DESIGN AND CONSTRUCTION OF A GREENHOUSE MONITORING A TEMPERATURE AND HUMIDITY CONTROL
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a greenhouse monitoring a temperature and humidity control". Please, sit back and study the below research material carefully. This project topic "design and construction of a greenhouse monitoring a temperature and humidity control" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a greenhouse monitoring a temperature and humidity control" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a greenhouse monitoring a temperature and humidity control" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work, "design and construction of a greenhouse monitoring a temperature and humidity control" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a greenhouse monitoring a temperature and humidity control" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a greenhouse monitoring a temperature and humidity control" visible for everyone, then the complete material on "design and construction of a greenhouse monitoring a temperature and humidity control" is to be ordered for. Happy viewing!!!
In traditional farming, farmer has to visit the farming land regularly to measure the various environmental parameters such as temperature, humidity, light intensity and soil moisture to cultivate the right crops at right time in right soil. Even though this traditional farming system have been used for years, the system is hectic and fail to prove high productivity rate as farmer usually unable to measure all the parameter accurately [1]. In contrast, greenhouse farming is a system where farmer cultivate crops in ecosystem environments where all environmental parameters are adjusted based on crops types. Automation in greenhouse is a method where farmer is able to monitor and control the greenhouse environment automatically from anywhere in the world any time [3]. The proposed is on automated greenhouse monitoring and controlling system that incorporate various sensors such as temperature and humidity sensor to collect possible environmental parameters of greenhouse as well as integrate Arduino Uno R3 (to store and process data), GSM module (to send the measured value of the various parameters to the user cell phone via SMS to ensure efficient growth of plants), solar power system with rechargeable battery (to make sure continuous power supply to the greenhouse system). Moreover, Internet of Things (IoT) is used to store data to a database and process the collected data and finally send the information to the android apps which has been developed for monitoring and controlling of greenhouse by the user.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM AND OBJECTIVE OF THE PROJECT
- SCOPE OF THE PROJECT
- LIMITATION OF THE PROJECT
- METHODOLOGY
- PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 OVERVIEW OF THE STUDY
2.3 ENVIRONMENTAL FACTORS FOR GREENHOUSE
2.3 REVIEW OF LITERATURES
CHAPTER THREE
3.0 METHODOLOGY
3.1 SYSTEM ARCHITECTURE
3.2 HARDWARE REQUIREMENT
3.3 SYSTEM CIRCUIT
3.4 CIRCUIT DESCRIPTION
3.5 SYSTEM IMPLEMENTATION
3.6 POWER SUPPLY UNIT
3.7 PROGRAM CODE
CHAPTER FOUR
RESULT ANALYSIS
4.0 RESULT AND DISCUSSION
CHAPTER FIVE
- CONCLUSIONS
5.2 REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
In this time and day, everything can be monitored and controlled automatically. Unfortunately, in an important sector like agriculture, the manual process is still very active, meaning the automatic monitoring and control of a greenhouse system hasn’t completely scaled through just yet, especially when it comes to small scale farming.
The reason whereby the automation of a greenhouse system hasn’t been put to a full-fledged use may be in view of several reasons, such as the absence of technical know-how, high cost and the requirement of high maintenance.
Agriculture has stood out amongst the most important occupations of individuals since the early advancement of humans and sadly, even to date, manual interventions in farming are inescapable. When it comes to a greenhouse monitor and control system, it is a very important part of agriculture as it can be used to grow plants under a controlled climatic condition for ideal plant produce [1], it is also to a great degree important in the sense that it shields plants from weather extremes by having a controlled climatic environment, it broadens the developing season and also empowers you to sow plants earlier and harvest plants later [2].
The monitoring and control of environmental temperature and soil moisture in a Greenhouse, is a new alternative to control some variables inside the greenhouse. The objective of the control is to maintain a certain value within a preset interval or value (set point) regardless of whether an external influence disrupts the process.
1.2 PROBLEM STATEMENT
In traditional farming, farmer has to visit the farming land regularly to measure the various environmental parameters such as temperature, humidity, light intensity and soil moisture to cultivate the right crops at right time in right soil. Even though this traditional farming system have been used for years, the system is hectic and fail to prove high productivity rate as farmer usually unable to measure all the parameter accurately [1]. Greenhouse monitoring and controlling system, it is a very important part of agriculture as it can be used to grow plants under a controlled climatic condition for ideal plant produce. Controlling greenhouse manually or traditionally takes much time and involves much labour. This project was carried out to automatically monitor a greenhouse which will involve the system being closely controlled and monitored in a set climatic condition which is needed for optimum farm/plant produce.
1.3 AIM AND OBJECTIVE OF THE STUDY
The main aim of this work is to create an effective greenhouse environment which will drastically reduce the cost of labour and also help small scale farmers cultivate crops all year round. The objectives are:
- To monitor greenhouse wirelessly
- To increase agriculture productivity
- To reduce human labour.
1.4 SCOPE OF THE STUDY
The scope of this work is on building an automatic monitor and control system for a greenhouse. Greenhouse farming is a system where farmer cultivate crops in ecosystem environments where all environmental parameters are adjusted based on crops types. Automation in greenhouse is a method where farmer is able to monitor and control the greenhouse environment automatically from anywhere in the world any time [3]. In this paper, authors proposed an automated greenhouse monitoring and controlling system that incorporate various sensors such as temperature sensor and humidity sensor to collect possible environmental parameters of greenhouse as well as integrate Arduino Uno. It is accomplished by the data communications between Arduino, DHT11 Sensor Module, ESP8266 WIFI module and LCD. Celsius scale thermometer and percentage scale humidity meter displays the ambient temperature and humidity through a LCD display.
1.5 LIMITATION OF STUDY
As we all know that no human effort to achieve a set of goals goes without difficulties, certain constraints were encountered in the course of carrying out this project and they are as follows:-
- Difficulty in information collection: I found it too difficult in laying hands of useful information regarding this work and this course me to visit different libraries and internet for solution.
- Financial Constraint: Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet).
- Network challenge: this device operates with gsm network. Whenever there is a network challenge this device becomes affected.
1.6 RESEARCH METHODOLOGY
In the course of carrying this study, numerous sources were used which most of them are by visiting libraries, consulting journal and news papers and online research which Google was the major source that was used.
1.7 PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a greenhouse monitoring a temperature and humidity control" is also available. Order full work to download. Chapter two of "design and construction of a greenhouse monitoring a temperature and humidity control" consists of the literature review. In this chapter all the related work on "design and construction of a greenhouse monitoring a temperature and humidity control" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a greenhouse monitoring a temperature and humidity control" is available. Order full work to download. Chapter three of "design and construction of a greenhouse monitoring a temperature and humidity control" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a greenhouse monitoring a temperature and humidity control" is available. Order full work to download. Chapter four of "design and construction of a greenhouse monitoring a temperature and humidity control" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of a greenhouse monitoring a temperature and humidity control" is available. Order full work to download. Chapter five of "design and construction of a greenhouse monitoring a temperature and humidity control" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
