USER'S INSTRUCTIONS: The project work you are about to view is on design and construction of ac generator using pulse motor. Please, sit back and study the below research material carefully. This project topic (design and construction of ac generator using pulse motor) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of ac generator using pulse motor" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of ac generator using pulse motor" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF AC GENERATOR USING PULSE MOTOR
BY
---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, design and construction of ac generator using pulse motor by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of ac generator using pulse motor" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of ac generator using pulse motor: visible for everyone, then the complete material on "design and construction of ac generator using pulse motor" is to be ordered for. Happy viewing!!!
This project is on the design and construction of pulse motor free energy generator (PMFEG). A pulsed motor, unlike normal A/C or D/C types uses short pulses of current to drive the motor, which makes it spin. This system is a new idea to generate electricity without making use of any common external sources. PMFEG conserves the input energy at high efficiency and store it and feed it back to the system and thus produces a mechanical output which can be used as a primemover. The input is given to the system using a battery, it generates pulsed and mechanical output which can be used to power an inverter that produces an ac voltage.
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF STUDY
Powering of devices consumes huge amount of energy, however this amount of energy is being reduced as the technology improves. A major limiting factor is that currently (2017) there is inadequate energy infrastructure for long routes.
The objective of the project is to make a Pulse Motor Free Energy Generator which can be used to power other devices.
It is possible to draw substantial amount of energy from the local environment and use that energy to power other devices. Not only that, but when this method of powering devices is used, the appliances gradually get conditioned to this form of non- conventional energy and their capacity for doing work increases.
Any generator requires a prime mover (such as diesel engines, water turbines etc.) to operate, that is, an external source of input is required to give an output. This external source of energy is deteriorating day by day due to excessive use
.More over this input energy once used cannot be regained back and an output that is much smaller than input is usually obtained.
This project is a new idea to generate electricity without making use of any external source. That is, we have developed a way to conserve the input energy completely and store it and feed it back to the system and thus produce a mechanical output which can be used as a prime mover. A charged battery is necessary for starting the machine. Ones it is started the power from the machine is fed back to recharge the battery and this process continuous. Hence, the output is far greater than the input provided which results in great efficiency.
Two different kinds of energies involved in the process can be carefully distinguished and manipulated for practical advantages in powering various loads. The Pulse Motor Free Energy Generator is a decent, powerful and well-looking topology of a free energy generator.
Free energy has two meanings:
- Energy that can be obtained from a device at low cost.
- More output energy that appears to be available than input energy.
The Law of Conservation of Energy is generally thought to be correct when it states that more energy cannot be taken out of any system than is put into that system. However, that does not mean that we cannot get more energy out of a system than we put into it. The Pulse Motor Free Energy Generator is a device that demonstrates this free energy concept on a small scale .It will generate the required electric power with less input. The main aim of this work is to use pulse motor to generate a 220v ac.
1.2 PROBLEM STATEMENT
In the past, energy generation depends fully on fossil fuels which produces carbon monoxide and also have higher cost power generation bill. Because of these disadvantages, researchers came out with free energy generation. Free energy sources of energy are now a major concern worldwide as replacement to the high demand of fossil fuels. This energy becomes free only at a point after which we don’t have to pay for power generation after commissioning the unit. By using the pulse motor continuous motion (Energy) is generated.
1.3 AIM OF THE STUDY
The aim of this work is to build a system that uses pulse motor to generate 220v alternating current.
1.4 OBJESCTIVE OF THE STUDY
The objective of the study is to provide a system for driving a pulse motor which eliminates undesirable step motions at low speeds, compensates insufficient torque due to the inductance of the exciting coils at high speeds, and improves the driving characteristics of the motor at both high and low speeds. The other objective of the study is to provide a system for driving a pulse motor which provides poly-phase trapezoid exciting signals required for continuous rotation of the pulse motor.
1.5 SCOPE OF THE STUDY
The pulse motor is driven by precise synchronization with command pulses. Therefore, the pulse motor can constitute a high accuracy servo-system with open loops. However, because the revolution of the pulse motor is carried out stepwise, the discontinuity of revolutions is remarkable especially when the motor is driven at low speeds. Further, as the pulse motor is driven by pulses, the driving torque at high speeds becomes insufficient, because inductances of the exciting coils deteriorate the rising time of the exciting current.
SIGNIFICANCE OF THE STUDY
The output appears to be far greater than the input provided which results in greater efficiency. Hence the pulse motor free energy generator is a decent, powerful, low cost, high efficient and well-looking topology of a free energy generator, which can be used to power an inerter that powers other ac appliances.
1.6 METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:
- Study of the previous work on the project so as to improve it efficiency.
- Draw a block diagram.
- Test for continuity of components and devices,
- Design and calculation for the work was carried out.
- Studying of various component used in circuit.
- The setup of the system circuit.
- Finally, the whole device was cased and final test was carried out.
1.7 PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of design and construction of ac generator using pulse motor is also available. Order full work to download. Chapter two of design and construction of ac generator using pulse motor consists of the literature review. In this chapter all the related work on design and construction of ac generator using pulse motor was reviewed.
CHAPTER THREE: The complete chapter three of design and construction of ac generator using pulse motor is available. Order full work to download. Chapter three of design and construction of ac generator using pulse motor consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of design and construction of ac generator using pulse motor is available. Order full work to download. Chapter four of design and construction of ac generator using pulse motor consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of ac generator using pulse motor is available. Order full work to download. Chapter five of design and construction of ac generator using pulse motor consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
