+234 8146561114 (MTN) or
+2347015391124 (AIRTEL)

DESIGN AND CONSTRUCTION OF A SOLAR BAG

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a solar bag" Please, sit back and study the below research material carefully. This project topic "design and construction of a solar bag" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a solar bag" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a solar bag" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

DESIGN AND CONSTRUCTION OF A SOLAR BAG

BY

---
EE/H2013/01430
DEPARTMENT OF --
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design and construction of a solar bag" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.

By
Dr. ---                                           Dr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
Dr. ---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work “design and construction of a solar bag” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “design and construction of a solar bag” visible for everyone, then the complete material on “design and construction of a solar bag” is to be ordered for. Happy viewing!!!


ABSTRACT

This paper demonstrated a step by step process in designing a solar powered charging bag that is capable of charging mobile devices efficiently. A selection of existing products available on the market were reviewed and compared to ascertain the cost, size, and output capabilities. Next, the solar cell types and regulators were compared and their respective merits were also investigated. The charging system was then designed and tested before being integrated with the solar bag. The results clearly showed that the system managed to charge the mobile phone. However, it was found that the excessive power dissipation has caused the linear regulator to generate significant heat.

TABLE OF CONTENTS

 TITLE PAGE

APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE

    •        INTRODUCTION
    •       AIM/ OBJECTIVE OF THE PROJECT
    •      SIGNIFICANCE OF THE PROJECT
    •      SCOPE  OF THE PROJECT
    •       LIMITATION OF THE PROJECT
    •       PROJECT ORGANISATION

CHAPTER TWO               

LITERATURE REVIEW
2.0      LITERATURE REVIEW
2.1      REVIEW OF THE STUDY
2.2     HISTORICAL BACKGROUND OF POWER BANK

2.3     BACKGROUND SOLAR ENERGY

2.4      HISTORICAL BACKGROUND OF SOLAR CELLS

2.5       THEORY OF SOLAR CELLS

CHAPTER THREE
DESIGN METHODOLOGY
3.0      METHODOLOGY
3.1      SYSTEM BLOCK DIAGRAM

3.2     SYSTEM CIRCUIT DIAGRAM

3.3     COMPONENT LIST

3.4     SYSTEM OPERATION

3.5    CIRCUIT DESCRIPTION

3.6      CONNECTING THE SOLAR PANEL

3.7     CONNECTING THE USB PORT

3.8      DESCRITION OF MAJOR COMPONENTS USED
CHAPTER FOUR
4.0     RESULT ANALYSIS
4.1    CONSTRUCTION PROCEDURE
4.2      SELECTION OF SOLAR CELL
4.3       TESTING OF SYSTEM OPERATION
4.4       ASSEMBLING
4.5       INTEGRATION OF SOLAR CELL
4.6       OBSERVATION

4.7         DIFFICULTIES ENCOUNTERED ON THE SYSTEM

CHAPTER FIVE

    • CONCLUSION, RECOMMENDATION AND REFERENCES
    • CONCLUSION
    • RECOMMENDATION
    • REFERENCES

CHAPTER ONE
1.0                                                        INTRODUCTION
Solar is one of the most abundant sources of renewable energy [1–4], with the potential capability of generating enough power to meet the demands of the entire planet. It was calculated theoretically that the amount of sun received on earth for one day has the capability to meet the demand of the world for more than 20 years [5]. Despite the huge potential, solar photovoltaic only provides 1.2% of the world’s electricity [6].
The harnessing of solar energy is still very much ongoing with the advancements in solar technology constantly improving. There are many applications where solar energy is utilized - from the very big application, such as generating electricity for homes and industry from solar fields, to the very small applications like powering the calculators. The possibilities are extensive.
There are a varying number of products already on the market that utilise solar energy for storing and charging devises. The products range in all shapes and sizes from fully integrated to attachable. As with Generally, the power of the solar bag was ranging from 6W to 7W with the output voltage of between 5V and 6V. The bag that come at greater cost tended to have a battery pack incorporated. The addition of this does increase the overall weight as expected.
The purpose of the paper is to develop a different prototype of solar powered charging bag that is capable of charging a mobile devices efficiently. The design would have to meet certain criteria including durability, reliability, practicality and low cost. In order for this to be achieved successfully, research, design, testing and analysis are carried out.

1.1                                                   AIM OF THE PROJECT
The main aim of this work is to build a portable, mobile and light in weight solar pack which is packaged in a bag for the purpose of charging portable rechargeable devices.


1.2                                         SIGNIFICANCE OF THE PROJECT

  • Solar bag is light-weight, hence making it easier to carry.
  • Solar bag carry a green energy source for the environment.
  • Flexible solar panels also are light and portable, as well as waterproof.

1.3                                                 SCOPE OF THE PROJECT
The solar bag usually contains a flexible monocrystalline solar panel, battery, charge controller, plugs, cords and light bulbs. It provides users with power up to 120 watt-hours/day, capable of powering electronic equipment rated up to 300 W depending on the design.


1.4                                          APPLICATION OF THE PROJECT

  • It can also be utilized in international aid, disaster relief, emergency power and field research.

 Solar bag can also power laptops for up to 3 hours.
  After an exposure of about six hours, it can power an emergency light for 14 hours.
  Solar bag can also be used to power medical equipment and humanitarian relief efforts where power from the utility grid is not available.
  These types of  bag can also be used to power cameras for use in remote areas.


1.5                                           LIMITATION OF THE PROJECT

  • It can only be recharged with solar energy through solar panel
  • The duration of the charged when in used depend on the number of cell used.
  • Using solar energy for this device means that charging the power bank during cloudy or raining time becomes a problem.

1.6                                        PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to the study. In this chapter, the background, significance, objective, limitation and scope of the study were discussed.
Chapter two is on literature review of this study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.

CHAPTER TWO: The complete chapter two of “design and construction of a solar bag” is available. Order full work to download. Chapter two of “design and construction of a solar bag” consists of the literature review. In this chapter all the related work on “design and construction of a solar bag” was reviewed.

CHAPTER THREE: The complete chapter three of “design and construction of a solar bag” is available. Order full work to download. Chapter three of “design and construction of a solar bag” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of “design and construction of a solar bag” is available. Order full work to download. Chapter four of “design and construction of a solar bag” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction of a solar bag” is available. Order full work to download. Chapter five of “design and construction of a solar bag” consist of conclusion, recommendation and references.



To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.


For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No
:+2348146561114

E
mail Address :engr4project@gmail.com


CLICK HERE FOR MORE RELATED TOPICS/MATERIAL

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.