DESIGN AND CONSTRUCTIONOF AN AUTOMATIC GATE OPENING AND CLOSING SYSTEM USING INFRARED
The project is titled design and construction of an automatic gate opener using infrared. Opening and closing of doors is always a tedious job, especially in places like shopping malls, hotels and theatres where a person is always required to open the door for visitors.
This project proposes a system of automatic opening and closing of door by using remote. The remote sensor transmitter emit infrared radiation from a considerable distance and sends it to the receiver, commanding the receiver to either open the gate or to close it. This sensing signal is fed to a controller to operate a door motor through motor driver IC.
The remote sensor sends a logical command to open the door. The door automatically closes with a fixed time delay.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRCT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- AIM/OBJECTIVE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- SCOPE OF THE PROJECT
- LIMITATION OF THE PROJECT
- APPLICATION OF THE PROJECT
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
2.0 LITERATURE REVIEW
2.1 REVIEW OF PIR SENSORS AND ITS APPLICATION
2.2 THE ROLE OF SENSORS IN YOUR HOME SECURITY
2.3 TYPES OF MOTION SENSORS
2.4 OTHER MOTION SENSOR FEACTURES
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY3.1 BLOCK DIAGRAM OF THE SYSTEM
3.2 CIRCUIT DIAGRAM
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM OPERATION
3.5 COMPONENTS LIST
3.6 DESCRIPTION OF MAJOR COMPONENTS USED
CHAPTER FOUR
4.0 RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE AND TESTING
4.2 ASSEMBLING OF SECTIONS
4.3 CONSRUCTION OF THE CASING
4.4 TESTING
CHAPTER FIVE
- CONCLUSIONS
- RECOMMENDATION
5.3 REFERENCES
CHAPTER ONE
1.1 INTRODUCTION
An automatic gate opener using infrared involves open and closing a door using remote sensor: The most common single-technology sensor operated door uses passive infrared (PIR) energy to recognize the movement of heat in a protected space, and the sensor compose of the transmitter and the receiver.
This project proposes a system of automatic opening and closing of door by pressing a remote when we want the door to be close and vice-versa. This is achieved with help of a PIR (Passive Infrared) sensor. When the remote is pressed the sensor emits infrared energy which is been received by the receiver from a considerable distance. This sensing signal is fed to a controller to operate a door motor through motor driver IC.
When the remote is pressed, it sends a logical command to open or close the door. The door automatically closes with a fixed time delay. If there is no further movement within the PIR operating range. Interrupt signals are used through limit switches to avoid locked rotor condition of the motor.
1.2 OBJECTIVE OF THE PROJECT
The main objective of this work is to design a an automatic gate opener using infrared for homes, that is, to open and closing a door using remote.
1.3 SIGNIFICANCE OF THE PROJECT
Remote automatic doors operate with the help of sensors. Sensors do exactly what they sound like they’d do: they sense things. There are many different types of sensors that can sense different types of things, such as sound, light, weight, and motion.
For example, some automatic doors operate when they’re triggered by sensors that sense weight. These weight sensors might be disguised in a rubber mat in front of the door. When you step on the mat, the sensors send a signal to the automatic doors that tells them to open.
Other automatic doors operate on optic or motion sensors. These sensors might be mounted above a set of automatic doors or built on the top or the sides of the frame of the automatic doors.
When these optic or motion sensors sense motion nearby, they trigger the automatic doors to open and then close. This is why, when you approach a set of automatic doors, they will open as soon as you get close enough to activate the sensors.
Automatic doors have many useful purposes, which is why you can find them in many different types of locations. From supermarkets to airports and many types of large buildings, automatic doors make it easier for people to get into and out of buildings. They are especially helpful for people who are handicapped.
Similar to revolving doors, automatic doors also help to save energy, since they limit the amount of time that doors are open to only those times people are entering or exiting a building. And if you’ve ever shopped until your hands are full of bags.
This automatic gates do not need any physical effort to open or close. It has sensors, once the sensor senses the presence of human being it opens.
Automatic gates are durable, strong and can be available in customized sizes. It is a first security system of your property, giving you a sense of security. Automatic gates provide a security to your kids who can play safe inside the property without any interference of outsiders.
It is very convenient to enter and leave the automatic gates. You can activate even you are 20-30 metres away from it. No longer have you had to come down from your cars to open your gates.
1.4 LIMITATION OF THE PROJECT
- The establishment of electric entryways involves a good amount of money related use. This ranges from buying the gate to services for installation. to paying for the administration of the installers.
- Most of the companies give free after sales services to a certain period of time. However, it is super costly after the time period is lapsed.
- In case of power failure, malfunctioning system or anyone trapped inside your property, can cause inconvenience.
Remote control gates aren't just used for home security only. In industrial fields, they are used on assembly lines to keep track of the number of products and to shut down dangerous equipment if a person gets too close.
Here are a few other ways PIR sensors are used:
- To open and close automatic Doors
- To turn on and off automatic water faucets and toilets
- To turn on lights when a person enters a room
- To control ATM displays
- At automatic ticket gates
- For some parking meters
PIR sensors aren't just an additional feature of a security system—they are essential. Without sensors, there wouldn't be a way to detect intruders.
1.6 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to an automatic gate openning and closing system. In this chapter, the background, significance, objective limitation and problem of an automatic gate openning and closing system were discussed.
Chapter two is on literature review of an automatic gate openning and closing system. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
RELATED TOPICS/MATERIAL
1). DESIGN AND CONSTRUCTION OF A MOTION SENSOR LIGHT CONTROL SYSTEM
2). DESIGN AND CONSTRUCTIONOF AN AUTOMATIC GATE OPENING AND CLOSING SYSTEM USING INFRARED
3). DESIGN AND CONSTRUCTION OF AN AUTOMATIC MOTION SENSOR
4). DESIGN AND CONSTRUCTION OF PASSIVE INFRARED (PIR) BASED AUTOMATIC DOOR ALARM SYSTEM.
5). DESIGN AND CONSTRUCTION OF A PIR SENSOR BASED SECURITY SYSTEM
This material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We make abstract and chapter one visible for everyone.
All Project Topics on this site have complete 5(five) Chapters . Each Project Material include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
To view other related topics click HERE
To "SUMMIT" new topic(s) OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research for your new topic? if yes, click "HERE"
For more information call us on:+2348146561114 (MTN) or +2347015391124 (AIRTEL)
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.