USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an intruder detector alarm system with direction / location display". Please, sit back and study the below research material carefully. This project topic "design and construction of an intruder detector alarm system with direction / location display" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an intruder detector alarm system with direction / location display" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an intruder detector alarm system with direction / location display" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of an intruder detector alarm system with direction / location display" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of an intruder detector alarm system with direction / location display" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of an intruder detector alarm system with direction / location display" visible for everyone, then the complete material on "design and construction of an intruder detector alarm system with direction / location display" is to be ordered for. Happy viewing!!!

---

Direction/Location Displaywhich is capable of detecting intrusion at any location, sound and alarm and display the exact location of the intruder using seven segment displays. This project work is realized using top down methodology with active and passive components available in the local market. It is realized in different modules, all combined to form one function unit. The inputs are opto-couplers configured with laser diodes and light Dependent Resistor. (LDR) which act as the electronic eyes installed at the sensory points. The control unit is made up of one short delay circuit, audio frequency generator, priority encoder and decoder, piezo-buzzer and single digit seven segment display. The system is packaged in a well furnished wooden material. This system does not record/display the intruder. In a case of simultaneous intrusion, the display shows the location with the highest priority. And the system is powered from MAINS supply. The result being a system which can detect intrusion,, sound an audible alarm and displays the exact location of the intruder. It has a wide a range of application in surveillance especially in industrial home security.

TABLE OF CONTENTS
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1     BACKGROUND OF THE STUDY
1.2       PROBLEM STATEMENT
1.3  PREVIOUS WORK
1.4       OBJECTIVES OF THE STUDY
1.5       PROJECT STRUCTURE
CHAPTER: LITERATURE REVIEW
2.1 RESEARCH
2.1.1BURGLAR ALARMS
2.2 TRANSDUCERS
CHAPTER THREE
SYSTEM DESIGN
3.1 MICROCONTROLLER CIRCUIT DESIGN.
3.2 PIN DESCRIPTION
3.3 INTERFACING COMPONENTS 
CHAPTER FOUR
SOFTWARE DEVELOPMENT, SIMULATION AND CONSTRUCTION
4.1 INTRODUCTION
4.2 PORT PIN ASSIGNMENT 
4.3 PROGRAM FLOW
4.4 ALGORITHM
4.5 FLOW CHART
4.6 SIMULATION AND RESULTS
4.7       CONSTRUCTION
4.8       CIRCUIT DEVELOPMENT 
4.9       FABRICATION
CHAPTER FIVE
PERFORMANCE EVALUATION AND RESULTS
5.1 INTRODUCTION.
CHAPTER SIX
CONCLUSION AND RECOMMENDATION
6.1 CONCLUSION 
6.2       RECOMMENDATION AND FUTURE WORK
REFERENCES
APPENDIX 

CHAPTER ONE

INTRODUCTION

1.1     BACKGROUND OF THE STUDY

Security has been defined by Viola (2001) as safety from harm. It is a term that has different dimensions in psychology, public safety, defense and military matters and information access. Safety, also by Viola (2001) is defined as protection from action from without or subversion from within. Security and safety are always intertwined and it is impossible to design a security system without taking into account the safety of the object or person into consideration. Security in embedded systems is usually an afterthought. 
Considering the current global security environment, the importance of good physical security is difficult to ignore. Physical security services are becoming a private rather than public service i.e. individuals and organizations tend to hire private security firms and install security equipment and use the police as the back. According to the Bureau of Labor Statistics (2004), private security officers outnumber police officers by more than 2 to 1 in the United States of America. Recent reports suggest that this trend holds true for both daily security operations responding to terrorism, natural disasters. Physical security has seen less attention and it is primarily an applied field, it has no dedicated line of research. Instead, it is scattered through fields like engineering, computer science, chemistry and physics as well as social sciences such as criminology, sociology and psychology. Providing security relies on two main elements:

• Equipment or technology and
• People 

Without any statistical proof, it is the belief that major funding goes more into equipment security research than people security research. Others might disagree with this point of view for example, Pieters (2017) stated that General Eugene Habiger (retired), former commander of US strategic nuclear forces and advisor to the US department of Energy was quoted saying that “good security is 20% equipment and 80% people”. Human security, according to xiango (2015), has the tendency to want to cover more ground than actually securing the ground. Human security has several reoccurring problems which include:

• Disgruntled employees
• Professionalism
• Job characteristics
• Security structure and climate for security These reoccurring problems tend to disturb or halt the work to be done or carried out. 

Security system are gaining increase importance in recent times to protect life and valuable resources, many advanced method of providing security have been developed and are in use in the last few decades. Of this one important area is the security system required for military /strategic applications, which has advanced greatly. But such systems being complex and expensive are useful to high end application only. However with recent progress in technology and the growing need for increased security in civilian and other applications, many low cost solutions for security system have now emerged. In the field of Burglar Alarm Systems using modern approaches has become a major means of providing security in all applications, both military and civilian.
Due to high state of insecurity being experienced in the entire world the need to keep the occupants of the office aware of any intrusion in to their premises forms part of the project.

1.2       PROBLEM STATEMENT

Security is an important aspect of all our lives. A secure environment tends to give individuals rest of mind. However, with a global recession occurring, people have resorted to less honorable means to make ends meet. Theft rates (in a typical Nigerian University) have increased causing disharmony in the areas where such events occur. This sometimes leads to unpleasant occurrences such as fights and sometimes injuries. These injuries are either sustained when the culprit is caught and a mob action is decided upon. The aim of the proposed design is to reduce such occurrences by alerting the appropriate quarters while an unauthorized entrance into a room occurs. The relevance of this paper cannot be overemphasized.

1.3  PREVIOUS WORK

In Nigeria most security solutions are provided by security firms. These systems have been operation for some time which mostly is foreign developed. These translates that they tend to be expensive and hard to maintain because suppliers keep on producing new product and not supporting their older versions.
However this project is geared to development of office grown simple security system that meets the same needs as commercially available system. 
The final product will be cheaper, easy to maintain and foolproof.

1.4       OBJECTIVES OF THE STUDY

This project is aimed at designing, simulating and implanting a cheap and reliable alarm system using Small Scale Integrated and Medium Scale Integrated chips that can detect and warn on external intrusion.

The system has to satisfy the following:

• Ensure the security of an office by deterring person intending to burglar and warning the occupants of office of any unauthorized entry into their premise.
• Provide psychological satisfaction of being secure to the office occupant.

1.5       PROJECT STRUCTURE

Project was designed in the following modules:

• House Intrusion Module:

This module consists of motion detectors placed strategically in concealed location this sensors when activated should activate the following devices in the following sequence:-

• Activate buzzer to warn the occupants.
• If present, activate the cameras • Finally it should set off the alarm
• The Control Unit Module:

This is the decision making center that interprets the various inputs from the sensor and makes the appropriate logic decision.

• Arm and Disarm Module:

This is for arming and disarming the system.

• Alarm Module:

This is for warning and deterring the intruders.
 
Block diagram:

   Figure 1

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of an intruder detector alarm system with direction / location display" is also available. Order full work to download. Chapter two of "design and construction of an intruder detector alarm system with direction / location display" consists of the literature review. In this chapter all the related work on "design and construction of an intruder detector alarm system with direction / location display" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of an intruder detector alarm system with direction / location display" is available. Order full work to download. Chapter three of "design and construction of an intruder detector alarm system with direction / location display" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of an intruder detector alarm system with direction / location display" is available. Order full work to download. Chapter four of "design and construction of an intruder detector alarm system with direction / location display" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and construction of an intruder detector alarm system with direction / location display" is available. Order full work to download. Chapter five of "design and construction of an intruder detector alarm system with direction / location display" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: