+234 8146561114 (MTN) or
+2347015391124 (AIRTEL)

DESIGN AND CONSTRUCTION OF A SOLAR POWER BANK

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a solar power bank " Please, sit back and study the below research material carefully. This project topic "design and construction of a solar power bank" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a solar power bank " project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a solar power bank" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

DESIGN AND CONSTRUCTION OF A SOLAR POWER BANK

BY

---
EE/H2013/01430
DEPARTMENT OF ---
SCHOOL OF --
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design and construction of a solar power bank" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a B.Sc on --- has been approved.

By
Dr. ---                                                    Dr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
 Dr. ---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work “design and construction of a solar power bank” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” visible for everyone, then the complete material on “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” is to be ordered for. Happy viewing!!!


ABSTRACT

Solar Power Bank comprises of a Solar Photovoltaic Modules, Solar Power Conditioning Unit (special circuit to control power flow), battery Bank. They allow one to store electrical energy (deposit it in the bank by Solar Photovoltaic cell). Solar Photovoltaic cell which produces electricity only from solar panels and meets the load requirement and then later use it to charge up a mobile device. 

TABLE OF CONTENTS

 TITLE PAGE

APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE

    •        INTRODUCTION
    •       BACKGROUND OF THE PROJECT
    •      PROBLEM STATEMENT
    •       AIM/ OBJECTIVE OF THE PROJECT
    •      SIGNIFICANCE OF THE PROJECT
    •      SCOPE  OF THE PROJECT
    •       LIMITATION OF THE PROJECT
    •       METHODOLOGY
    •     PROJECT ORGANISATION

CHAPTER TWO               

LITERATURE REVIEW
2.0      LITERATURE REVIEW
2.1      REVIEW OF THE STUDY
2.2     HISTORICAL BACKGROUND OF POWER BANK
2.3     BACKGROUND SOLAR ENERGY
2.4      HISTORICAL BACKGROUND OF SOLAR CELLS
2.5       THEORY OF SOLAR CELLS

CHAPTER THREE
DESIGN METHODOLOGY
3.0      METHODOLOGY
3.1      SYSTEM BLOCK DIAGRAM
3.2     SYSTEM CIRCUIT DIAGRAM
3.3     COMPONENT LIST
3.4     SYSTEM OPERATION
3.5    CIRCUIT DESCRIPTION
3.6      CONNECTING THE SOLAR PANEL
3.7     CONNECTING THE USB PORT
3.8      DESCRITION OF MAJOR COMPONENTS USED

CHAPTER FOUR
4.0     RESULT ANALYSIS
4.1       CONSTRUCTION PROCEDURE
4.2      TESTING OF SYSTEM OPERATION
4.3       ASSEMBLING
4.5       OBSERVATION
4.3         DIFFICULTIES ENCOUNTERED ON THE SYSTEM

CHAPTER FIVE

    • CONCLUSION, RECOMMENDATION AND REFERENCES
    • CONCLUSION
    • RECOMMENDATION
    • REFERENCES 
CHAPTER ONE
1.0                                                         INTRODUCTION

1.1                                          BACKGROUND OF THE STUDY
A power bank is a portable battery charger, or recharger,[1][2]  which is used to put energy into a secondary cell or rechargeable battery of a cell phone by forcing an electric current through it.
This device supplies power from its built-in battery through a charging port. Power banks are popular for charging devices when little adjustment is made on it. They can also be used as a power supply for various powered devices such as lights and small fans. They usually recharge with a  power supply. The power bank includes a control circuit that both regulates charging of the battery and converts the battery voltage for the device. Some chargers for cells like 18650s and 26650 can also serve as a power bank. Although it is generally more cumbersome to carry such a charger with cells rather than a conventional power bank, this type of setup has the advantage of being able to charge cells for other uses. It also has the advantage that, when the cells are dead, they can be swapped for fresh cells for immediate use rather than having to be recharged first.

1.2                                             PROBLEM STATEMENT
Sometimes there is nothing worse than losing all the charges on your cell phone especially when you are in the middle of something very important. Usually this happens at the most inconvenient time probably when you are using your cell phone to surf the web, in the middle of a browsing or when you are desperate to send an important email or text message. Nonetheless, in this dispensation of global village, there is never a good time! If you are always on the move and you never know whether there is power supply in the place you are moving to, the very last thing you would imagine is to have your cell phone low or even empty on battery. For those who depend largely on their mobile devices, not having enough power for the battery can be a major catastrophe. How else will people reach you or how will you call/text people for business or personal reasons when your cell phone is basically useless as it has gone off on you? All these are problem to our present time, to bring this problem to an end, power bank was introduced which is a portable device that can supply power using stored energy in its built-in batteries [1,2].

1.3                                             OBJECTIVE OF THE PROJECT
The objective of the project is to design a solar dependable device that is used to recharge small devices such as cellphone when and where there is no charge to charge the device. A connector is added to complete the design. The type of connector will depend on the device to be charged. Cell phones require the Micro-USB “type B” receptacle connector. |


1.4                                         SIGNIFICANCE OF THE PROJECT
Solar Power bank serve as an ‘extra battery’ or external charger for your phone or other electronic devices. Solar Power bank helps to ensure longer hours of texting, phone calls, or web browsing using your mobile phone.

1.5                                                 SCOPE OF THE PROJECT
Cell-phone batteries often die at very inconvenient times, with no ac power outlet nearby. This device uses  standard AA batteries, which can be bought almost anywhere, to recharge cell phones and other portable devices like music players, e-book readers, and cameras.
The circuit chargers that typically come with cell phones and other portable devices charge the battery for a brief period of time. Then, they stop, check the voltage, and verify the temperature against an internal table before deciding to stop or continue the charging process. The charging regulation required by the battery is performed within the device getting charged, and this design takes advantage of that circuit.
1.6                                           LIMITATION OF THE PROJECT

  • It can only be recharged with solar energy through solar panel
  • The duration of the charged when in used depend on the number of cell used.
  • Using solar energy for this device means that charging the power bank during cloudy or raining time becomes a problem.

1.7                                         METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

  • Study of the previous work on the project so as to improve it efficiency.
  • Draw a block diagram.
  • Test for continuity of components and devices,
  • Design of the system was carried out.
  • Studying of various component used in circuit.
  • Construct of the system circuit.
  • Finally, the whole device was cased and final test was carried out.

1.8                          PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to the study. In this chapter, the background, significance, objective, limitation and scope of the study were discussed.
Chapter two is on literature review of this study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.

CHAPTER TWO: The complete chapter two of “design and construction of a solar power bank” is available. Order full work to download. Chapter two of “design and construction of a solar power bank” consists of the literature review. In this chapter all the related work on “design and construction of a solar power bank"

CHAPTER THREE: The complete chapter three of “design and construction of a solar power bank” is available. Order full work to download. Chapter three of “design and construction of a solar power bank” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a solar power bank” is available. Order full work to download. Chapter four of “design and construction of a solar power bank” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction of a solar power bank” is available. Order full work to download. Chapter five of “design and construction of a solar power bank” consist of conclusion, recommendation and references.



To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.


For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No
:+2348146561114

E
mail Address :engr4project@gmail.com


CLICK HERE FOR MORE RELATED TOPICS/MATERIAL

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.