DESIGN AND CONSTRUCTION OF A FOUR-WAY REMOTE CONTROL USING ARDUINO UNO
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a four-way remote control using arduino uno". Please, sit back and study the below research material carefully. This project topic ( design and construction of a four-way remote control using arduino uno) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a four-way remote control using arduino uno" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a four-way remote control using arduino uno" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF A FOUR-WAY REMOTE CONTROL USING ARDUINO UNO
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of a four-way remote control using arduino uno" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a four-way remote control using arduino uno" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a four-way remote control using arduino uno" visible for everyone, then the complete material on "design and construction of a four-way remote control using arduino uno" is to be ordered for. Happy viewing!!!
The main objective of this project is to develop a four channel remote control system using an Arduino board. As technology is advancing so houses are also getting smarter. Modern houses are gradually shifting from conventional switches to centralized control system, involving remote controlled switches. Presently, conventional wall switches located in different parts of the house makes it difficult for the user to go near them to operate. Even more it becomes more difficult for the elderly or physically handicapped people to do so. Remote controlled system provides a most modern solution with smart phones. In order to achieve this, a IR module is interfaced to the Arduino board at the receiver end while on the transmitter end, a tv remote was used. By pressing the buttons of the remote, the loads can be turned ON/OFF remotely through this technology.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM AND OBJECTIVE OF THE PROJECT
- SCOPE OF THE PROJECT
- LIMITATION OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- MOTIVATION
- METHODOLOGY
- PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 LITERATURE REVIEW OF THE STUDY
2.3 HISTORICAL BACKGROUND OF REMOTE CONTROL
2.3 APPLICATION OF THE SYSTEM
2.4 BENEFIT OF THE SYSTEM
CHAPTER THREE
3.1 SYSTEM BLOCK DIAGRAM
3.2 SYSTEM CIRCUIT DIAGRAM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DESCRIPTION
3.5 POWER SUPPLY UNIT
3.6 PROGRAM CODE
CHAPTER FOUR
RESULT ANALYSIS
4.0 RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING OF SYSTEM OPERATION
4.4 PACKAGING
4.5 MOUNTING PROCEDURE
4.6 TESTING
4.6.1 Pre-implementation test
4.6.2 Post-implementation testing
4.7 RESULT ANALYSIS
4.8 COST ANALYSIS
CHAPTER FIVE
- CONCLUSIONS
5.2 REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 Background of Study
Wireless device having electronic properties are able to operate electrical device from a distance is considered a remote. The remote control is design to provide convenience to its user, and a means through which direct operation of device is achieved in devices that pose inconvenience (such as digital light processing protector wounded on high ceiling being manipulated from floor level) while operating. Since the beginning of industrial revolution, remote control had taken a new pace from ultrasonic tones to infrared (engineered control system which uses infrared to send a digital code pulse of infrared radiation to control device function including power volume channel, track change, heat fan speed among others) and now, to Bluetooth connectivity, motion sensor enables capabilities and voice control (Warey and Stabe, 2011).
Infrared transmitter (remote controls) emits pulse of invisible infrared light corresponding to the binary code present in the device (a tsop1738 embedded, which receives the infrared transmitted code) in which the user intends to control. The tsop1738 sensor is controlled by Arduino (used for controlling the whole process of the device, after receiving signal from IR remote, it sends signal to the relays which are responsible for switching action of the home appliances through a U relay driver).
The Arduino decodes the received train of pulse from the TSOP1738 sensor into a hex value and compares that decoded value with the predefined hex value of the pressed button.
1.2 Statement of the Problem
Technology has advanced so much in the last decade or two that it has made life more efficient and comfortable. The comfort of being able to take control of devices from one particular location has become imperative as it saves a lot of time and effort. Therefore there arises a need to do so in a systematic manner which has been implemented with this system. The system proposed is an extended approach to automating a control system. With the advancement and breakthroughs in technology over the years, the application of this system comes in handy when people who forget to do simple things such as turn ON or OFF devices at their home or in their office, they can now do so without them having to go close to the devices or touching them before turning them ON or OFF. Engineering is all about solving problems and making life easy for human beings. This project is centered towards an automated environment. Human beings undergo stress and face challenges when controlling home appliances manually, so using a remote is faster and time management.
1.3 Aim and Objectives
The aim of this project is to construct a home control system using 4-channel infrared remote control with Arduino which will be achieved by the following objectives:
i. To obtain an infrared remote control
ii. To test the constructed remote control using the receiver
iii. To know the maximum distance at which the constructed infrared remote operate effectively.
1.4 Motivation
The dream of an automated world where devices control themselves requiring little or no human effort, stirred the interest towards this project. With automation, life becomes easy and physical and mental efforts are channelled towards a greater course.
1.5 Methodology
This project is divided into two major parts, the software part and the hardware part. The software part involves a program written in C++ language, the program is written such that the remote sends command signal to the Arduino which in turn send related signal to the relays to switch ON or OFF the appliances. The hardware part comprises of the Arduino board, IR remote, and some electrical components that help the system to function efficiently.
IR REMOTE CONTROL
TSOP 1738 SENSOR
POWER SU PPLY
RELAY MODULE
LOAD 1
LOAD 2
LOAD 3
LOAD 4
ARDIUNO (UNO)
1.6 Significance of Study
The challenges faced by people especially when you want to switched ON or OFF your home appliances without stress, the system can be easily use to put the appliances ON or OFF at your comfort.
1.7 Limitation of the study
This project has certain limitations which include:
i. The user can only switch ON and OFF the appliances
ii. Devices that are not connected to the circuit cannot be controlled using this project.
iii. Operation of the controlling unit is only possible through a dedicated remote control with the capability of turning some distance away.
iv. The control system will include two separate units: the transmitter, and the receiver unit. There will therefore be two operating environments. When operating the system the user will make sure that there is no obstacle in between the transmitter and the receiver.
1.8 Scope of the Study
This project work is limited to the construction of a control system using infrared remote control with Arduino. This device allows for a user to remotely control and monitor multiple home appliances using a remote. This system will be a powerful and flexible tool that will offer this service at any time, and from anywhere with the constraints of the technologies being applied. Possible target appliances include (but are not limited to) climate control systems, security systems, and lights; anything with an electrical interface.
1.9 Project Outline
This report is outlined in the following format: chapter one contains the general introduction, chapter two; the review of related literature, chapter three; construction, packaging and the operation of principle, chapter four; testing and results, chapter five contains the conclusion and recommendation.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a four-way remote control using arduino uno" is also available. Order full work to download. Chapter two of "design and construction of a four-way remote control using arduino uno" consists of the literature review. In this chapter all the related work on "design and construction of a four-way remote control using arduino uno" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a four-way remote control using arduino uno" is available. Order full work to download. Chapter three of "design and construction of a four-way remote control using arduino uno" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a four-way remote control using arduino uno" is available. Order full work to download. Chapter four of "design and construction of a four-way remote control using arduino uno" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of a four-way remote control using arduino uno" is available. Order full work to download. Chapter five of "design and construction of a four-way remote control using arduino uno" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
Visit the link below to see our recent works, and SUBSCRIBE to receive notification for our electronics teachings and practicals.
https://www.youtube.com/channel/UChY9Z1-egigJbYjYnapd0nw
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
