DESIGN AND CONSTRUCTION OF AN ASTABLE MULTIVIBRATOR USING TRANSISTORS
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an astable multivibrator using transistors" Please, sit back and study the below research material carefully. This project topic "design and construction of an astable multivibrator using transistors" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an astable multivibrator using transistors" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an astable multivibrator using transistors" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF AN ASTABLE MULTIVIBRATOR USING TRANSISTORS
BY
---
EE/H2013/01430
DEPARTMENT OF ---
SCHOOL OF --
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of an astable multivibrator using transistors" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a B.Sc on --- has been approved.
By
Dr. --- Dr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Dr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work “design and construction of an astable multivibrator using transistors” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” visible for everyone, then the complete material on “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” is to be ordered for. Happy viewing!!!
The aim of this work is to design and fabricate an astable multivibrator. An Astable Multivibrator is an oscillator circuit that continuously produces rectangular wave without the aid of external triggering. Astable Multivibrator is also known as Free Running Multivibrator. The astable multivibrator is not stable and it repeatedly switches from one state to the other. Astable Multivibrator using transistor is very simple, easy to design, very stable and low cost. It can be used for timing from microseconds to hours.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- APPLICATION OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- LIMITATION OF THE PROJECT
- SCOPE OF THE PROJECT
- METHODOLOGY
- PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 OVERVIEW OF THE STUDY
2.2 HISTORICAL BACKGROUND OF THE STUDY
2.3 OPERATIONAL REVIEW OF ASTABLE
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BASICS OF THE SYSTEM
3.2 SYSTEM DIAGRAM
3.3 CIRCUIT DESCRIPTION
3.4 LIST OF COMPONENTS
3.5 OUTPUT WAVEFORM
3.5 DESIGN OF TRANSISTORISED ASTABLE MULTIVIBRATOR
3.6 THEORY OF COMPONENTS USED
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING OF SYSTEM OPERATION
4.4 PACKAGING
4.5 MOUNTING PROCEDURE
4.6 RESULT
4.7 COST ANALYSIS
CHAPTER FIVE
5.1 CONCLUSION AND RECOMMENDATION
5.2 REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
A multivibrator is an electronic circuit used to implement a variety of simple two-state devices such as relaxation oscillators, timers and flip-flops. It consists of two amplifying devices (transistors, vacuum tubes or other devices) cross-coupled by resistors or capacitors. The first multivibrator circuit, the astable multivibrator oscillator, was invented by Henri Abraham and Eugene Bloch during World War I. They called their circuit a "multivibrator" because its output waveform was rich in harmonics.
Multivibrators find applications in a variety of systems where square waves or timed intervals are required. For example, before the advent of low-cost integrated circuits, chains of multivibrators found use as frequency dividers. A free-running multivibrator with a frequency of one-half to one-tenth of the reference frequency would accurately lock to the reference frequency. This technique was used in early electronic organs, to keep notes of different octaves accurately in tune. Other applications included early television systems, where the various line and frame frequencies were kept synchronized by pulses included in the video signal.
Multivibrators are classified into three types based on the circuit operation, namely Astable multivibrators, Bistable multivibrators and Monostable multivibrators. The astable multivibrator is not stable and it repeatedly switches from one state to the other. In monostable multivibrator, one state is stable and remaining state is unstable. A trigger pulse is the root to the circuit to enter the unstable state. When the circuit enters into the unstable state, then it will return to the normal state after a fixed time. A bistable mutivibrator circuit is stable that can be changed from one stable to other stable by an external trigger pulse. This multivibrator circuit is also called as flip-flop which can be used to store one bit of data.
However, for the course of this work we are dealing with an astable type of multivibrator. This type of multivibrator includes two amplifying stages that are connected with a two capacitive-resistive coupling networks in a positive feedback.
The aim of this work is to design an astable multivibrator using transistors.
1.2 AIM OF THE PROJECT
There are three different types of multivibrator, but the main aim of this work is to design an astable multivibrator using transistor.
1.3 OBJECTIVE OF THE PROJECT
After completing this work, student involved would able to learn:
- What is an astable Multivibrator.
- How transistors are wired to works as an astable multivibrator.
- How it produces square wave.
- What is the role of capacitor in an astable multivibrator circuit.
1.4 SIGNIFICANCE OF THE PROJECT
The oscillation frequency can be measured manually by small modification. Transistors used are relatively cheap, stable and user-friendly circuit.
1.5 APPLICATIONS OF THE PROJECT
The applications of Astable multivibrators involve in radio gears to transmit and receive radio signals and also in time, morse code generators and some systems which require a square wave like analog integrated circuits and TV broadcasts.
1.6 ADVANTAGES OF THE PROJECT
These multivibrators are changes between one stable state to another continuously. This permits multivibrators to power themselves and achieve work at a constant rate without impact from any external forces or actions. Also, these multivibrators are low cost to produce, and simple to design.
- LIMITATION OF THE PROJECT
These multivibrators do not transfer the whole o/p signal to the i/p. This is due to resistance in the circuit, nonexistence of a totally closed loop at the o/p terminals, and the leaning of one transistor/capacitor to absorb energy at a somewhat different rate than the other. Although the amplifier restores the lost energy when it amplifies the signal, the signal will finally be too small to be of any use.
1.8 SCOPE OF THE PROJECT
This work is on transistor based astable multivibrator which is a type of cross-coupled transistor switching circuit that has NO stable output states as it changes from one state to the other all the time. The astable circuit consists of two switching transistors, a cross-coupled feedback network, and two time delay capacitors which allows oscillation between the two states with no external triggering to produce the change in state.
1.9 METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:
- Study of the previous work on the project so as to improve it efficiency.
- Draw a block diagram.
- Test for continuity of components and devices,
- Design and calculation for the device was carried out.
- Studying of various component used in circuit.
- Construction of the circuit was carried out.
- Finally, the whole device was cased and final test was carried out.
1.10 PROJECT ORGANISATION
This work is divided into five sections including this introduction. Section 2 is on the literature review and method of data collection are in Section 3. Results of findings are discussed in Section 4. The way forward is and conclusion in Section 5.
CHAPTER TWO: The complete chapter two of “design and construction of an astable multivibrator using transistors” is available. Order full work to download. Chapter two of “design and construction of an astable multivibrator using transistors” consists of the literature review. In this chapter all the related work on “design and construction of an astable multivibrator using transistors"
CHAPTER THREE: The complete chapter three of “design and construction of an astable multivibrator using transistors” is available. Order full work to download. Chapter three of “design and construction of an astable multivibrator using transistors” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of an astable multivibrator using transistors" is available. Order full work to download. Chapter four of “design and construction of an astable multivibrator using transistors” consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction of an astable multivibrator using transistors” is available. Order full work to download. Chapter five of “design and construction of an astable multivibrator using transistors” consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.