phonelogo+234 8146561114 or +2347015391124

DESIGN AND CONSTRUCTION OF AN ARDUINO BASED WIRELESS DOOR BELL

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an arduino based wireless door bell" . Please, sit back and study the below research material carefully. This project topic "design and construction of an arduino based wireless door bell" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an arduino based wireless door bell" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an arduino based wireless door bell" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design and construction of an arduino based wireless door bell" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "design and construction of an arduino based wireless door bell" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of an arduino based wireless door bell" visible for everyone, then the complete material on "design and construction of an arduino based wireless door bell" is to be ordered for. Happy viewing!!!


ABSTRACT

Today the traditional wired type of doorbells are gradually getting obsolete and are being replaced by the advanced wireless type of doorbells that are easier to install due to their hassle free set-ups. Wireless doorbell system generally comprises at least one RF transmitter powered by a battery or other power source, such as existing electrical wiring, and a RF receiver. In response to the depression of a button or other activating means on the transmitter, an electrical circuit is completed within the transmitter which energizes an oscillator or other means for generating a RF signal. The generated RF signal is then, with the aid of an antenna, transmitted a certain distance for reception by the receiver. The receiver alerts, for example, a homeowner that the doorbell button has been depressed by producing an audible signal, such as a tone or melody, upon detecting the transmitted RF signal. In this project, an Arduino based Wireless Doorbell was built. The project is implemented using RF Module for wireless communication and also an Arduino UNO board to analyze the data.

TABLE OF CONTENTS

 TITLE PAGE

APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE

    • INTRODUCTION
    • BACKGROUND OF THE PROJECT
    • PROBLEM STATEMENT
    • OBJECTIVE OF THE PROJECT
    • SCOPE OF THE PROJECT
    • SIGNIFICANCE OF THE PROJECT
    • LIMITATION/ PROBLEM OF THE PROJECT
    • APPLICATIONS OF THE PROJECT
    • METHODOLOGY
    • PROJECT ORGANISATION

CHAPTER TWO

2.0      LITERATURE REVIEW
2.1      HISTORICAL BACKGROUND OF THE STUDY
2.2        REVIEW OF DIFFERENT TYPES OF DOOR BELL
2.3      USES OF WIRELESS TECHNOLOGIES
2.4      FUTURE OF WIRELESS TECHNOLOGIES

CHAPTER THREE
3.0       DESIGN METHODOLOGY
3.1      SYSTEM BLOCK DIAGRAM
3.2     SYSTEM OPERATION 
3.3     SYSTEM WORKING PRINCIPLE
3.4    SYSTEM CIRCUIT DIAGRAM
3.5    ELECTRONIC COMPONENTS

CHAPTER FOUR

4.0     RESULT ANALYSIS
4.1      CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
4.2     CASING AND PACKAGING
4.3      ASSEMBLING OF SECTIONS
4.4     TESTING OF SYSTEM OPERATION

CHAPTER FIVE

5.1      CONCLUSIONS
5.2      REFERENCES                       
3.3     RECOMMENDATION 

 

CHAPTER ONE
1.0                                                        INTRODUCTION
A doorbell is a signaling device typically placed near an entry door to a building. When a visitor presses a button the bell rings inside the building, alerting the occupant to the presence of the visitor. Although the first doorbells were mechanical, activated by pulling a cord, modern doorbells are electric — they are actuated by an electric switch [1].
However, this work is wireless doorbell which is the modification of wired doorbell. Wireless doorbell systems that do not require wall wiring have become popular. The doorbell button contains a built-in radio transmitter powered by a battery. When the button is pushed, the transmitter sends a radio signal to the receiver unit, which is plugged into a wall outlet inside the building. When the radio signal is detected by the receiver [3], it activates a sound chip that plays the sound of gongs through a loudspeaker—either a two-note "ding-dong" sound or a longer chime sequence such as Westminster Quarters. To avoid interference by nearby wireless doorbells on the same radio frequency, the units can usually be set by the owner to different radio channels [2].
In larger metropolitan cities, a trend has developed over the past decade that uses telephone technology to wirelessly signal doorbells as well as to answer the doors and remotely release electric strikes. In many cities throughout the world, this is the predominant form of doorbell signalling.
A typical wireless doorbell system generally comprises at least one RF transmitter powered by a battery or other power source, such as existing electrical wiring, and a RF receiver. In response to the depression of a button or other activating means on the transmitter, an electrical circuit is completed within the transmitter which energizes an oscillator or other means for generating a RF signal. The generated RF signal is then, with the aid of an antenna, transmitted a certain distance for reception by the receiver. The receiver alerts, for example, a homeowner that the doorbell button has been depressed by producing an audible signal, such as a tone or melody, upon detecting the transmitted RF signal [2].
In this project, we have designed an Arduino based Wireless Doorbell using simple hardware. The project is implemented using RF Module for wireless communication and also an Arduino UNO board to analyze the data.

1.1                                         BACKGROUND OF THE PROJECT
Today the traditional wired type of doorbells are gradually getting obsolete and are being replaced by the advanced wireless type of doorbells that are easier to install due to their hassle free set-ups.
Wireless doorbell systems have become an increasingly popular option for persons wishing either to replace their current doorbell system or to add additional doorbells at their place of business or residence. A typical wireless doorbell system generally comprises at least one RF transmitter powered by a battery or other power source, such as existing electrical wiring, and a RF receiver [2]. In response to the depression of a button or other activating means on the transmitter, an electrical circuit is completed within the transmitter which energizes an oscillator or other means for generating a RF signal. The generated RF signal is then, with the aid of an antenna, transmitted a certain distance for reception by the receiver. The receiver alerts, for example, a homeowner that the doorbell button has been depressed by producing an audible signal, such as a tone or melody, upon detecting the transmitted RF signal [3].
1.2                                                  PROBLEM STATEMENT
Conventionally, doorbell is activated once the visitor approaches the door of the host by making contact / pressing the switch at the door, and this gives the visitor stress when locating the switch most especially at night when everywhere is covered with darkness. However, this device came into existence to overcome the problem of searching for the switch before a door alarm is rung. This device rings an alarm once the visitor approaches the door from a set distance using RF signal.

1.3                                             OBJECTIVE OF THE PROJECT
The main aim of the study is to build an arduino based wireless door bell. The objectives of the study are:

  • To build the system prototype
  • To alert the occupant to the presence of the visitor.
  • To interface arduino with rf circuits

1.4                                                 SCOPE OF THE PROJECT
Wireless doorbell systems which employ radio frequency (“RF”) transmitters and receivers. Both the transmitter and receiver is powered batteries or other power source, such as existing electrical wiring. The wireless transmitter, comprising a power source; a metal case divided into two or more electrically isolated sections by one or more electrically non-conductive gaps there between; a means disposed within said metal case for closing an electric circuit; an antenna enclosed within said metal case; a means for generating a radio frequency signal enclosed within said metal case; and an electric circuit connected to said power source, said means for closing said electric circuit, said antenna and said means for generating a radio frequency signal; wherein said means for generating a radio frequency signal is energized by said power source and a radio frequency signal is produced when said means for closing an electric circuit is moved to a position which closes said electric circuit.

1.5                                         SIGNIFICANCE OF THE PROJECT
A wireless doorbell does not have wires that hassle the installation. Installation is now simple. Installing the wireless doorbell is as easy as removing the installed wired doorbell and putting on batteries on the wireless doorbell and placing it to its location. Also, the wireless doorbell is portable; it can be moved wherever the homeowners like it to be placed. This would be very helpful for future remodeling or refurnishing of the house. Wireless doorbell is more versatile over Wired Doorbell.

1.6                                LIMITATION/ PROBLEM OF THE PROJECT

  • Both the Transmitter and Receiver parts of the circuit must be always turned on i.e. there should always be power.
  • No additional security like camera integration and hence, the ringer of the bell can’t be determined.

1.7                                          APPLICATION OF THE PROJECT
Since the mode of communication is RF, the range is considerably large that other wireless technologies.
The project is suitable for homes, shops, garages, hospitals, offices etc.

1.8                                                        METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

  • Study of the previous work on the project so as to improve it efficiency.
  • Draw a block diagram.
  • Test for continuity of components and devices,
  • Design and calculation for the device was carried out.
  • Studying of various component used in circuit.
  • Construction of the circuit was carried out.
  • Finally, the whole device was cased and final test was carried out.

1.9                                        PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to the study. In this chapter, the background, significance, application, objective limitation and problem of the study were discussed.
Chapter two is on literature review of this study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.


CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of an arduino based wireless door bell" is also available. Order full work to download. Chapter two of "design and construction of an arduino based wireless door bell" consists of the literature review. In this chapter all the related work on "design and construction of an arduino based wireless door bell" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of an arduino based wireless door bell" is available. Order full work to download. Chapter three of "design and construction of an arduino based wireless door bell" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of an arduino based wireless door bell" is available. Order full work to download. Chapter four of "design and construction of an arduino based wireless door bell" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and construction of an arduino based wireless door bell" is available. Order full work to download. Chapter five of "design and construction of an arduino based wireless door bell" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logomyyoutubelogo.html