DESIGN AND CONSTRUCTION OF A PLASTIC WELDING MACHINE
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a plastic welding machine". Please, sit back and study the below research material carefully. This project topic "design and construction of a plastic welding machine" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a plastic welding machine" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a plastic welding machine" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work, "design and construction of a plastic welding machine" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a plastic welding machine" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a plastic welding machine" visible for everyone, then the complete material on "design and construction of a plastic welding machine" is to be ordered for. Happy viewing!!!
This work entitled "Design and construction of a portable plastic welding machine. The purpose of this thesis is the design and construction of portable welding machine for welding plastic, which will have the ability to be easily transferred to areas where there may be leakage or damage to plastic in order to easy, quickly and inexpensively repair the damage.
The machine should be constructed in such a way that will be operated only by one person. They will be some plastic weldings and samples will undergo a stress test in order to assess their pressure resistance and compare them with the construction of plastic resistance value.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRCT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- OBJECTIVE OF THE PROJECT
- APPLICATION OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- SCOPE OF THE PROJECT
CHAPTER TWO
LITERATURE REVIEW
2.0 LITERATURE REVIEW
2.1 OVERVIEW OF PLASTIC
2.2 DEFINITION OF PLASTIC CHAPTER THREE
2.3 REVIEW OF WELDING TECHNIQUES
2.4 OVERVIEW OF PLASTIC WELDING
CHAPTER THREE
DESIGN METHODOLOGY
3.1 MACHINE OPERATION
3.2 MACHINE COMPONENTS
3.3 SCHEMATIC DIAGRAM OF THE MACHINE
3.4 DESCRIPTION OF MACHINE COMPONENTS
3.5 CONSIDERATIONS OF PLASTIC WELDING
CHAPTER FOUR
RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE AND TESTING
4.2 ASSEMBLING OF SECTIONS
4.3 ECONOMIC OF THE PROJECT
4.4 PROJECT VIABILITY
4.5 PROJECT RELIABILITY
4.6 PROJECT MAINTAINABILITY
4.7 PROJECT EVALUATION
CHAPTER FIVE
5.0 CONCLUSIONS, RECOMMENDATION AND REFERENCES
- CONCLUSIONS
- RECOMMENDATION
5.2 REFERENCES
CHAPTER ONE
1.1 INTRODUCTION
Welding is a material joining process performed by application of heat with or without pressure and addition of filler material. The applications of welding are so varied and extensive that it would be no exaggeration to say that there is no metal industry and no branch of engineering science that does not make use of welding in one form or another. Varying from small scale industry to large scale industry and from small machines to large machineries, welding is applied everywhere.
Modern methods of welding can be classified, depending on the state of the material during welding (plastic or molten state), as follows: Plastic welding or pressure welding Fusion welding or nonpressure welding. They can also be classified, depending on the source of heat. However this work focuses on plastic welding machines.
Plastic welding is welding for semi-finished plastic materials, and is described as a process of uniting softened surfaces of materials, generally with the aid of heat (except solvent welding). Welding of thermoplastics is accomplished in three sequential stages, namely surface preparation, application of heat and pressure, and cooling. Numerous welding methods have been developed for the joining of semi-finished plastic materials. On the other hand, production of a good quality weld can not only depend on the welding methods, but also weldability of base materials. Therefore, the evaluation of weldability is of critical importance before welding operation for plastics. This Plastic Welding Machine is extensively used in different pipeline construction projects.
1.2 OBJECTIVE OF THE PROJECT
Objective of this work is to construct a portable welding machine for welding plastic, which will have the ability to be easily transferred to areas where there may be leakage or damage to plastic in order to easy, quickly and inexpensively repair the damage.
1.3 APPLICATION OF THE PROJECT
This welding machines is used for:polyethylene (PE), polypropylene (PP), polyvinyldifuoride (PVDF), polybutene (PB), and polyvnyloride (PVC) pipes and other plastic. list of materials that can be joined include: Polycarbonate, Acrylic, Nylon.
Specific applications include sealing / welding / joining of: catheter bags, medical containers, automobile remote control keys, heart pacemaker casings, syringe tamper evident joints, headlight or tail-light assemblies, pump housings, and cellular phone parts.
1.4 SIGNIFICANCE OF THE PROJECT
This welding machine has reasonable design, excellent advantages, such as hot air welding of advanced electronic control set given air temperature, welding speed. Widely used in the field of thermal plastic welding, all kinds of PVC / PE / PP / PVDF and other plastic sheet, pipe, diaphragm construction site welding material, is the bath chemical tank, plastic pipe and other materials ideal for welding.
1.5 SCOPE OF THE PROJECT
Plastic welding machine design of the study, with rich experience in research and development of plastic welding torch. on its own research, design, suitable for the production of different types of plastics welding for production High-quality products that provide the best guarantee.
With a leading domestic enterprises of plastic welding tools of production technology, is committed to the development and production of various types of plastics welding equipment and welding tools. Design professionals have made room, product quality inspection section, set up under the red pieces, cutting, welding, plating, surface treatment, assembly, electrical appliances such as shop.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a plastic welding machine" is also available. Order full work to download. Chapter two of "design and construction of a plastic welding machine" consists of the literature review. In this chapter all the related work on "design and construction of a plastic welding machine" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a plastic welding machine" is available. Order full work to download. Chapter three of "design and construction of a plastic welding machine"consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a plastic welding machine" is available. Order full work to download. Chapter four of "design and construction of a plastic welding machine" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of a plastic welding machine" is available. Order full work to download. Chapter five of "design and construction of a plastic welding machine" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
