DESIGN AND CONSTRUCTION OF A SOLAR STREET LIGHT WITH PROXIMITY SENSOR
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a solar street light with proximity sensor". Please, sit back and study the below research material carefully. This project topic (design and construction of a solar street light with proximity sensor) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a solar street light with proximity sensor" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a solar street light with proximity sensor" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF A SOLAR STREET LIGHT WITH PROXIMITY SENSOR
BY
---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of a solar street light with proximity sensor" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a solar street light with proximity sensor" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a solar street light with proximity sensor" visible for everyone, then the complete material on "design and construction of a solar street light with proximity sensor" is to be ordered for. Happy viewing!!!
This project work is titled design and construction a solar Street Light Control system with proximity sensor.A street lighting is any electrical lighting that is fixed in the road for the illumination of such road or a Street light is a raised source of light on the edge of a road or walkway, which is turned on or lit at a certain time every night using solar energy (solar panel) as the primary power supply.
An Automatic Street Light Control System is a simple and powerful concept, which uses transistor as a switch to switch ON and OFF the street light automatically. By using this system manual works are removed. It automatically switches ON lights when the sunlight goes below the visible region of our eyes. It automatically switches OFF lights under illumination by sunlight. This is done by a sensor called Light Dependant Resistor (LDR) which senses the light actually like our eyes.
The aim of the work is to build a device that controls street light automatically whenever human being or object approaches the light using proximity sensor, which is powered by photovoltaic panels that charges a rechargeable battery during the day, the battery in return will be used to powers an LED lamp during the night .
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
- BACKGROUND OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- PURPOSE OF THE PROJECT
- BENEFIT OF THE STUDY
- LIMITATION OF THE PROJECT
- APPLICATION OF THE STUDY
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- HISTORITICAL BACKGROUND OF PHOTOVOTAIC CELL
- THEORETICAL REVIEW OF SOLAR CELL
- REVIEW OF SOLAR CELL EFFICIENCY
- REVIEW OF SOLAR CELL MATERIALS
- REVIEW OF PROXIMITY SENSOR
- HISTORITICAL BACKGROUND OF PROXIMITY DETECTOR
- REVIEW OF DIFFERENT TYPES OF PROXIMITY SENSOR
- REVIEW OF IR TECHNOLOGIES FOR PROXIMITY SENSING
CHAPTER THREE
SYSTEM DESIGN
- SYSTEM BLOCK DIAGRAM
- SYSTEM WIRING DIAGRAM
- DESCRIPTION OF COMPONENTS OF SOLAR STREET LIGHT
- CONTROLLER CIRCUITS
- PROXIMITY CIRCUIT DESIGN
- DESCRIPTION OF COMPONENTS USED
CHAPTER FOUR
4.0 TEST AND RESULT ANALYSIS
- CONSTRUCTION PROCEDURE AND TESTING
- CASING AND PACKAGING
- ASSEMBLING OF SECTIONS
- COST ANALYSIS
- MOUNTING SYSTEMS
- MAINTENANCE OF STREET LIGHT
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
Recent technological innovations have paved the way to the rebirth of street lights through solar powered ones. Solar street lights are raised outdoor light sources, which are powered by PV (photovoltaic) panels. These panels are mounted on the lighting structure or connected in the pole. PV panels have arechargeable battery, providing power to the LED lamp during the entire night. Most of the solar panels automatically sense outdoor light through a light source. These can give off light on successive nights even when the sun’s energy is not available for a couple of days. LED Solar Street Light have energy using sunlight, solar panels during the day to charge the batteries, batteries provide light in the evening, without complex and expensive pipeline, adjustable lighting layout, safety and energy-saving and pollution-free, without manual operation is stable and reliable, saving electricity maintenance-free.
LED Solar Street lights to work continuously for more than 3-5 days in rainy weather, Solar Street Lighting system is consists of LED lamp, solar lamps controller, batteries (included battery incubator) and lighting poles, as well as parts. Solar cell module chosen monocrystalline or polycrystalline silicon; LED light head adopts high power brand LED as a light source; Controller placed in the battery compartment with light control, time control, overcharge protection, reverse connection protection, more advanced controller has four seasons adjusted lights, half power capabilities, intelligent charge and discharge function; Specialized battery placed on the ground or the incubator, to be used in valve-regulated lead-acid batteries, gel batteries, lithium iron aluminium batteries or batteries.
1.2 AIM OF THE PROJECT
The aim of the work is to design and construct Solar street light is raised light sources which are powered by photovoltaic panels generally mounted on the lighting structure. The photovoltaic panels charge a rechargeable battery, which powers a LED lamp during the night. Proximity Detection Sensor used in the work detect and measure reflected infrared (IR) energy to detect the presence of an object or person
2.3 OBJECTIVE OF THE PROJECT
At the end of this work, the student involved shall be able to:
- know how to build the device
- learn and explain the working principle of the device
- identify components used in this work
- interpret the circuit used.
1.4 SIGNIFICANCE OF THE PROJECT
This system turns on and turns off automatically by sensing outdoor light using a light source. Solar streetlights are designed to work throughout the night. Many can stay lit for more than one night if the sun is not available for a couple of days. Older models included lamps that were not fluorescent or LED.
As a student of electrical/electronics engineering, this work has exposed me to know the application and description of many electronics components. It also made me to know that an object can be detected by electromagnetic field without making any physical contact with the object.
1.5 PURPOSE OF THE PROJECT
The main purpose of solar street light is to give the user a compact light solution in the street during the night time, and to control the switching operation of the device without any manual operation.
1.6 BENEFIT OF THE STUDY
Due to off-grid nature of solar street lights, solar street lights incur minimal operational costs. Such lights are wireless in nature and are independent of the utility company. Compared to conventional street lights, solar street lights require almost zero maintenance. Due to the absence of external wires, these lights do not pose any threat of accidents like electrocution, strangulation and overheating. Infact, solar lights illuminate the streets throughout the night irrespective of power cuts and grid failures.
1.7 LIMITATION OF THE PROJECT
Solar street lights require higher initial investment compared to conventional street lights. This is actually the main reason why most people are having second thoughts about switching to solar street lights. They consider the money they are required to spend without realizing the long-term benefits and the longer life cycle of solar street lights.
Because these are non-wired, these can easily be stolen. The risk for theft is relatively higher because it has higher monetary value compared to regular street lights.
Snow or dust, and moisture can accumulate on horizontal PV-panels. This leads to reduced or full stoppage of energy production. This is why solar street lights need to be checked once in a while especially when placed on areas with extreme weather conditions, which can damage or shorten the life cycle of it.
Rechargeable batteries must be replaced a few times within the lifetime of the fixtures. This adds up to the total lifetime cost of the lighting system.
1.8 APPLICATION OF THE STUDY
There are three distinct main uses of street lights, each requiring different types of lights and placement. Misuse of the different types of lights can make the situation worse by compromising visibility or safety.
Beacon lights
A modest steady light at the intersection of two roads is an aid to navigation because it helps a driver see the location of a side road as they come closer to it and they can adjust their braking and know exactly where to turn if they intend to leave the main road or see vehicles or pedestrians. A beacon light's function is to say "here I am" and even a dim light provides enough contrast against the dark night to serve the purpose. To prevent the dangers caused by a car driving through a pool of light, a beacon light must never shine onto the main road, and not brightly onto the side road. In residential areas, this is usually the only appropriate lighting, and it has the bonus side effect of providing spill lighting onto any sidewalk there for the benefit of pedestrians. On Interstate highways this purpose is commonly served by placing reflectors at the sides of the road.
Street lights are not normally intended to illuminate the driving route (headlights are preferred), but to reveal signs and hazards outside of the headlights' beam. Because of the dangers discussed above, roadway lights are properly used sparingly and only when a particular situation justifies increasing the risk. This usually involves an intersection with several turning movements and much signage, situations where drivers must take in much information quickly that is not in the headlights' beam. In these situations (A freeway junction or exit ramp) the intersection may be lit so that drivers can quickly see all hazards, and a well designed plan will have gradually increasing lighting for approximately a quarter of a minute before the intersection and gradually decreasing lighting after it. The main stretches of highways remain unlighted to preserve the driver's night vision and increase the visibility of oncoming headlights. If there is a sharp curve where headlights will not illuminate the road, a light on the outside of the curve is often justified.
If it is desired to light a roadway (perhaps due to heavy and fast multi-lane traffic), to avoid the dangers of casual placement of street lights it should not be lit intermittently, as this requires repeated eye readjustment which implies eyestrain and temporary blindness when entering and leaving light pools. In this case the system is designed to eliminate the need for headlights. This is usually achieved with bright lights placed on high poles at close regular intervals so that there is consistent light along the route. The lighting goes from curb to curb.
Design and style
An LED street light is an integrated light that uses light emitting diodes (LED) as its light source. These are considered integrated lights because, in most cases, the luminaire and the fixture are not separate parts (except LEDGine-based luminaires). New in manufacturing, the LED light cluster is sealed on a panel and then assembled to the LED panel with a heat sink to become an integrated lighting fixture.
Different designs have been created that incorporate various types of LEDs into a light fixture. The current trend is to use high power 1 watt LEDs. However, some companies use low power LEDs in their products, including several low power LEDs packed together to perform the same purpose as a single high power LED. The shape of the LED street light depends on several factors, including LED configuration, the heat sink used with the LEDs and aesthetic design preference.
Heat sinks for LED street lights are similar in design to heat sinks used to cool other electronics such as computers. Heat sinks tend to have as many grooves as possible to facilitate the flow of hot air away from the LEDs. The area of heat exchange directly affects the lifespan of the LED street light.
The lifespan of an LED street light is determined by its light output compared to its original design specification. Once its brightness decreases by 30 percent, an LED street light is considered to be at the end of its life.
Most LED street lights have a lens on the LED panel, which is designed to cast its light in a rectangular pattern, an advantage compared to traditional street lights, which typically have a reflector on the back side of a high-pressure sodium lamp. In this case, much of the luminance of the light is lost and produces light pollution in the air and surrounding environment. Such street lights can also cause glare for drivers and pedestrians.
A drawback of LED focus panels is that most light is directed to the road, and less light to the footpaths and other areas.
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 HISTORITICAL BACKGROUND OF PHOTOVOTAIC CELL
The photovoltaic effect was first experimentally demonstrated by French physicist Edmond Becquerel. In 1839, at age 19, he built the world's first photovoltaic cell in his father's laboratory. Willoughby Smith first described the "Effect of Light on Selenium during the passage of an Electric Current" in a 20 February 1873 issue of Nature. In 1883 Charles Fritts built the first solid state photovoltaic cell by coating the semiconductor selenium with a thin layer of gold to form the junctions. The device was only around 1% efficient. In 1888 Russian…
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a solar street light with proximity sensor" is also available. Order full work to download. Chapter two of "design and construction of a solar street light with proximity sensor" consists of the literature review. In this chapter all the related work on "design and construction of a solar street light with proximity sensor" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a solar street light with proximity sensor" is available. Order full work to download. Chapter three of "design and construction of a solar street light with proximity sensor" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a solar street light with proximity sensor" is available. Order full work to download. Chapter four of "design and construction of a solar street light with proximity sensor" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of a solar street light with proximity sensor" is available. Order full work to download. Chapter five of "comparative analysis of bitter kola, moringa oleifera seed, and wonderful kola used for waste water treatment" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
