USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a multi port usb cell phone mobile charger". Please, sit back and study the below research material carefully. This project topic "design and construction of a multi port usb cell phone mobile charger" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a multi port usb cell phone mobile charger" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a multi port usb cell phone mobile charger" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of a multi port usb cell phone mobile charger" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of a multi port usb cell phone mobile charger" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a multi port usb cell phone mobile charger" visible for everyone, then the complete material on "design and construction of a multi port usb cell phone mobile charger" is to be ordered for. Happy viewing!!!

---

Cell phones need electric sources to charge their batteries in order to work, A DC cell phone or mobile phone charger is a device which charges a cellphone from an available DC supply source. The device converts the unregulated DC source into a constant current and constant voltage output which becomes safe for any mobile phone charging. The goal of this project is to create a multiple output cell phone chargers for Local areas that found it difficult to charge their phones. The charger takes an input of 12 volts from a 12v power supply and reduces the voltage level to 5 volts output used to charge cell phones.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
CHAPTER ONE

•  INTRODUCTION
• BACKGROUND OF THE PROJECT
• PROBLEM STATEMENT
• AIM AND OBJECTIVE OF THE PROJECT
• SCOPE OF THE PROJECT
• PURPOSE OF THE PROJECT
• APPLICATIONS OF THE PROJECT
• PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

• HISTORICAL BACKGROUND OF CELL PHONE BATTERY
• REVIEW OF CELL PHONE BATTERY CONSTRUCTION
• REVIEW OF BATTERY CHARGE AND DISCHARGE
• TYPES OF CELL PHONE BATTERIES

CHAPTER THREE
3.0      METHODOLOGY
3.1      CIRCUIT DIAGRAM OF CELL PHONE CHARGER
3.2      CIRCUIT OPERATION
3.4     CIRCUITS DESCRIPTION
CHAPTER FOUR
4.0      RESULT ANALYSIS
4.1      CONSTRUCTION PROCEDURE AND TESTING
4.2      CASING AND PACKAGING
4.3      ASSEMBLING OF SECTION
4.4      TESTING OF SYSTEM OPERATION
4.5      PROBLEMS ENCOUNTERED
4.6      COST ANALYSIS
CHAPTER FIVE
5.1      CONCLUSION
5.2      RECOMMENDATION
5.6      BIBLIOGRAPHY

  

CHAPTER ONE
1.0                                        INTRODUCTION
1.1                          BACKGROUND OF THE PROJECT
Cell phone Battery charger is an electronics device used in charging and recharging batteries when used up by the cell phone. This electronics device has the ability to stop charging when the battery is fully charged and starts charging when the battery voltage drops below the set point
The Cell phone Battery charger uses household current to put an electric charge into a discharged battery. The charger's circuits convert 240-volt household alternating current (AC) to the 9-volt direct current (DC), then regulate to 5v that the cell phone battery needs.
This charger will charge any cell phone battery that is rated 5v. It is fully automatic and will charge at a rate up to about 800mA until the battery voltage reaches a preset point at which it will switch to a very low current float charge. If the battery voltage drops again the charger will begin charging until the voltage once again reaches the maximum level and then stop charging. In this way it can be left connected to a battery indefinitely to maintain full charge without causing damage.
However, the focus of this project is specifically to design and construct a multiple USB cell phones charger powered by a single power source.

1.2                                  PROBLEM STATEMENT
Due to higher level of multiple phone usage by individual, for example, in Nigeria it is too difficult to an individual with just one mobile cellphone even among students and unemployed. And buying mobile cellphone chargers according to the number of cellphone someone has will consume much money and occupies spaces. It was because of this problem that a multible usb charger was invented. With this device multiple handsets can be charged simultaneously. This device provides safe, cheap  and reliable energy to under-privileged families, villages and areas of developing and third world countries.

1.3                                                AIM AND OBJECTIVES                              
The aim of this project is to design and construct a working multiple cell phones charger to charge a number of cell phones simultaneously.
The objectives are as follows:

• To use one charger to charge many handsets
•  To arrange and solder the component according to the design circuit.
•  To reduce the cost of purchasing multiple chargers
•  To test and evaluate the performance of the developed device.

1.4                                                  SCOPE OF THE PROJECT
The scope of this work is to build a charger that is capable of charging many phones simultaneously. This charger will charge any cell phone battery that is rated 5v. It produces up to about 800mA until the battery voltage reaches a preset point at which it will switch to a very low current float charge. If the battery voltage drops again the charger will begin charging until the voltage once again reaches the maximum level and then stop charging. In this way it can be left connected to a battery indefinitely to maintain full charge without causing damage.

1.5                                              PURPOSE OF THE PROJECT
The main purpose of the work is to produce a constant cell phone charging booth that runs solely on a single power supply source.

1.6                                     APPLICATIONS OF THE PROJECT
This device provides constant cell phone charging in our:

• Homes
• Workshops
• Worship centre (such as churches or mosque)
• Offices
• And any other places that electrical energy is been used

1.7                                         METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

• Study of the previous work on the project so as to improve it efficiency.
• Draw a block diagram.
• Test for continuity of components and devices,
• Design and calculation for the system was carried out.
• Studying of various component used in circuit.
• Construct a system circuit.
• Finally, the whole device was cased and final test was carried out.

1.8                                                         THESIS OUTLINE
This thesis consists of five chapters. Chapter One will discuss about the overview of the project, objective of the project, project scope and problem statement.
Chapter Two contains a detail description of the original setup. It explains about the concept used and the components that involved in the project.
Chapter Three includes the original designed circuit and its components. Also a complete analysis to the presented design will be given.
Chapter Four shows the experimental work and the practical testing results to the constructed circuit will be explained.
The last Chapter contains the detail description about conclusion and recommendation. It concludes the whole project and gives a future recommendation to make this project perfect. Also it explains the important merit of the project.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a multi port usb cell phone mobile charger" is also available. Order full work to download. Chapter two of "design and construction of a multi port usb cell phone mobile charger" consists of the literature review. In this chapter all the related work on "design and construction of a multi port usb cell phone mobile charger" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of a multi port usb cell phone mobile charger" is available. Order full work to download. Chapter three of "design and construction of a multi port usb cell phone mobile charger" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a multi port usb cell phone mobile charger" is available. Order full work to download. Chapter four of "design and construction of a multi port usb cell phone mobile charger" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and construction of a multi port usb cell phone mobile charger" is available. Order full work to download. Chapter five of "design and construction of a multi port usb cell phone mobile charger" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: