phonelogo+234 8146561114 or +2347015391124

DESIGN AND CONSTRUCTION OF A STANDALONE SOLAR STREET LIGHT

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a standalone solar street light". Please, sit back and study the below research material carefully. This project topic "user’s satisfaction with functionality of space in selected sport complex" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a standalone solar street light" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a standalone solar street light" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---



APPROVAL PAGE

This is to certify that the research work, "design and construction of a standalone solar street light" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "design and construction of a standalone solar street light" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a standalone solar street light" visible for everyone, then the complete material on "design and construction of a standalone solar street light" is to be ordered for. Happy viewing!!!


ABSTRACT

This project work is titled design and construction a standalone solar Street Light system. Stand-Alone PV street light System supply an alternative means of electrification. A street lighting is any electrical lighting that is fixed in the road for the illumination of such road or a Street light is a raised source of light on the edge of a road or walkway, which is turned on or lit at a certain time every night using solar energy (solar panel) as the primary power supply.
In this device, the solar energy is tapped and converted directly in to electricity by the solar panel (photovoltaic cell) which is being used to power a solar street light. The battery stores the excess solar energy during the day which the charge controller prevents the battery from overcharging and also charges the battery. This project unveils the design and construction of a solar energy street light system with dust to dawn operation with the aid of tight dependent resistor (LDR). The basic system components include a 50watt solar panel, 100Ah solar battery, 12 volt charge controller, 15watt energy saving bulb 3.5meter pole and interconnecting cables.

 

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION

    • BACKGROUND OF THE PROJECT
    • PROBLEM STATEMENT
    • AIM OF THE PROJECT
    • OBJECTIVE OF THE PROJECT
    • SIGNIFICANCE OF THE PROJECT
    • PURPOSE OF THE PROJECT
    • LIMITATION OF THE PROJECT
    • SCOPE OF THE PROJECT
    • DEFINITION OF TERMS
    • PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

    • HISTORITICAL BACKGROUND OF PHOTOVOTAIC CELL
    • THEORETICAL REVIEW OF SOLAR CELL
    • REVIEW OF SOLAR CELL EFFICIENCY
    • REVIEW OF SOLAR CELL MATERIALS
    • OVERVIEW OF LED LAMP
    • ADVANTAGES OF LED STREET LIGHTS
    • DISADVANTAGES OF LED STREET LIGHTS

CHAPTER THREE
SYSTEM DESIGN

    • SYSTEM BLOCK DIAGRAM
    • SYSTEM WIRING DIAGRAM
    • DESCRIPTION OF COMPONENTS OF SOLAR STREET LIGHT
    • CONTROLLER CIRCUITS
    • METHODS
    • DESCRIPTION OF COMPONENTS USED

CHAPTER FOUR
4.0      TEST AND RESULT ANALYSIS

    • CONSTRUCTION PROCEDURE AND TESTING
    • CASING AND PACKAGING
    • ASSEMBLING OF SECTIONS
    • RESULT AND DISCUSSION
    • MOUNTING SYSTEMS
    • MAINTENANCE OF STREET LIGHT
    • SAFETY PRECAUTION

CHAPTER FIVE

    • CONCLUSION
    • RECOMMENDATION
    • REFERENCES

 

 

 

CHAPTER ONE
1.0                                                        INTRODUCTION
1.1                                         BACKGROUND OF THE PROJECT
Recent technological innovations have paved the way to the rebirth of street lights through solar powered ones. Solar street lights are raised outdoor light sources, which are powered by PV (photovoltaic) panels. These panels are mounted on the lighting structure or connected in the pole. PV panels have a rechargeable battery, providing power to the LED lamp during the entire night. Most of the solar panels automatically sense outdoor light through a light source. These can give off light on successive nights even when the sun’s energy is not available for a couple of days. LED Solar Street Light have energy using sunlight, solar panels during the day to charge the batteries, batteries provide light in the evening, without complex and expensive pipeline, adjustable lighting layout, safety and energy-saving and pollution-free, without manual operation is stable and reliable, saving electricity maintenance-free.
Standalone Solar Street lights to work continuously for more than 3-5 days in rainy weather, Solar Street Lighting system is consists of LED lamp, solar lamps controller, batteries (included battery incubator) and lighting poles, as well as parts. Solar cell module chosen monocrystalline or polycrystalline silicon; LED light head adopts high power brand LED as a light source; Controller placed in the battery compartment with light control, time control, overcharge protection, reverse connection protection, more advanced controller has four seasons adjusted lights, half power capabilities, intelligent charge and discharge function; Specialized battery placed on the ground or the incubator, to be used in valve-regulated lead-acid batteries, gel batteries, lithium iron aluminium batteries or batteries (Scott, 2012).

1.2                                                  PROBLEM STATEMENT
Conventional street light requires constant maintenance, much external wiring, risk of electric shock and only work whenever there is power. These problems made it difficult for the users to use it and people has difficulties of late night movement. Standalone solar street light was invented to overcome this problem in that Solar street lights require much less maintenance compared to conventional street lights. Since external wires are eliminated, risk of accidents are minimized. Electricity produced from solar panels is non-pollutive.

1.3                                                   AIM OF THE PROJECT

The aim of the work is to build a self powered street light whose sources of energy is from photovoltaic panels generally mounted on the lighting structure. In standalone power supply, the photovoltaic panels charge a rechargeable battery, which powers a LED lamp during the night.
1.4                                             OBJECTIVE OF THE PROJECT
The objectives are:

  • To build a self-powered street light
  • To know how to build the device
  • To learn the working principle of the device

1.5                                         SIGNIFICANCE OF THE PROJECT
This system turns on and turns off automatically by sensing outdoor light using a light sensor (light dependent resistor). Standalone solar streetlights are designed to work throughout the night. Many can stay lit for more than one night if the sun is not available for a couple of days. This study will throw light on how solar system is installed.

1.7                                              PURPOSE OF THE PROJECT
The main purpose of standalone solar street light is to give the user a compact light solution in the street during the night time.

1.8                                           LIMITATION OF THE PROJECT
As we all know that no human effort to achieve a set of goals goes without difficulties, certain constraints were encountered in the course of carrying out this project and they are as follows:-

  • Difficulty in information collection: I found it too difficult in laying hands of useful information regarding this work and this course me to visit different libraries and internet for solution.
  • Financial Constraint:        Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet).
  • Time Constraint:   The researcher will simultaneously engage in this study with other academic work. This consequently will cut down on the time devoted for the research work.

1.9                                     SCOPE OF THE PROJECT
This project deals with the design of a standalone solar street light. This device uses panels to convert the solar power into electricity. It is also quick and easy to charge the batteries and the control is automatic. The automatic control of the device eliminates human intervention for manual switching and control of the security light.

1.10                                       METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

  • Study of the previous work on the project so as to improve it efficiency.
  • Draw a block diagram.
  • Test for continuity of components and devices,
  • Design of the device was carried out.
  • Studying of various component used in circuit.
  • Construction of the circuit was carried out. The construction of this project includes the placing of components on Vero boards, soldering and connection of components,
  • Finally, the whole device was cased and final test was carried out.

1.11                                                      DEFINITION OF TERMS
Kilowatt-hour (kWh): Standard unit for electricity.
Off grid: Completely disconnected from the electricity grid, with no access to utility-generated electricity. Homes that go off grid need to generate all of their electricity on-site.
Photovoltaic (PV): A type of device that generates electricity directly from sunlight. Solar panels are photovoltaic devices.
Power rating: Represents the theoretical power output of a solar panel in ideal conditions. While power rating is a good indicator of quality, most solar panels don’t experience ideal conditions for more than a few moments.
Solar panel efficiency: Represents how well a solar panel converts sunlight into electricity.
Solar-plus-storage: Industry term referring to a solar energy system that also includes a battery to store excess energy.
Temperature coefficient: Represents how well a solar panel can perform in high-heat conditions. As with all electronics, high heat can negatively affect solar panel performance.

1.12                                                      PROJECT ORGANISATION

The work is organized as follows: chapter one discuses the introductory part of the work,   chapter two presents the literature review of the study,  chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a standalone solar street light" is also available. Order full work to download. Chapter two of "design and construction of a standalone solar street light" consists of the literature review. In this chapter all the related work on "design and construction of a standalone solar street light" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of a standalone solar street light" is available. Order full work to download. Chapter three of "design and construction of a standalone solar street light" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a standalone solar street light" is available. Order full work to download. Chapter four of "design and construction of a standalone solar street light" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and construction of a standalone solar street light" is available. Order full work to download. Chapter five of "design and construction of a standalone solar street light" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logomyyoutubelogo.html