USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a mobile reading lamp with phone charger". Please, sit back and study the below research material carefully. This project topic "design and construction of a mobile reading lamp with phone charger" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a mobile reading lamp with phone charger" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a mobile reading lamp with phone charger" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

---

APPROVAL PAGE

This is to certify that the research work "design and construction of a mobile reading lamp with phone charger" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of a mobile reading lamp with phone charger" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a mobile reading lamp with phone charger" visible for everyone, then the complete material on "design and construction of a mobile reading lamp with phone charger" is to be ordered for. Happy viewing!!!

---

This work is on mobile reading lamp with phone charger which is a rechargeable source of light which uses AC source to recharge; the stored energy is to be used when there is power outage. It also serves as immanency sources of light mostly used when there is failure from out public power supply at night. This device not only useful in the time of power cut but also at your workbench you can use this circuit to check or testing of your electronic projects. Mobile phone batteries can be charged with the help of these circuits.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.1    INTRODUCTION
1.2    OBJECTIVE OF THE PROJECT
1.3    SIGNIFICANCE OF THE PROJECT
1.4    LIMITATION OF THE PROJECT

CHAPTER TWO
LITERATURE REVIEW

• HISTORICAL BACKGROUND OF CELL PHONE BATTERY
• REVIEW OF CELL PHONE BATTERY CONSTRUCTION
• REVIEW OF BATTERY CHARGE AND DISCHARGE

HISTORICAL BACKGROUND OF MOBILE  READING LANTERN

CHAPTER THREE
3.0     CONSTRUCTION METHODOLOGY
3.1      SYSTEM BLOCK DIAGRAM
3.2       SYSTEM OPERATION
3.3       SYSTEM CIRCUIT DIAGRAM
3.4       COMPONENTS DESCRIPTION
3.5       USB CONNECTION AND CONFIGURATION
CHAPTER FOUR
4.1      RESULT ANALYSIS
4.2      CONSTRUCTION PROCEDURE AND TESTING
4.3      CASING AND PACKAGING
4.4       TESTING OF SYSTEM OPERATION
4.5       MAINTENANCE OF THE SYSTEM

CHAPTER FIVE

• CONCLUSION
• RECOMMENDATION
• REFERENCES

 

CHAPTER ONE
1.0                                                        INTRODUCTION
Mobile reading lamp is a portable lighting device or mounted light fixture used to illuminate broad areas. Lanterns may also be used for signaling, as torches, or as general light sources outdoors. Low light level varieties are used for decoration. The term "lantern" is also used more generically to mean a light source, or the enclosure for a light source.
Rechargeable lights are very useful electrical gadgets and are quite popular, too. During a power failure these portable lights are able to instantly illuminate through battery back up and never allow us to stumble in the darkness. Although you will find a variety of them in different shapes and sizes in the market, but building your own emergency light at home can be a totally different experience. It will not only help you to create a quality design but also will acquaint you to the technical aspects of the unit. Besides, you also get an opportunity to customize the circuit as per your own needs.
This device is very much useful in the time of power cut but also used as main power supply. At your workbench you can use this circuit to check or testing of your electronic projects. Mobile phone batteries can be charged with the help of these circuits.
This device comes with rechargeable LED lantern, comfortable handle, battery indicator, USB port for mobile charging, and mobile charging connectors.

1.2                                             OBJECTIVE OF THE PROJECT
The objective of this work is to design a mobile lighting gadget that can be recharged and later used whenever there is power outage during the night, which can also charged mobile phone batteries.

1.3                                         SIGNIFICANCE OF THE PROJECT
It is very much useful in the time of power cut but also used as main power supply. At your workbench you can use this circuit to check or testing of your electronic projects. Mobile phone batteries can be charged with the help of these circuits.

1.4                                           LIMITATION OF THE PROJECT
The circuit which is explained below work on 5v regulated voltage and provide sufficient amount of current for the slow charging of your mobile phones.

1.5                           APPLICATION OF THE PROJECT
Mobile reading lantern with phone charger is used in many places such as:

• In school library, hall and labs
• Churches
• Workshop
• Homes, etc

All for the purpose of illuminating of such environment. They highly choose because of its simplicity and safety, that is, it can be charged, hanged, and continues with your adventures into the night.

 

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a mobile reading lamp with phone charger" is also available. Order full work to download. Chapter two of "design and construction of a mobile reading lamp with phone charger" consists of the literature review. In this chapter all the related work on "design and construction of a mobile reading lamp with phone charger" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of a mobile reading lamp with phone charger" is available. Order full work to download. Chapter three of "design and construction of a mobile reading lamp with phone charger" detector consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a mobile reading lamp with phone charger" is available. Order full work to download. Chapter four of "design and construction of a mobile reading lamp with phone charger" detector consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and construction of a mobile reading lamp with phone charger" is available. Order full work to download. Chapter five of "design and construction of a mobile reading lamp with phone charger" detector consist of conclusion, recommendation and references.

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: