USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a mosquito insect killer" Please, sit back and study the below research material carefully. This project topic "design and construction of a mosquito insect killer" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a mosquito insect killer " project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a mosquito insect killer" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN AND CONSTRUCTION OF A MOSQUITO INSECT KILLER

BY

---
EE/H2013/01430
DEPARTMENT OF ---
SCHOOL OF --
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of a mosquito insect killer" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a B.Sc on --- has been approved.

By
Dr. ---                                                    Dr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
 Dr. ---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work “design and construction of a mosquito insect killer” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” visible for everyone, then the complete material on “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” is to be ordered for. Happy viewing!!!

---

This work is on a mosquito insect killer. It is an Indoor and outdoor insect killer which gives an environmentally friendly strategy for getting rid of mosquitoes from your outdoors and your indoor environment. This device contains extraordinarily successful UV (Ultraviolet) lights that attract the mosquitoes and diverse dreadful little creatures towards it. The UV (Ultraviolet)  lights that attract mosquito insect to it and a grid around the LED light which grab and kills the mosquitoes.  

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE

• INTRODUCTION
• BACKGROUND OF THE PROJECT
• PROBLEM STATEMENT
• AIM/OBJECTIVE OF THE STUDY
• SIGNIFICANCE OF THE STUDY
• LIMITATION OF THE STUDY
• APPLICATION OF THE PROJECT
• SCOPE OF THE PROJECT
• METHODOLOGY
• PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

• REVIEW OF DIFFERENT TYPES OF MOSQUITO REPELLENT
• TYPES OF ELECTRONIC MOSQUITO REPELLING DEVICES
• EFFECTS ON MOSQUITOES

CHAPTER THREE
3.0      METHODOLOGY

• SYSTEM BLOCK DIAGRAM
• SYSTEM CIRCUIT DIAGRAM
• COMPONENTS LIST
• WORKING PRINCIPLE
• CIRCUIT DESCRIPTION
• TOOLS USED
• DESCRIPTION OF MAJOR COMPONENT’S DESCRIPTION

CHAPTER FOUR
4.0      TEST AND RESULT ANALYSIS

• CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
• CASING AND PACKAGING
• ASSEMBLING OF SECTIONS
• TESTING OF SYSTEM OPERATION
• INSTALLATION OF THE COMPLETED DESIGN
• DIFFICULTIES ENCOUNTERED ON THE SYSTEM
• ECONOMIC OF THE PROJECT
• PROJECT VIABILITY
• RELIABILITY
• MAINTAINABILITY
• PROJECT EVALUATION

CHAPTER FIVE

• CONCLUSION
• RECOMMENDATION
• REFERENCES 

CHAPTER ONE
1.0                                                        INTRODUCTION
None of us likes bugs at home. To kill these flying insects, they should first be attracted and then electrocuted. An electric fly swatter is one such device with a high voltage electrocuting circuit and an insect attracting UV lamp of 365 nm wavelength.

1.1                                           BACKGROUND OF THE STUDY
Insects bite is one of the major causes of sickness and diseases to human beings. Insect such as mosquito and tsetse fly are the cause of malaria and sleeping sickness according to world health organization (WHO). In the last decade people use different methods of controlling insect – mosquito, such methods are the use of mosquito net, mosquito coil, and herbs [1][2]. However, these methods of controlling and killing of mosquitoes are not fully effective due to some limitations attached to them. In this work, we are designing an electronics means of killing mosquito insect. In this method, a high voltage electrocuting circuit and an insect attracting UV lamp was used. It has uv lights that attract bugs to it and a grill around the UV light which grab and kill the mosquitoes. The UV lights attract insects towards the lamp and the high voltage grill will kill all the insects that approach its light [7].

1.2                                                  PROBLEM STATEMENT
Tackling and getting rid of mosquitoes is quite a tough task especially when you don't have access to expensive commercial machines. Even the marketed sprays & medicines are toxic chemicals and very harmful to health. To solve this problem, an electronics mosquito and insect killer was designed. This mosquito killer machine attracts mosquitoes due to ultraviolet light and kills them instantly as its metal grid emit high voltage electricity. This mosquito insect killer uses a mosquito high voltage grill to kill mosquitoes, thus making it safe for children and adults [3].

1.3                                       AIM / OBJECTIVE OF THE PROJECT
The main of this work is to build an electronics device that is used to kill mosquito insect. It attract mosquitoes with UV light and kill them using high voltage grid.
1.4                                              SIGNIFICANCE OF PROJECT

• It consumes lesser ( i.e Power 11W)
• It is Maintenance-free,Soundless
• No Smoke, No Allergy, No Pollution

1.5                                           LIMITATION OF THE PROJECT

• Unit size 11.5X11.5X28cm
• With Hanging Hook
• AC220-240V, 50-60Hz
• 1 Pc UV LED light,

1.6                                          APPLICATION OF THE PROJECT
This device is used in Indoor and outdoor insect controlling in such places like [1][2]:

• Churches
• Homes
• Offices
• Industries
• Restaurants/hotel/eateries

1.7                                                 SCOPE OF THE PROJECT
This device was built around a high voltage electrocuting circuit and an insect attracting UV lamp of 365 nm wavelength. This ultraviolet fluorescent lamp is mounted in the middle of the cabinet and a pair of carefully spaced, electrically insulated, charged wire grids surround the light [5].
When an insect comes close enough to the mesh pair, an electrical arc is formed, the dielectric breaks down and current flows through the insect’s body. Electrocuting the insect doesn’t require it to touch both the wires as an arc forms in the air gap over 1800 V [5].

1.8                                                        METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

• Study of the previous work on the project so as to improve it efficiency.
• Draw a block diagram.
• Test for continuity of components and devices,
• Design of the system was carried out by designing the block and circuit diagram.
• Studying of various component used in circuit.
• Construction of the circuit was done.
• Finally, the whole device was cased and final test was carried out.

1.9                                        PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction of the system were discussed.
Chapter two is on literature review. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.

CHAPTER TWO: The complete chapter two of “design and construction of a mosquito insect killer” is available. Order full work to download. Chapter two of “design and construction of a mosquito insect killer” consists of the literature review. In this chapter all the related work on “design and construction of a mosquito insect killer"

CHAPTER THREE: The complete chapter three of “design and construction of a mosquito insect killer” is available. Order full work to download. Chapter three of “design and construction of a mosquito insect killer” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a mosquito insect killer” is available. Order full work to download. Chapter four of “design and construction of a mosquito insect killer” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction of a mosquito insect killer” is available. Order full work to download. Chapter five of “design and construction of a mosquito insect killer” consist of conclusion, recommendation and references.

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.

---

For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com

---

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.