USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an arduino based anti-rain sensing window". Please, sit back and study the below research material carefully. This project topic "design and construction of an arduino based anti-rain sensing window" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an arduino based anti-rain sensing window" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an arduino based anti-rain sensing window" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of an arduino based anti-rain sensing window" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of an arduino based anti-rain sensing window" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of an arduino based anti-rain sensing window" visible for everyone, then the complete material on "design and construction of an arduino based anti-rain sensing window" is to be ordered for. Happy viewing!!!

---

This work is on arduino based anti - rain water sensing window.  This device was built to protect the interior of houses as it works automatically by sensing the water. It is particularly very helpful device to use in rainy season. The concept of sensing rain water to close the window is not new. It has been developed to use in the automobile sector. But this invention can be used successfully for domestic purpose. This system can evaluate whether the water particles are contracting with the window or not and sensing this it will close automatically to protect the interior of the house.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

• PROBLEM STATEMENT
• AIM/OBJECTIVE OF THE PROJECT
• APPLICATION OF THE PROJECT
• SIGNIFICANCE OF THE PROJECT
• LIMITATION OF THE PROJECT
• METHODOLOGY
• PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

• OVEVIEW OF THE STUDY
• REVIEW OF THE RELATED STUDIES
• REVIEW OF WATER SENSOR

CHAPTER THREE
METHODOLOGY

• INTRODUCTION
• SYSTEM BLOCK DIAGRAM
• HARDWARE DESIGN
• PROTOTYPE IMPLEMENTATION

       
CHAPTER FOUR
RESULT ANALYSIS

• CONSTRUCTION PROCEDURE AND TESTING
• CASING AND PACKAGING
• ASSEMBLING OF SECTIONS
• INSTALLATION OF THE COMPLETED DESIGN
• PROBLEM ENCOUNTERED

CHAPTER FIVE

• CONCLUSION
• RECOMMENDATION
• REFERENCES

 

CHAPTER ONE
1.0                                                        INTRODUCTION
1.1                                           BACKGROUND OF THE STUDY
Nowadays, technology has make life easier and comfortable. Those equipments are related with different engineering field (e.g. electrical, mechanical etc.) In order to protect the household in rainy season, this device has been developed. The field of this work is mechatronics, which is a combination of mechanical and electronics has had great advancement in the past few years. Mechatronics is implementing in this development to construct an automatic controlled commercial window. Hashim et al. [1] tried to develop a new wiper system to wipe rain water from vehicle’s windscreen. In older system, wiper was used to control manually and the process of pulling up the wiper was quite difficult. So, objective of their work was to modify the system by providing automatic wiping system. They developed an automatic control system by using a Peripheral interface controller and water sensor. Their system could manage to achieve the aim as it could remove rain water automatically from outside the car. The rain sensing automatic power window has a rain sensor, a motor operating circuit, a pair of motors and a driver mechanism for sliding type windows. Powered by 12V DC power from a transformer, motors have enough torque to move the windows back and forth as required. When rain falls on the sensor, it sends signals to the circuit. The microcontroller is programmed which acts as a relay for the circuit that sends signal to the motor driver which gives power to the motors. The windows are sliding windows with smooth bearings to reduce drag and friction for proper sliding movement.
The aim of this project was to build an anti-rain sensing automatic window mechanism for house hold. This project has been done derived for introducing anti - rain sensing windows of luxury cars and has been modified for application in commercial house window. The same principle works for both.

1.2                                                  PROBLEM STATEMENT
Traditionally, window of a building or house is operated by the occupant whenever it is raining; this calls for an attention and involves labour. This invention came to solve this problem which automatically closes a window whenever rain drops on the sensor.

1.3                                             OBJECTIVE OF THE PROJECT
This objective of this work is to build a rain controlled automatic window open and close device that automatically closes a window during the time of rainfall and vice-versa.

1.4                                       APPLICATIONS OF THE PROJECT
Apartfrom using this device at home, this device can also be used in the following places:

• It is used in four wheeler 
• It is used in aircraft
• It is used in train 
• It is used in six wheeler

1.5                                         SIGNIFICANCE OF THE PROJECT
This system reduces cumbersome closing and opening operation and improves occupant’s level of comfort.. Other significance includes:

• Low cost automation project.
• Free from wear adjustment.
• Less power consumption.
• Operating principle is very easy Installation is simple.
• It is possible to operate manually/automatically by providing On/Off switch

Sensor cost is very low due to the use of conductive sensor.

1.6                                    LIMITATION OF THE PROJECT
Additional cost is required incase optical sensor is used. This system applied in the case of water falling on the window only.

1.7                                                        METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

• Study of the previous work on the project so as to improve it efficiency.
• Draw a block diagram.
• Test for continuity of components and devices,
• Design and calculation for the device was carried out.
• Studying of various component used in circuit.
• Construction of the circuit was carried out.
• Finally, the whole device was cased and final test was carried out.

1.8                                                         PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work,   chapter two presents the literature review of the study,  chapter three describes the methods applied,  chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of an arduino based anti-rain sensing window" is also available. Order full work to download. Chapter two of "design and construction of an arduino based anti-rain sensing window" consists of the literature review. In this chapter all the related work on "design and construction of an arduino based anti-rain sensing window" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of an arduino based anti-rain sensing window" is available. Order full work to download. Chapter three of "design and construction of an arduino based anti-rain sensing window" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of an arduino based anti-rain sensing window" is available. Order full work to download. Chapter four of "design and construction of an arduino based anti-rain sensing window" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and construction of an arduino based anti-rain sensing window" is available. Order full work to download. Chapter five of "design and construction of an arduino based anti-rain sensing window" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: