phonelogo+234 8146561114 or +2347015391124
DESIGN AND CONSTRUCTION OF AN ARDUINO BASED DUAL AXIS SOLAR TRACKING SYSTEM

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an arduino based dual axis solar tracking system". Please, sit back and study the below research material carefully. This project topic "design and construction of an arduino based dual axis solar tracking system" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an arduino based dual axis solar tracking system" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an arduino based dual axis solar tracking system" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design and construction of an arduino based dual axis solar tracking system" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "design and construction of an arduino based dual axis solar tracking system" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of an arduino based dual axis solar tracking system"visible for everyone, then the complete material on "design and construction of an arduino based dual axis solar tracking system" is to be ordered for. Happy viewing!!!


ABSTRACT

This work is on a dual axis solar tracking system. The altitude angle and azimuth angle of the sun are changing all the time. The dual-axis tracking device tracks the sun to collect more solar energy. A dual-axis tracker can increase energy by tracking sun rays from switching solar panel in various directions. This solar panel can rotate in all directions. The system setup consists of a mechanical mechanism to tilt the flat PV panel towards the Sun. This mechanism is derived by DC motors having a high reduction ratio. Voltage supplies to these motors are controlled by the LDR (Light Dependent Registers) sensors by the means of electronic circuits. The energy consumed by the tracking system is very less. The cost of the mechanical parts and electronic components are very less.
The device was first built on a breadboard which is later transfer to vero board and soldered. The device was completely build and coupled, the result during the test shows that the device was able to respond to its operation by rotating according to the direction of the sun.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0      INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

    1. STATEMENT OF THE PROBLEM
    2. AIM AND OBJECTIVES OF THE PROJECT
    3. SCOPE OF THE PROJECT
    4. SIGNIFICANCE OF THE PROJECT
    5. PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

    1. BBACKGROUD LITERATURE SURVEY OF THE STUDY
    2. REVIEW OF THE PAST WORK ON SOLAR TRACKING SYSTEM
    3. THEORETICAL FUNDAMENTALS
    4. COMPONENTS OF SOLAR TRACKING SYSTEMS

CHAPTER THREE
3.0     CONSTRUCTION METHODOLOGY
3.1      SYSTEM BLOCK DIAGRAM
3.2      MATERIALS USED

    1.      PRINCIPLE OF OPERATION
    2.      CONSTRUCTION
    3.     CALIBRATION OF THE SETUP
    4.    TESTING/WORKING OF THE SETUP

CHAPTER FOUR

    1. RESULTS

CHAPTER FIVE

    1. SUMMARY
    2. CONCLUSION
    3. RECOMMENDATION

REFERENCES

CHAPTER ON

1.1                                                    BACKGROUND OF THE STUDY

Energy is required for the different applications in our daily life. There are so many resources of power generation. 85% of power is produced from fossil fuels (Anuraj & Gandhi, 2014). Due to the depletion of the fossil fuel, renewable energy resources are required. Wind energy, geothermal energy, tidal energy and solar energy resources are some of the most efficient renewable energy resources. Solar energy can be converted in to two forms of energy, i.e. thermal energy and electrical energy. These can be achieved by using some instruments. Solar energy can be converted into electrical energy by using PV (photovoltaic) cells. Rays from the Sun light falls on the PV panel, which generates DC power. This DC power has a direct correlation with the intensity of the light incident on panel. And the intensity depends on the angle of incidence between incoming light and a flat photovoltaic (PV) panel according to Anuraj et al. (2014). A tracking system can keep the angle of incidence equal to 0. Sun tracking systems can increase the power output of solar power plants by 25% to 40%, depending on the geographic location. A single axis tracker can increase power output by 26%, while a dual axis tracker increases power by 32% (Deb & Roy, 2012). Single axis trackers follow the Sun from east to west, while dual axis trackers track the Sun by altitude (up/down), since the Sun moves across the sky throughout the day. Mousazadeh et al. (2009) calculated that the amount of power gained by tracking can come close to an ideal 57% (Mousazadeh et al., 2009). Tracking systems compose of mechanical mechanism and electronic sensors. Mechanical mechanism rotates the flat panel and this rotation is controlled by electronic sensors. The controlling process can be classified into two processes, namely passive control unit (Arsalan, 2013) and electro-optical control unit. The passive control unit is a system conducted without any electronic device. The electro optical control unit uses solar detecting devices which are sensitive to solar radiance photo sensors (LDR). Third controlling process is used in this work.

1.2                                STATEMENT OF THE PROBLEM
One of the major problems facing solar energy systems is the efficiency as the sun moves on the celestial sphere, and this makes it difficult to achieve higher power output from the solar panel. In other to solve this problem, a solar tracker was built. Solar tracker is a device that tracks the position of the sun and set the solar energy conversion system focusing normal to the sun beams. A single axis tracker was first built which was only able to increase power output by 26% due to the fact that it Single axis trackers follow the Sun from east to west (Deb & Roy, 2012). This paper presents a design focused on harnessing the maximum available solar radiation using dual-axis tracking mechanism. The tracking mechanism is designed to focus the solar conversion system perpendicular to the rays of the sun (sun beams) at all time of the day relative to the position of the sun in the sky dome.

1.3                                     AIM AND OBJECTIVES OF THE STUDY
The aim of this study is to build an intelligent dual-axis solar tracking device for solar system usage. The objectives of the work are:

  1. To fabricate a solar tracking device with dual actuator, which one of the actuators tracks the east to west motion of the sun while the second linear actuator tracks the seasonal motion/daily altitude of the sun
  2. To harness maximum solar energy
  3. To provide a stable electric power supply using solar energy.

1.4                                            SCOPE OF THE STUDY
 The scope of this work covers building a dual axis solar tracking system using two linear actuator .The driving mechanism for the motion are two direct current linear actuators of 12V each, which one of the actuators tracks the east to west motion of the sun while the second linear actuator tracks the seasonal motion/daily altitude of the sun. The main task of the tracking mechanism is to focus solar energy conversion system perpendicular to the sun to maximize the absorbed solar radiation and minimize the energy consumption for tracking system. The movement of the sun on the celestial sphere was the bases of the tracking mechanisms angles design.

1.5                                  SIGNIFICANCE OF THE STUDY
To the country, this study will serve as means of ensuring a steady power supply which will help the country (Nigeria) to be able to grow its economy, and attain its Millennium Development Goals (MDGs).
To the student, this study will help the student involved becoming familiar with solar energy generation and also help him to understand how he can increase the power of solar energy by electromechanical means.


CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of an arduino based dual axis solar tracking system" is also available. Order full work to download. Chapter two of "design and construction of an arduino based dual axis solar tracking system" consists of the literature review. In this chapter all the related work on "design and construction of an arduino based dual axis solar tracking system" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of an arduino based dual axis solar tracking system" is available. Order full work to download. Chapter three of "design and construction of an arduino based dual axis solar tracking system" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of an arduino based dual axis solar tracking system" is available. Order full work to download. Chapter four of "design and construction of an arduino based dual axis solar tracking system" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and construction of an arduino based dual axis solar tracking system" is available. Order full work to download. Chapter five of "design and construction of an arduino based dual axis solar tracking system" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logomyyoutubelogo.html