+234 8146561114 (MTN) or
+2347015391124 (AIRTEL)

DESIGN AND CONSTRUCTION OF AN AUTOMATIC EMERGENCY LIGHT CIRCUIT

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an automatic emergency light circuit" Please, sit back and study the below research material carefully. This project topic "design and construction of an automatic emergency light circuit" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an automatic emergency light circuit" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an automatic emergency light circuit" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

DESIGN AND CONSTRUCTION OF AN AUTOMATIC EMERGENCY LIGHT CIRCUIT

BY

---
EE/H2013/01430
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
SCHOOL OF ENGINEERING
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design and construction of an automatic emergency light circuit" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.

By
Engr. ---                                                     Engr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
 Engr. ---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work “design and construction of an automatic emergency light circuit” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “design and construction of an automatic emergency light circuit” visible for everyone, then the complete material on “design and construction of an automatic emergency light circuit” is to be ordered for. Happy viewing!!!


ABSTRACT

This low cost automatic emergency lighting circuit turns on a lamp during power failures. It is powered by a NiCad battery that is being charged by the main power line when there is no blackout. The circuit design is very simple and can be made by almost anyone. The voltage from the step down transformer is rectified by diode D1 and filtered by C1. The NiCad battery gets charged with about 100 mA via the diode D2 and resistor R1. The battery must have a capacity of at least 2 Ah to tolerate the charging rate.
When the main power supply fails during a blackout, the charging current is interrupted and a current flows from the base of T1 via resistor R2 which triggers the transistor to conduct and the two emergency lamps light up. When the main power returns, the charging current flows again through D2 and the transistor turns the lamps off.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0      INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

    1. PURPOSE OF THE PROJECT
    2. AIM OF THE PROJECT
    3. OBJECTIVE OF THE PROJECT
    4. PURPOSE OF THE PROJECT
    5. LIMITATION OF THE PROJECT
    6. ADVANTAGES OF THE PROJECT
    7. PROBLEM OF THE PROJECT
    8. APPLICATION OF THE PROJECT
    9. RESEARCH QUESTION
    10. PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

    1. OVERVIEW OF THE STUDY
    2. REVIEW OF THE RELATED STUDY

CHAPTER THREE
3.0     CONSTRUCTION METHODOLOGY
3.1      BASIC OF THE SYSTEM
3.2      BLOCK DIAGRAM OF THE SYSTEM
3.3      SYSTEM OPERATION
3.4      CIRCUIT DIAGRAM
3.5      CIRCUIT DESCRIPTION
3.6     DESCRIPTION OF COMPONENTS USED
3.7      POWER SUPPLY UNIT
CHAPTER FOUR
4.0      TESTING AND RESULTS

    1. CONSTRUCTION PROCEDURE AND TESTING
    2. INSTALLATION OF THE COMPLET DESIGN 
    3. ASSEMBLING OF SECTIONS
    4. TESTING OF SYSTEM OPERATION
    5. COST ANALYSIS

CHAPTER FIVE

    1. CONCLUSION
    2. RECOMMENDATION
    3. REFERENCES

CHAPTER ONE: The complete chapter one of “design and construction of an automatic emergency light circuit” is available. Order full work to download. Chapter one of “design and construction of an automatic emergency light circuit”consists of the literature review. In this chapter all the related work on“design and construction of an automatic emergency light circuit” was reviewed.

CHAPTER TWO: The complete chapter two of “design and construction of an automatic emergency light circuit” is available. Order full work to download. Chapter two of “design and construction of an automatic emergency light circuit” consists of the literature review. In this chapter all the related work on “design and construction of an automatic emergency light circuit” was reviewed.

CHAPTER THREE: The complete chapter three of “design and construction of an automatic emergency light circuit” is available. Order full work to download. Chapter three of “design and construction of an automatic emergency light circuit” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of “design and construction of an automatic emergency light circuit” is available. Order full work to download. Chapter four of “design and construction of an automatic emergency light circuit” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of “design and construction of an automatic emergency light circuit” is available. Order full work to download. Chapter five of “design and construction of an automatic emergency light circuit” consist of conclusion, recommendation and references.



To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.


For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No
:+2348146561114

E
mail Address :engr4project@gmail.com


CLICK HERE FOR MORE RELATED TOPICS/MATERIAL

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.