DESIGN AND CONSTRUCTION OF AN ARDUINO BASED DC MOTOR SPEED CONTROLLER WITH LCD DISPLAY
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an arduino based dc motor speed controller with lcd display". Please, sit back and study the below research material carefully. This project topic"design and construction of an arduino based dc motor speed controller with lcd display"have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this"design and construction of an arduino based dc motor speed controller with lcd display" project research material is to reduce the stress of moving from one school library to another all in the name of searching for"design and construction of an arduino based dc motor speed controller with lcd display"research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work,"design and construction of an arduino based dc motor speed controller with lcd display"by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work"design and construction of an arduino based dc motor speed controller with lcd display"research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of"design and construction of an arduino based dc motor speed controller with lcd display"visible for everyone, then the complete material on"design and construction of an arduino based dc motor speed controller with lcd display"is to be ordered for. Happy viewing!!!
DC motors are widely used in industries because of its versatile characteristics and because of power electronics devices its controlling is becoming sophisticated and precise, but on the other hand because of the power electronics devices power factor and total harmonics distortion problem is becoming more prominent. In this paper DC motor control methodology is proposed which includes an Arduino UNO which control dc motor speed using PWM (Pulse Width Modulation) concept. This feature is enabled in UNO to get variable voltage over constant voltage.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- AIM AND OBJECTIVES OF THE PROJECT
- SCOPE OF THE PROJECT
- LIMITATION OF THE PROJECT
- APPLICATION OF THE PROJECT
- PURPOSE OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PROJECT WORK ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF DC MOTOR
- REVIEW OF DIFFERENT TYPES DC MOTOR
- PRINCIPLE OF DC MOTOR
- DESCRIPTION OF A DC MOTOR
- REVIEW OF RELATED STUDIES
CHAPTER THREE
SYSTEM DESIGN METHODOLOGY
- SYSTEM BLOCK DIAGRAM
- COMPONENTS LIST
- CIRCUIT DESCRIPTION
- PROGRAM CODE
CHAPTER FOUR
TEST AND RESULT ANALYSIS
- INSTALLATION OF THE COMPLET DESIGN
- CONSTRUCTION PROCEDURE AND TESTING
- CASING AND PACKAGING
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- PROBLEM ENCOUNTERED
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Because of low cost, less complex control structure and wide range of speed and torque, DC motor are popular in industry. Available methods of speed control of DC drives are field control, armature control and armature resistance control methods [Christiansen, 2005].
DC Motors are found everywhere: electronics, toys, fans, tools, discs, pumps etc. DC Motor is an actuator that converts the DC supply to rotation or movement.
There are different types of DC motors: Brushed DC motor, Brushless DC motor, Geared DC motor, Servo motor, Stepper motor and DC Linear Actuator.
Different types of motors are used in different applications like Robotics, precision positioning, industrial automation etc.
Generally, when a DC motor is associated with any microcontroller based system, it is often connected using a Motor Driver IC. A Motor Driver IC provides the necessary current for the motor to run. It can also control the direction of the rotation.
In this project, an Arduino based speed and direction control of DC motor without using Motor Driver IC is designed.
1.2 AIM AND OBJECTIVE OF THE PROJECT
The main aim of this work is to design a device that uses a arduino to control the speed of a dc motor. The objectives are:
- To build an arduino based speed and direction control of DC motor without using Motor Driver IC is designed.
- To increase efficiency
- To program an arduino to produce Pulse Width Modulation.
1.3 SCOPE OF THE PROJECT
The scope of this work focused on the interface of a DC motor to Arduino UNO and control it's speed using PWM (Pulse Width Modulation) concept. This feature is enabled in UNO to get variable voltage over constant voltage.
1.4 LIMITATION OF THE PROJECT
Drawback of this method of dc motor speed control is that they are not able to control the motor speed smoothly at lower levels, and as the desired speed is decreased, the torque of the motor also decreases proportionately. Due to this, at any unpredictable point the motor may just halt very abruptly. Also, during power ON, the motor may just not start up at lower speed settings and may require an initial boost by increasing the setting. Such situations are pretty undesirable and do not constitute an ideal speed control.
1.5 APPLICATION OF THE PROJECT
This device is mostly use in controlling the movement and speed of other devices in industries such as in conveyors.
1.6 PURPOSE OF THE PROJECT
The purpose of a motor speed control is to take a signal representing the demanded speed and drive the motor at that speed.
1.7 ADVANTAGES OF THE PROJECT
This work is a Simple control of motor speed, it has:
- High reliability and
- Low initial cost of production
1.8 PROJECT WORK ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.
CHAPTER FIVE
5.1 CONCLUSION
This paper proposes an inexpensive and compact model of motor control using arduino. Depending upon pre-determined data the signals from arduino are conditioned and corresponding output pins are checked for correctness The system that has been implemented has shown considerable output that matched our requirement.
The project has been successfully completed and the main objective of emulating a dc motor control on arduino controller has been achieved.
5.2 RECOMMENDATION
This control system is recommended for every electronics laboratories, and industries to aid those working or living in those places when it comes to repairing their equipments. This control system has to be perceived by the society and the world at large as a necessary and vital technological upgrade.
While working on this design, at some point in time we were carried away by the fact that our project is working as desired but on further thinking, we thought about the fact that our control system should working independently on its own when it comes to the power supply unit, that the system get its power from the public power supply system which is well known that it is not stable, so on this note , we will advice any further work on this control system to have its power supply independent on its own or better still use rechargeable batteries or solar if possible.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of"design and construction of an arduino based dc motor speed controller with lcd display" is also available. Order full work to download. Chapter two of"design and construction of an arduino based dc motor speed controller with lcd display"consists of the literature review. In this chapter all the related work on"design and construction of an arduino based dc motor speed controller with lcd display"was reviewed.
CHAPTER THREE: The complete chapter three of"design and construction of an arduino based dc motor speed controller with lcd display"is available. Order full work to download. Chapter three of"design and construction of an arduino based dc motor speed controller with lcd display"consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of"design and construction of an arduino based dc motor speed controller with lcd display"is available. Order full work to download. Chapter four of"design and construction of an arduino based dc motor speed controller with lcd display"consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of"design and construction of an arduino based dc motor speed controller with lcd display"is available. Order full work to download. Chapter five of"design and construction of an arduino based dc motor speed controller with lcd display"consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
