USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a water pump motor automatic on/off using float switch". Please, sit back and study the below research material carefully. This project topic ( design and construction of a water pump motor automatic on/off using float switch) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a water pump motor automatic on/off using float switch" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a water pump motor automatic on/off using float switch" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF A WATER PUMP MOTOR AUTOMATIC ON/OFF USING FLOAT SWITCH
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, " design and construction of a water pump motor automatic on/off using float switch" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "
design and construction of a water pump motor automatic on/off using float switch" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "
design and construction of a water pump motor automatic on/off using float switch" visible for everyone, then the complete material on "
design and construction of a water pump motor automatic on/off using float switch" is to be ordered for. Happy viewing!!!
In countries including such as Nigeria, a city water authority supplies the clean water and pumps it into large ground-level storage tanks. A resident’s water pump then pumps the water to a water tank on top of his/her house. When the water level in the ground-level storage tank becomes too low, the pump siphons air and shuts down, requiring a resident to manually prime the water pump to get it running again. Residents struggle to monitor the water level of the tanks effectively and keep the pump running properly. To remedy the issue, the Automatic Water Pump Controller (AWPC) system using float switch was built which monitors the water levels and controls the pump as necessary to prevent breakdown and maximize water storage without overfilling the rooftop tank and wasting water.
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUNDOF THE PROJECT
The project “automatic water pump control system using float switch” was designed to monitor the level of liquid in the tank thereby controlling the ON/OFF of the water pumping machine depending of the level of water in the tank. The system has an automatic pumping system attached to it so as to refill the tank once the liquid gets to the lower threshold, and OFF the pump once the liquid gets to the higher threshold. Sustainability of available water resource in many reason of the word is now a dominant issue. This problem is quietly related to poor water allocation, inefficient use, and lack of adequate and integrated water management. Water is commonly used for agriculture, industry, and domestic consumption. Therefore, efficient use and water monitoring are potential constraint for home or office water management system. Moreover, the common method of level control for home appliance is simply to start the feed pump at a low level and allow it to run until a higher water level is reached in the water tank. This water level control, controls monitor and maintain the water level in the overhead tank and ensures the continuous flow of water round the clock without the stress of going to switch the pump ON or OFF thereby saving time, energy, water, and prevent the pump from overworking Besides this, liquid level control systems are widely used for monitoring of liquid levels in reservoirs, silos. Proper monitoring is needed to ensure water sustainability is actually being reached with disbursement linked to sensing and automation. This device was build using a float switch. The float switch functions as a sensor which is used for water pump motor automatic on/off.
1.2 PROBLEM STATEMENT
This project is carried out so as to provide a means of reducing stress involved in fetching water, wastage of water and flooding which may result from overfilling of the tank and eventually reduce to minimum, if not eliminating damages to the pumping machine.
1.3 AIMS OF THE PROJECT
The main aim of this work is to build a controlling circuit that controls the water pump motor. The motor gets automatically switch ON when water in the overhead tank (OHT) falls below the lower limit and OFF when the water gets to the upper limit. In this project float switch are place at two different level of the tank (upper and lower level of the tank)
1.4 OBJECTIVES OF THE PROJECT
The objective of which the designed device is expected to accomplish is to build an automatic water pump controller using float switch. Other objectives are:
- To design an automatic water monitoring system.
- To incorporate an interactive medium between the end user and the machine
- To prevent over labor of the pumping machine and prevent it from getting bad
- To avoid wastage of water
- Since the demand of electricity is very high, automatic water level control saves energy
1.5 PURPOSE OF THE PROJECT
The main purpose of designing this device is to avoid water wastage in a tank, overuse of water pump and to reduce the labour of the user.
1.6 JUSTIFICATIONOF THE PROJECT
Automatic water level controller using float switch came into existence because of human error and inconsistence that is associated with manually operated water pumping machine. This is because it takes time for individual who is manually operating the water pump to turn off the pumping machine and this may cause water spillage and at times the individual might not know that the water level has drop so low until the tank is completely empty. This was the problem that leads to the development of the ideal of an automatic water level control and automatic pump short down.
1.7 ADVANTAGES OF WATER LEVEL CONTROLLER
Advantages of automatic water pump ON and OFF using float switch are as follows:
- Suitability: These water level controllers are ideally suited for normal water as well as for ultra low conductivity water with less than 1 micro/moh.
- Easy to Operate: these systems come fitted with sensitivity setting which can be provided externally on a dial or with internal settings.
- Settings: It is equipped with technology which works on low or high sensitivity settings on the same machine and thereby saves costs of buying and using two different machines.
- Materials of Construction: this water control system is protected the against corrosion.
- Safety : This system is highly insulated, leakage proof and works without creating any noise.
- Automatic Water Level Controller (AWLC) will automatically START the pump set as soon as the water level falls below the predetermined level (usually kept half or 2/3rd tank) and shall SWITCH OFF the pump set as soon as tank is full or water level in the lower tank is at below minimum level.
- Save water: The system ensures no overflows or dry running of pump there by saves electricity and water
- Save electricity: Consume very little energy, ideal for continuous operation.
1.7 APPLICATION OF THE PROJECT
They are useful devices and play an important role in various industries such as automobile, irrigation, and also at homes, or wherever water is pump either underground or overhead.
1.8 SCOPE OF THE PROJECT
The project was design to automatically control the pump which ensures constant reserve of water in the reservoir. The scope of the design was keep concise and simple to in other not to introduce unnecessary complexities and render it generally uncomfortable. The system does not have attached complex peripheral device which though impossible for the detail printable information has been excluded for reasons of affordability material of low range and less accurate performances as opposed to a well built automatic water pump was used to achieve this aim, the automatic water level controller detect and control the water in the tank using two float switch as the sensor.
This water controller will give you a heads-up the instant over-head tank and underground tank is full or goes below the required level. In this work, automatic water pump controller circuit controls the water pump motor. The motor gets automatically switched ON when water in the overhead tank falls below the lower limit. Similarly, it gets switched OFF when the tank is filled up.
1.10 LIMITATION OF THE PROJECT
The biggest problem experience during the course of this project is difficulties in finding the design of the project, secondly sourcing of material and component I used for the project were difficult to find such as the float switch.
1.11 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this study. In this chapter, the background, aim, purpose, application, justification, significance, objective limitation and problem of this work was discussed.
Chapter two is on literature review. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of " design and construction of a water pump motor automatic on/off using float switch" is also available. Order full work to download. Chapter two of " design and construction of a water pump motor automatic on/off using float switch" consists of the literature review. In this chapter all the related work on " design and construction of a water pump motor automatic on/off using float switch" was reviewed.
CHAPTER THREE: The complete chapter three of " design and construction of a water pump motor automatic on/off using float switch" is available. Order full work to download. Chapter three of " design and construction of a water pump motor automatic on/off using float switch" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of " design and construction of a water pump motor automatic on/off using float switch" is available. Order full work to download. Chapter four of " design and construction of a water pump motor automatic on/off using float switch" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a " design and construction of a water pump motor automatic on/off using float switch" is available. Order full work to download. Chapter five of " design and construction of a water pump motor automatic on/off using float switch" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA: