. For example, shared hallways for multiple bedrooms can be the location for a single fire alarm, or you can install the alarm in a bedroom that is usually closed off to other rooms.
When installed as part of a house or building's fire alarm system, instead of as single, self-contained units, fire alarms provide additional protection whether inhabitants are inside the dwelling at the time of the alarm or not. When the monitoring station that the system is connected with receives the signal, it can send emergency medical help for individuals who need it, and fire department personnel can assist those who need help exiting the home or building. Also, as part of an overall system, one fire alarm that goes off triggers all the other fire alarms to go off, providing an alert to anyone within the vicinity.
This fire alarm is an inexpensive way to provide protection from smoke and possible fires.
1.6 LIMITATION OF THE PROJECT
1.7 APPLICATION OF THE PROJECT
Fire alarm plays vital role in risk reduction by helping to control fires at early stages or by initiating an alarm. This device can be used in places like:
- Homes
- Worshipping places
- Industrial
- factory and offices
1.8 LIMITATION OF THE PROJECT
The amount of “smoke” present may be insufficient to alarm smoke detectors. Smoke detectors are designed to alarm at various levels of smoke density. If such density levels are not created by a developing fire at the location of detectors, the detectors will not go into alarm.
• Smoke detectors, even when working properly, have sensing limitations. Detectors that have photo-electronic sensing chambers tend to detect smoldering fires better than flaming fires, which have little visible smoke. Detectors that have ionizing-type sensing chambers tend to detect fast flaming fires better than smoldering fires. Because fires develop in different ways and are often unpredictable in their growth, neither type of detector is necessarily best and a given type of detector may not provide adequate warning of a fire.
• Smoke detectors are subject to false alarms and nuisance alarms. For example, a smoke detector located in or near a kitchen may go into nuisance alarm during normal operation of kitchen appliances.
In addition, dusty or steamy environments may cause a smoke detector to falsely alarm. If the location of a smoke detector causes an abundance of false alarms or nuisance alarms, do not disconnect the smoke detector; call a professional to analyze the situation and recommend a solution.
• Smoke detectors cannot be expected to provide adequate warning of fires caused by arson, children playing with matches (especially within bedrooms), smoking in bed, violent explosions (caused by escaping gas, improper storage of flammable materials, etc.
• System components will not work without electrical power. If system batteries are not serviced or
Replaced regularly, they may not provide battery backup when AC power fails.
• Environments with high air velocity or that are dusty or dirty require more frequent maintenance.
- In general, fire alarm systems and devices will not work without power and will not function properly unless they are maintained and tested regularly.
- The most common cause of an alarm system not functioning when fire occurs is inadequate maintenance. As such, the alarm system should be tested weekly to make sure all sensors, transmitters, and notification devices are working properly.
1.9 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this study. In this chapter, the background, significance, objective limitation and problem of this study were discussed.
Chapter two is on literature review of the study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a fire (smoke) alarm system using mq sensor" is also available. Order full work to download. Chapter two of "design and construction of a fire (smoke) alarm system using mq sensor" consists of the literature review. In this chapter all the related work on "design and construction of a fire (smoke) alarm system using mq sensor" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a fire (smoke) alarm system using mq sensor" is available. Order full work to download. Chapter three of "design and construction of a fire (smoke) alarm system using mq sensor" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a fire (smoke) alarm system using mq sensor" is available. Order full work to download. Chapter four of "design and construction of a fire (smoke) alarm system using mq sensor" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of a fire (smoke) alarm system using mq sensor" is available. Order full work to download. Chapter five of "design and construction of a fire (smoke) alarm system using mq sensor" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
