DESIGN AND CONSTRUCTION OF AN INTELLIGENT VEHICLE OVER SPEED DETECTION AND REPORTING SYSTEM USING ARDUINO AND GSM
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm". Please, sit back and study the below research material carefully. This project topic (design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF AN INTELLIGENT VEHICLE OVER SPEED DETECTION AND REPORTING SYSTEM USING ARDUINO AND GSM
BY
---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" visible for everyone, then the complete material on "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" is to be ordered for. Happy viewing!!!
This work is on a device to detect rash driving on highways and to alert the traffic authorities in case of any violation. In past, lot of devices to detect rash driving on highways has been made.
This device is capable of detecting over speed vehicles running on road, Over speeding vehicle make lot of nuisance sometimes also leading to loss of lives and other damages. Project has two parts hardware part and software part. The central and intelligent unit of the model is arduino. Hardware design includes arduino, liquid crystal display (LCD), GSM, 5v cooling fan is used in place of actual vehicle, IR sensor And software includes the programming of Arduino according to layout whenever there is an over speed vehicle which cross the range of specific fixed RPM of that road then an alert in the form of message is send to the controlling authorities so that they can take necessary action. The sensor units are connected via common data line to ATMEL MEGA328P AU1722 Arduino. A SIM 800C GSM kit based network module, capable of operating in standard. GSM Bands has been used to send alert message.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- OBJECTIVE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- SCOPE OF THE PROJECT
- LIMITATION OF THE PROJECT
- APPLICATION OF THE PROJECT
- PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 OVERVIEW OF RECKLESS DRIVING
2.2 THE EFFECTS OF RECKLESS DRIVING
2.3 OVERVIEW OF SPEED LIMIT
2.4 HISTORICAL BACKGROUND OF SPEED LIMIT
2.5 ROAD TRAFFIC SAFETY
CHAPTER THREE
3.0 METHODOLOGY
3.1 INTRODUCTION
3.2 SYSTEM BLOCK DIAGRAM
3.3 HARDWARE ARCHITECTURE
3.4 SOFTWARE DEVELOPMENT
3.4 CIRCUIT DIAGRAM
CHAPTER FOUR
RESULT AND TEST ANALYSIS
4.0 RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4 RESULT ANALYSIS
CHAPTER FIVE
- CONCLUSIONS
5.2 REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
While driving on highways, motorists should not exceed the maximum speed limit permitted for their vehicle. However, accidents keep occurring due to speed violations since the drivers tend to ignore their speedometers.
Rash driving is the cause of many road accidents all over the world. The traffic population has increased considerably in Nigeria as there is no means to control or monitor the speed of vehicles running on roads. This system proves highly effective in detection of overspeed driving. It is not at all necessary that such accidents are results of driving under the influence of alcohol as even a person who hasn’t consumed alcohol can drive in a reckless manner [3]-[5]. To overcome this problem and decrease death rate due to accidents, introduction of new and innovative speed enforcement technology is necessary
Nowadays, rash driving causes a serious danger to the driver as well as general public. Despite the fact that rash driving is a serious problem, its current methods of detection by patrol officers lack sufficiency [6], [7].
In accordance with Association for Safe International Road Travel Report, around 1.24 million people die and 50 million people are getting wounded on the roads each year in the World. Statistically, they are assumed as the second important reasons for death. In order to overcome these problems, automobile industries and vehicle manufacturers have proposed various speed limiting techniques in order to keep up a vehicle and passenger safe. In this direction, the effort is going on devising the technology for vehicles that may aid the concerned authorities to have check over these issues [1].
With the rapid development of economy, there has been an increase of the number of accidents on road; over speeding poses a significant threat to public safety i.e both to driver and the public nearby the driven vehicle. In accordance with the above discussion, a system based on IR speed detector employing an arduino and GSM has been proposed.
1.2 PROBLEM STATEMENT
In past, lot of devices to detect rash driving on highways has been made. Most of the approaches require human concentration and involve a lot of effort, which is difficult to implement. In this paper we intend to design a system aimed at early detection and alert of dangerous vehicle driving patterns related to rash driving. The speed limit is set by the police who use the system depending upon the traffic at the very location. The time taken by the vehicle to travel from one set point to the other is calculated by control circuit and displays that on seven segment displays. Moreover, if the vehicle crosses the speed limit, a buzzer sounds alerting the police.
1.3 OBJECTIVE OF THE PROJECT
The objective of this work is to provide a digital display in accordance with a vehicle’s speed but also alert the police if the vehicle exceeds the permissible speed for the highway.
1.4 SIGNIFICANCE OF THE PROJECT
And in most of the cases main reason of accident is overspeed. Although all highways do have signboards indicating maximum speed limit for the sake of driver’s safety, but still people does not obey highway speed limit. This speed checker will come handy for the highway traffic police as it will not only provide a digital display in accordance with a vehicle’s speed but also sound an alarm if the vehicle exceeds the permissible speed for the highway.
1.5 SCOPE OF THE PROJECT
We have used two sensors in this project. These sensors detect the vehicle speed. Condition is that, the two sensors should be installed at a distance of 100 meters apart from one another. Liquid Crystal Display (LCD display) is connected to this project. This display will show the vehicle speed. It will also intimate user if vehicle speed crossed the maximum speed limit or not. The project also has a Buzzer. Overspeed condition is indicated by turning on the buzzer and the alert to the authority concern is done via SMS.
1.6 APPLICATION OF THE PROJECT
1. This can be used at Highways (National Highways, State level Highways).
2. This project can also be used inside university campus areas or inside any company’s premises.
1.7 LIMITATION OF THE PROJECT
- This project is valid for sequential flow of vehicles.
- It is only programmed for one vehicle.
1.8 FUTURE DEVELOPMENT
1. A CCTV Camera can be placed on the highway. If any vehicle has crossed the maximum speed limit then this camera will be triggered to take a picture of the vehicle.
2. We can add voice announcement system. It will intimate the driver that he/she has crossed the over speed condition.
1.9 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this speed checker. In this chapter, the background, significance, objective limitation and problem of this speed checker were discussed.
Chapter two is on literature review of this speed checker. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 OVERVIEW OF RECKLESS DRIVING
In United States law, reckless driving is a major moving traffic violation. It is usually a more serious offense than careless driving, improper driving, or driving without due care and attention and is often punishable by fines, imprisonment, or driver's license suspension or revocation.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" is also available. Order full work to download. Chapter two of "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" consists of the literature review. In this chapter all the related work on "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" is available. Order full work to download. Chapter three of "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" is available. Order full work to download. Chapter four of "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of an intelligent vehicle over speed detection and reporting system using arduino and gsm" is available. Order full work to download. Chapter five of "comparative analysis of bitter kola, moringa oleifera seed, and wonderful kola used for waste water treatment" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA: