DESIGN AND CONSTRUCTION OF A HOME SECURITY SYSTEM
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a home security system" Please, sit back and study the below research material carefully. This project topic "design and construction of a home security system" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a home security system" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a home security system" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF A HOME SECURITY SYSTEM
BY
---
EE/H2013/01430
DEPARTMENT OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of a home security system" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.
By
Dr. --- Dr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Dr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work “design and construction of a home security system” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “design and construction of a home security system” visible for everyone, then the complete material on “design and construction of a home security system” is to be ordered for. Happy viewing!!!
The main objective of this project was to ensure a proper security to building against theft or intruder. The circuit uses 555 timer IC which was wired as a timing circuit, amplifier to obtain a maximum audible sound. The 555 timr times the circuits and also generates a tone and this tone is send to transistor which amplifies the tone generated through a loud speaker or buzzer.
This device functions as a major security alarms used in residential, commercial, industrial, and military properties for protection against burglary (theft) or property damage, as well as personal protection against intruders .
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRCT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- PROBLEM STATEMENT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- SCOPE OF THE PROJECT
- PURPOSE OF THE PROJECT
- LIMITATION OF THE PROJECT
- APPLICATION OF THE PROJECT
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
2.0 LITERATURE REVIEW
2.1 REVIEW OF THE RELATED STUDIES
2.2 HISTORICAL BACKGROUND OF INTRUDER ALARM
2.3 REVIEW OF DIFFERENT TYPES OF INTRUDER SENSOR
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BLOCK DIAGRAM OF THE SYSTEM
3.2 CIRCUIT DIAGRAM
3.3 CIRCUIT DESCRIPTION
3.4 CIRCUIT PRINCIPLE
3.4 SYSTEM CIRCUIT DESIGN
3.5 COMPONENTS LIST
4.0 RESULT ANALYSIS
4.1 INSTALLATION OF THE COMPLET DESIGN
4.2 CONSTRUCTION PROCEDURE AND TESTING
4.3 CASING AND PACKAGING
4.4 ASSEMBLING OF SECTIONS
4.5 TESTING OF SYSTEM OPERATION
4.6 PROBLEM ENCOUNTERED
4.7 COST ANALYSIS
- CONCLUSIONS
- RECOMMENDATION
5.3 REFERENCES
CHAPTER ONE
1.1 INTRODUCTION
The need for having home protection has always been there. But in the recent times, considering a dramatic rise in petty crimes like robbery and theft, the need has been more strongly felt to have a fool proof protection of the belongings and the family members. Home security has come a long way in the last few decades. It was in the hands of a guard who manually provided surveillance during nights in the earlier days, but it was not fool proof as it was only normal for him to have momentary lapse of concentration.
The guard was also susceptible to sleep at times. It was then that home alarm system based upon electronic circuits were developed which proved to be highly reliable and were appreciated by the people as they were relieved from constant monitoring of their homes.
This intruder alarm system uses 555 timer IC which was wired as a timing circuit, as tone generator and amplifier to obtain a maximum audible sound and ir sensor which generates an interrupt signal. This interrupt signal is given to the speaker to alert the user.
The 555 timer times the circuits and also generates a tone and this tone is send to transistor which amplifies the tone generated through a loud speaker or buzzer.
The reset button is used to reset or open circuit the system back to its initial stage. The system is powered with 12V power supply voltage.
1.1 BACKGROUND OF THE PROJECT
The need for having home protection has always been there. But in the recent times, considering a dramatic rise in petty crimes like robbery and theft, the need has been more strongly felt to have a fool proof protection of the belongings and the family members. Home security has come a long way in the last few decades. It was in the hands of a guard who manually provided surveillance during nights in the earlier days, but it was not fool proof as it was only normal for him to have momentary lapse of concentration.
The guard was also susceptible to sleep at times. It was then that home alarm system based upon electronic circuits were developed which proved to be highly reliable and were appreciated by the people as they were relieved from constant monitoring of their homes.
1.1 PROBLEM STATEMENT
The need for having a constant home protection has always been there. But in the recent times, considering a dramatic rise in petty crimes like robbery and theft, the need has been more strongly felt to have a fool proof protection of the belongings and the family members. Home security has come a long way in the last few decades. It was in the hands of a guard who manually provided surveillance during nights in the earlier days, but it was not fool proof as it was only normal for him to have momentary lapse of concentration. This device brought solution to this need. It ensures adequate protection against intruders.
1.3 AIM OF THE PROJECT
The main aim of this project is to create a comfort in the minds of house owners when they out from their premises without much fear of intruder.
1.4 OBJECTIVE OF THE PROJECT
This circuit is designed to alert the user when an intruder enters into the home. If there is any obstacle in front of IR sensor, it generates an interrupt signal. This interrupt signal is given to the speaker to alert the user.
1.5 SIGNIFICANCE OF THE PROJECT
This device functions as an electronics watch dog. This device functions as a major security alarms used in residential, commercial, industrial, and military properties for protection against burglary (theft) or property damage, as well as personal protection against intruders.
1.6 PURPOSE OF THE PROJECT
This project proposes the development of security system for form houses and residential houses.
1.7 SCOPE OF THE PROJECT
In an extremely mechanized word such as today’s it is necessary to make our life better, convertible and economical. This is the purpose for which the Electronic house is developed. The main part of the circuit is 555 timer and IR sensor: IR transmitter always emits the IR (Infrared) rays which have to be received by IR receiver. When there is an obstacle in front of IR sensor, the transmitted IR rays are reflected back to the IR receiver. The output of Op-Amp is high when IR receiver receives the reflected IR rays. This output of operational amplifier is connected to the RESET pin of 555 Timer.
1.8 APPLICATION OF THE PROJECT
This device is used in the following places as:
- Home Security Systems.
- Prisons Security.
- Vehicle Security.
- Broadband alarm monitoring.
- Glass Break.
- Property Theft Alarm
1.9 LIMITATION OF THE PROJECT
This circuit produces the sound even if there is any non-living thing in front of IR sensor.
1.10 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this study. In this chapter, the background, significance, objective limitation and problem of this study were discussed.
Chapter two is on literature review of the study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER ONE: The complete chapter one of “design and construction of a home security system” is available. Order full work to download. Chapter one of “design and construction of a home security system”consists of the literature review. In this chapter all the related work on“design and construction of a home security system” was reviewed.
CHAPTER TWO: The complete chapter two of “design and construction of a home security system” is available. Order full work to download. Chapter two of “design and construction of a home security system” consists of the literature review. In this chapter all the related work on “design and construction of a home security system” was reviewed.
CHAPTER THREE: The complete chapter three of “design and construction of a home security system” is available. Order full work to download. Chapter three of “design and construction of a home security system” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of “design and construction of a home security system” is available. Order full work to download. Chapter four of “design and construction of a home security system” consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of “design and construction of a home security system” is available. Order full work to download. Chapter five of “design and construction of a home security system” consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.