DESIGN AND CONSTRUCTION OF AN ELECTRIC SHOCK GUN
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an electric shock gun" Please, sit back and study the below research material carefully. This project topic "design and construction of an electric shock gun" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an electric shock gun" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an electric shock gun" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF AN ELECTRIC SHOCK GUN
BY
---
EE/H2013/01430
DEPARTMENT OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of an electric shock gun" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.
By
Dr. --- Dr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Dr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work “design and construction of an electric shock gun” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “design and construction of an electric shock gun” visible for everyone, then the complete material on “design and construction of an electric shock gun” is to be ordered for. Happy viewing!!!
Electric shock gun uses a temporary high-voltage low-current electrical discharge to override the body's muscle-triggering mechanisms. The recipient is immobilized via two metal probes connected via wires to the electroshock device. The recipient feels pain, and can be momentarily paralyzed while an electric current is being applied. Electric shock guns are devices that put out a non lethal, high voltage shock! Touching an attacker will immobilized him for several minutes. The advantage of an electric stun gun is that it is non lethal and does no permanent damage. In spite this fact your attacker can be immobilized for as long as 15 minutes. Exactly how long depends on the voltage of the electric shock gun and the duration of contact.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- APPLICATIONS OF THE PROJECT
- LIMITATIONS OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- METHODOLOGY
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- REVIEW OF ELECTRIC SHOCK
- HISTORICAL BACKGROUND OF SHOCK GUNS
- KEY TERMS OF THE PROJECT
CHAPTER THREE
METHODOLOGY
- SYSTEM BLOCK DIAGRAM
- SYSTEM OPERATION
- SHOCK GUN CIRCUIT OPERATING PRINCIPLE
- SHOCK GUN CIRCUIT DESIGN
- HOW TO OPERATE STUN GUN CIRCUIT
- DESCRIPTION OF MAJOR COMPONENTS USED
CHAPTER FOUR
RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE AND TESTING
4.2 CASING AND PACKAGING
4.3 ASSEMBLING OF SECTIONS
4.4 TESTING OF SYSTEM OPERATION
4.5 INSTALLATION OF THE COMPLETED DESIGN
4.6 COST OF PRODUCTION
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTODUCTION
An electroshock weapon is an incapacitated weapon used for incapacitating a person by administering electric shock aimed at disrupting superficial muscle functions and/or causing pain without significantly hurting the subject. Multiple types of these devices exist differing by the mode of use. Stun guns, batons (or prods), and belts administer an electric shock by direct contact, whereas Tasers (conducted electrical weapons, CEW) fire projectiles that administer the shock through thin flexible wires. Long-range electroshock projectiles, which can be fired from ordinary shotguns and do not need the wires, have been developed as well. The electric stun gun tricks the muscles of an attacker, making them do a great deal of work rapidly. This instantly depletes the attacker's blood sugar by converting it to lactic acid. In short, he is unable to produce energy for his muscles, and his body becomes unable to function. This process is what makes electronic stun guns so simple yet effective.
Electric shock guns do not rely on high amperage, or pain, for results.The gun is designed to key into the nervous system. It interrupts the tiny neurological impulses that travel through the whole body to control and direct voluntary muscle movement. When the assailant's neuromuscular system is overwhelmed and controlled by the electronic shock gun, instant disorientation and loss of balance will result. Using electric stun guns are not dangerous. Should the assailant be touching you, the current will not pass to your body! Stun guns are a great protection device, but you should always be aware that these devices are not toys, and should not be treated as such.
1.2 OBJECTIVE OF THE PROJECT
The objective of this project is to construct a device that interrupts the tiny neurological impulses that travel through the whole body to control and direct voluntary muscle movement when make contact with living body, whether human being or animals.
1.3 APPLICATIONS OF THE PROJECT
- It can be used for security purpose for individuals from intruders.
- It can be used as protection from animals.
- It can be used as modern warfare equipment.
1.4 LIMITATIONS OF THE PROJECT
- Since this involves high voltage pulse production, the circuit is hazardous and should be implemented on hardware with uttermost care and precaution.
- One should not touch the output with bare hands as this high voltage, low current signal can send shock waves through the body, disrupting the nervous system.
- While designing the circuit, factors like corona discharge, stray capacitance are not taken into account, which may affect the output.
- This circuit should never be used in presence of persons with cardiac issues.
- It is actually to get a 9:1000 step up transformer at low frequency and its construction is quite complex.
1.5 SIGNIFICANCE OF THE PROJECT
Electric stun guns are devices that put out a non lethal, high voltage shock, Touching an attacker will immobilized him for several minutes. The advantage of an electric stun gun is that it is non lethal and does no permanent damage. In spite this fact your attacker can be immobilized for as long as 15 minutes. Exactly how long depends on the voltage of the electric stun gun and the duration of contact.
1.6 METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:
- Study of the previous work on the project so as to improve it efficiency.
- Draw a block diagram.
- Test for continuity of components and devices,
- Design and calculation for the changeover was carried out.
- Studying of various component used in circuit.
- Construct a digital changeover circuit.
- Finally, the whole device was cased and final test was carried out.
1.7 PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.
CHAPTER ONE: The complete chapter one of “design and construction of an electric shock gun” is available. Order full work to download. Chapter one of “design and construction of an electric shock gun”consists of the literature review. In this chapter all the related work on“design and construction of an electric shock gun” was reviewed.
CHAPTER TWO: The complete chapter two of “design and construction of an electric shock gun” is available. Order full work to download. Chapter two of “design and construction of an electric shock gun” consists of the literature review. In this chapter all the related work on “design and construction of an electric shock gun” was reviewed.
CHAPTER THREE: The complete chapter three of “design and construction of an electric shock gun” is available. Order full work to download. Chapter three of “design and construction of an electric shock gun” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of “design and construction of an electric shock gun” is available. Order full work to download. Chapter four of “design and construction of an electric shock gun” consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of “design and construction of an electric shock gun” is available. Order full work to download. Chapter five of “design and construction of an electric shock gun” consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.