+234 8146561114 (MTN) or
+2347015391124 (AIRTEL)

DESIGN AND CONSTRUCTION OF A PROGRAMMABLE LOAD SHEDDING WITH TIME MANAGEMENT

 

ABSTRACT

In today’s world, there is a continuous need for automatic appliances with the increase in standard of living, there is a sense of urgency for developing circuits that would ease the complexity of life. The project is designed to operate an electrical load multiple number of times as per the program. It overcomes the difficulties of switching the load ON/OFF manually. This proposed has an inbuilt real time clock (RTC) to keep tracking the time and thus to switch ON/OFF the load accordingly. Load shedding is what electric utilities do when there is a huge demand for electricity that exceeds the supply. Thus in a distribution system it needs to be precisely controlled for specific period of time. Programmable load shedding time management system is a reliable circuit that takes over the manual task of switch ON/OFF the electrical devices with respect to time. It uses real time clock (RTC) interfaced to a microcontroller of 8051 family. While the set time equals to the real time, then microcontroller gives command to the corresponding relay to turn ON the load and then another command to switch OFF as per the program. Multiple ON/OFF time entry is the biggest advantage with this project. A matrix keypad helps to enter the time.

CHAPTER ONE

  1. INTRODUCTION

The demand for electrical energy is increasing. Today over 21% of the total electrical energy generated in Nigeria is lost in transmission (4-6% ) and distribution (15-18%).
The electrical power deficit is currently about 18% in the country. Clearly, reduction in distribution losses can reduce this deficit by significantly. Its possibility to bring down the
distribution losses to a 6-8 % level in India with the help of newer technological option (including information technology) in the electrical power distribution sector which will enable better monitoring and control. The project “Electricity and load shedding monitoring” are designed such that distribution point or grids monitored and load shedding from one central location.
Load shedding in electrical supply networks is a controlled process in which the utility company drops off part of the load in order to balance the demand and the generated capacity. This is often done whenever there is excess load on the system. In standby generators, it involves disconnecting or shedding some circuits to prevent an overload condition. The main aim of this work is to build a microcontroller based device the on/off a power supply whenever there is excess load on the system.
Most common problems that we face is monitoring feeders, substation, Distribution Transformers and Distribution points from one central location.. In this project we will be making a prototype to monitor a distribution point from a central location and if any problem occurs information will be sent to the central unit. Moreover theft is also quite common at the distribution points as it is not possible for someone to monitor them24 hours. When load shedding occurs in an area the complete power to the concerned area is cut off, these include street lights, traffic signals and important utilities like hospitals, police stations & fire brigade even their power is turned OFF. In this project, this device can cut off the power to specific area by just sending an SMS to the concerned Distribution Point there by retaining power for the basic utilities.[1]

1.2                                                   AIM OF THE PROJECT
The main aim of this work is to build a microcontroller based device the on/off a power supply whenever there is excess load on the system.
1.3                                              PURPOSE OF THE PROJECT
This project is required for load shedding time management which is used when the electricity demand exceeds the supply and there comes a need for manually switching ON/OFF the electrical devices in time. However the purpose of the system is to eliminates the manual operation by automatically switching the load ON/OFF
1.4                                                 SCOPE OF THE PROJECT
Programmable load shedding time management system is a reliable circuit that takes over the manual task of switch ON/OFF the electrical devices with respect to time. It uses real time clock (RTC) interfaced to a microcontroller of 8051 family. While the set time equals to the real time, then microcontroller gives command to the corresponding relay to turn ON the load and then another command to switch OFF as per the program. Multiple ON/OFF time entry is the biggest advantage with this project. A matrix keypad helps entering the time. A 7-sement display is interfaced to the microcontroller to display time.

    1.                             SIGNIFICANCE OF THE PROJECT
  1. Prevents overloading and damage of the power generators
  2. Prevents instability and system collapse of the electrical generation and distribution systems
  3. Ensures that consumers or parts of the network have power as opposed to a total blackout.
  4. The planned schedules ensure that available capacity is shared fairly and each consumer gets power at one time or another.
  5. It serves as a warning to the utility hence forcing them to increase capacity, and efficiency so as to meet the demand.

1.7                                  DISADVANTAGES OF LOAD SHEDDING
I. One another major problem in our society created by load shedding is safety. Even though this point looks far fetched it is a dangerous problem. People in our society not only work at day but have night shifts as well. These people face serious threat from attackers at night specially walking down dark narrow lanes with no light. They can be easy prey to any thieves or robbers.
ii. The other disadvantage is that the students are going to have a hard time studying without light. Our country’s future looks dark if the students who are to lead the country in future are deprived of the basic infrastructure which helps them move forward. Load shedding not only stops them from reading and writing but blocks the path to them getting knowledge through internet, television etc.
iii. Other disadvantages can be people and hospitals having problems with their day to day activities. Offices not being able to run properly, people not being able to do their work on time. These are only branches of a huge problem our country faces. The root problem could lead to financial breakdown and an economic disbalance in the country with all the importing of electricity and everything.

  1. The utilities may not increased the output
  2. Restoring the load may cause more instabilities

1.8                       PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this study. In this chapter, the background, significance, objective limitation and problem of this study were discussed.
Chapter two is on literature review of the study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL

This material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We make abstract and chapter one visible for everyone.

All Project Topics on this site have complete 5(five) Chapters . Each Project Material include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research for your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view more our related construction (or design) pics


For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.



IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.