USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a gas detection system using arduino". Please, sit back and study the below research material carefully. This project topic (design and construction of a gas detection system using arduino) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a gas detection system using arduino" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a gas detection system using arduino" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of a gas detection system using arduino" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a gas detection system using arduino" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a gas detection system using arduino" visible for everyone, then the complete material on "design and construction of a gas detection system using arduino" is to be ordered for. Happy viewing!!!
This work is on a gas detection system. Gas detector is a device that detects the presence of gases in an area, often as part of a safety system. This type of equipment is used to detect a gas leak. A gas detector can sound an alarm to operators in the area where the leak is occurring, giving them the opportunity to leave. This type of device is important because there are many gases that can be harmful to organic life, such as humans or animals. This device identifies potentially hazardous gas leaks by sensor.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- AIM/ OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- SCOPE OF THE PROJECT
- APPLICATION OF THE PROJECT
- LIMITATION OF THE PROJECT
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
2.0 LITERATURE REVIEW
2.1 OVERVIEW OF THE STUDY
2.2 HISTORICAL BACKGROUND OF THE STUDY
2.3 DIFFERENT TYPE OF GAS DETECTOR
CHAPTER THREE
DESIGN METHODOLOGY
3.0 METHODOLOGY
3.1 SYSTEM BLOCK DIAGRAM
3.2 SYSTEM COMPONEMTS
3.3 SYSTEM CONTROL SYSTEM
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 SYSTEM FLOW CHART
CHAPTER FOUR
4.0 RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE
4.2 TESTING OF SYSTEM OPERATION
4.3 ASSEMBLING
4.5 OBSERVATION
4.3 DIFFICULTIES ENCOUNTERED ON THE SYSTEM
CHAPTER FIVE
- CONCLUSION, RECOMMENDATION AND REFERENCES
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
- INTRODUCTION
The LPG can be leaked in different forms such as gaseous or liquid aspects. Generally, a given leak in the liquids are vanished due to the evaporation processes that generates a cloud of gas shown stuck on the wall or ground as it is heavier than the air. The LPG is found widely in the houses, fabrications and fuels. The researchers were struggling in 1910 to investigate the reason of why the gasoline evaporates faster. They discovered that the propane, methane, butane are gases that evaporate so fast. It is worth mentioning that the LPG and the natural gases are environmentally friendly and classified as being detected easily. These kinds of gases are kept in cylinders and can be vanished in ordinary temperature degrees. The LPG gas is considered as a mixture of butane, propane and saturated – unsaturated hydrocarbons [1, 2, 3]. The impact of the LPG on human being is extremely considerable and it can cause burns over the skin, long sleep, annoyed breathing, etc. This risky gas has several individualities such as pressure, flammability, combustion and toxicity. This project is designed to detect and monitor the leak of the gases relatively in the closed places. The module can be employed as household application to supervise and apply control action on different situations accordingly. In addition, the module can be used in the hospitals, hotels, cars and in the industries that use LPG gas as substantial applications. The detection process of the gas in this work excites multiple measurements such as alarm systems, control devices and communication systems based on the Global System for Mobile Communication (GSM) module [4, 5, 6].
1.1 AIM AND OBJECTIVE THE PROJECT
The main aim of this work is to design a security/alarm device that detects the presence of gases in an area, often as part of a safety system using arduino and GSM. Gas detectors can be used to detect combustible, flammable and toxic gases, and oxygen depletion.
1.2 PURPOSE OF THE PROJECT
One of its main purposes is to monitor an area. Gas detectors measure and indicate the concentration of certain gases in an air via different technologies. Typically employed to prevent toxic exposure and fire, gas detectors are often battery operated devices used for safety purposes. This device designed as portable or stationary (fixed) units and work by signifying high levels of gases through a series of audible and visible indicators, such as alarms and lights.
1.3 SIGNIFICANCE OF THE PROJECT
Gas detectors can be used to detect combustible, flammable and toxic gases, and oxygen depletion. This type of device is used widely in industry and can be found in locations, such as on oil rigs, to monitor manufacture processes and emerging technologies such as photovoltaic. They may be used in firefighting.
1.4 SCOPE OF THE PROJECT
This device used a safe wireless module to detect a gas leakage. The module is household use application where home fires or Liquefied Petroleum Gas (LPG) are classified as the reason of the disasters. The LPG is considered as the most inflammable gases that can ignite fires even in the far distances where gas leak exists. The module can be applied in several places particularly in the fabrications that depend mainly on LPG gas to manage their works. According to the facilities offered by this work, the whole module is functionally separated to perform two tasks identified by gas leak monitoring and the precautions taken accordingly. The module reads the gas sensor in a proposed environment to discover whether gas concentration exceeds a specified range. The system will be activated once the module detects that the gas concentration is altered, and accordingly the control action turns the alarm system alongside with air puller device ON, and sends a warning SMS to a certain recipient using GSM module.
1.5 APPLICATION OF THE PROJECT
Gas detector can be found useful to detect the presence of gases in areas such as:
- industrial plants,
- refineries,
- vehicles
- Homes (kitchen)
- Or In places where the use of gas or the presence of gas can be dangerous
1.6 PROJECT MOTIVATION
The storage or distribution of any gas involves the gas being contained in vessels or pipes under pressure. Any leak in these systems will therefore result in significant amounts of gas (probably invisible) escaping into the surrounding air. What happens to the gas then depends on the nature of the gas and the immediate environment, but can pose a threat to life in three ways:
- Combustible gas can gather and reach a density at which it can ignite and cause a fireball.
- Toxic gas can cause illness, paralysis or death if inhaled.
- Any gas in sufficient quantities will displace oxygen and therefore pose a serious risk to life.
1.7 LIMITATION OF THE PROJECT
- This device requires steady power supply for effect operation. That means that it will become inactive if the mains power supply fails or the battery goes low.
- The Sensor requires quarterly calibration and do not have a long life.
1.8 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this work. In this chapter, the background, significance, purpose, objective limitation of this work were discussed.
Chapter two is on literature review of this work. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a gas detection system using arduino" is also available. Order full work to download. Chapter two of "design and construction of a gas detection system using arduino" consists of the literature review. In this chapter all the related works on "design and construction of a gas detection system using arduino" were reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a gas detection system using arduino" is available. Order full work to download. Chapter three of "design and construction of a gas detection system using arduino" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a gas detection system using arduino" is available. Order full work to download. Chapter four of "design and construction of a gas detection system using arduino" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of a gas detection system using arduino" is available. Order full work to download. Chapter five of "design and construction of a gas detection system using arduino" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA: